Honeywell PRO 2000 Series Programmable Thermostat User Guide

PRO 2000 SeriesTH2110DV: For 1 Heat/1 Cool systemsTH2210DV: For 2 Heat/1 Cool heat pump systems onlyProgrammable ThermostatProduct Information 

A quick reference to controls

Quick reference to display screen

Set the time and day

1. Press the SET button, then press or to set the clock time.
2. Press the SET button, then press or to select the day of the week.
3. Press RUN to save & exit. M34811

Note: If the clock flashes, the thermostat will follow your settings for the Monday “Wake” time period until you reset the time and day.

Select the system and fan setting

Battery replacement

Install two fresh AAA batteries when Lo Batt flashes on the screen. Lo Batt appears for 60 days before the batteries are depleted.Replace batteries once a year, or when you will be away for more than a month. M34679Most settings are stored in non-volatile (permanent) memory. Only the clock and the day must be set after you replace the batteries.

To adjust program schedules

1. Press SET until Set Schedule is displayed.
2. Press or to set your weekday Waketime (Mo-Fr), then press SET.
3. Press or to set the temperature for this time period, then press SET.
4. Set time and temperature for the next time period (Leave). Repeat steps 2 and 3 for each weekday time period.
5. Press SET to set weekend time periods (Sa & Su), then press RUN to save & exit.

Note: Make sure the thermostat is set to the system you want to program (Heat or Cool).

CAUTIONEquipment damage hazardTo prevent possible compressor damage, do not operate the cooling system when the outdoor temperature is below 50°F (10°C).

Product ManualsSearch online for 69-2799EFS for the Owner’s Guide.Need Help?For assistance please visit http://honeywellhome.com/suppor