Category: Honeywell
-
Honeywell MIDAS-T-HTP Midas Gas Detector High-Temperature Pyrolyzer Option User Guide
Honeywell MIDAS-T-HTP Midas Gas Detector High-Temperature Pyrolyzer Option Introduction The MIDAS-T-HTP pyrolyzer option is installed underneath the standard Midas® gas detector. The air sample is drawn through the pyrolyzer to the sensor cartridge. The pyrolyzer converts perfluorocompounds (PFCs) present in the air sample into hydrogen fluoride (HF) by means of pyrolysis. The HF can then…
-
Honeywell BW RigRat Gas Area Monitoring User Guide
Honeywell BW RigRat Gas Area Monitoring User Guide User Interface Functions are controlled via the front-panel button. The display shows information such as monitored threats, real-time readings and measurement units, alarm type (when in alarm, including cal. overdue), battery status, datalog (if on), and radio and connection quality (if available). Note: Pumped version shown here……
-
Honeywell IntelliDoX Docking Module for BWC4 User Guide
Honeywell IntelliDoX Docking Module for BWC4 Intended UseUnless otherwise specified at time of purchase, IntelliDoX modules shipped from Honeywell. Are factory configured for use with portable gas detectors. Operate as stand-alone bump test and calibration stations. May be connected to a network via Ethernet cable for enhanced access to and control of administrative and maintenance…
-
Honeywell CT40-VD Vehicle Dock User Guide
CT40-VD Vehicle DockModel CT4O-VDQuick Start Guide Features Connect Power The vehicle that you conned the Vehicle Dock to should supply 2 A to the CT40. The operating temperature is -20 °C to 50 °C °F to 122 °F). Connect the vehicle dock power cable to the power adapter cable and screw the two cables together.…
-
Honeywell HF561 Fixed Wide-angle 2D Image Scanner User Guide
Honeywell HF561 Fixed Wide-angle 2D Image Scanner Please power off the computer before connecting the scanner, and then power on the computer after the scanner is fully connected. Power Adapter (if included) Note: Please refer to the user guide for the information on the cleaning equipment. USB Connection RS232 Connection Notes: The separated blue and…
-
Honeywell PC43K Integrated Print/Scan Solution User Guide
PC43KIntegrated Print/Scan SolutionQuick Start Guide Out of the Box Make sure the shipping box contains these items: · PC43K Power Adapter Power Cord Regulatory Sheet Note: Be sure to keep the original packaging in case you need to return the kiosk. Kiosk Features Load Media Power On About the Home Screen Navigation Buttons Button description…
-
Honeywell DX100i Termination Unit User Guide
DX100i Termination UnitQuick Start Guide INTRODUCTION The DX100 (I) Termination Unit is an explosion-proof junction box that provides a signal connection point and mounting point for the Honeywell Analytics Searchpoint Optima or Optima Plus gas detectors. Caution: The DX100 (I) Termination Unit can only be used withSearchpoint Optima or Optima Plus gas detectors. This guide…
-
Honeywell E3SAH E3point Gas Monitor User Guide
Honeywell E3SAH E3point Gas Monitor The E3Point® gas detection system combines a gas sensor (electrochemical or catalytic type), a control unit, a buzzer, a relay, and RS-485 in one reliable and robust product. The polycarbonate housing is resistant to rust, dents, and corrosion. It is well suited for commercial use in certain outdoor environments and…
-
Honeywell BWRR100D BW RigRat Multi-Gas Monitor User Guide
Honeywell BWRR100D BW RigRat Multi-Gas Monitor User Interface Functions are controlled via the front-panel button. The display shows information such as monitored threats, real-time readings and measurement units, alarm type (when in alarm, including cal. overdue), battery status, datalog (if on), and radio and connection quality (if available).Note: Pumped version shown here Charging The Instrument…
-
Honeywell evohome HR9 User Guide
evohome HR9 1 32325381 -001 B evohome 1. Press and hold SETTINGS for 3 seconds.2. Press the green tick 3. Press ADD ZONE.4. Type a name for the new zone and press the green tick 5. Press RADIATOR VALVE.6. If you want to control the zone…
