HOOVER Iron User Manual

HOOVER Iron User Manual

Parts Description

Introduction

Dear customer

First of all, we would like to congratulate you for purchasing this Hoover ironing system and to thank you for the confidence you have in Hoover brand.

This appliance has been manufactured with great care, respecting all of our quality criteria and has been tested several times. We hope its use will fulfil your expectations. We are strongly convinced that it will make your ironing much faster and better.

Before using your new Hoover appliance, please read carefully this user’s manual. If you need further information or if you encounter any trouble which are not noted in this manual, please contact the after-sales service or your standard dealer

Important Safety Instructions

Read this user manual carefully before you first use and save it for future reference.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• This product has been designed for domestic use only. In case of any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer is not responsible and the guarantee will not apply.
• Before connecting your appliance, check if the mains voltage is the same as the voltage indicated on your appliance and that the power outlet is connected to the earth.
• Ensure before each use that the electric cord or any other important part is not damaged.
• Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down.
• Never direct the steam towards persons or animals. Never direct the steam jet towards any other electrical or/and electronic appliances.
• The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
• If the appliance shows evidence of breakdown, malfunction, leakages. Please make sure it is checked by an authorized Service Centre to avoid any danger.
• Always make sure the appliance is switched off, unplugged and cooled down before doing any maintenance work.
• The iron must not be left unattended while it is connected to the supply mains and before it has cooled down.
• Do not unplug the appliance by pulling on the cord or on the appliance.
• Never immerse the iron, the stand, the cable or the plugs in water. Never hold them under the water tap.
• The soleplate of the iron can become extremely hot and may cause burns if touched. Never touch the electric cords with the soleplate.
• If the supply cord is damaged, it must be replaced by the manufacturer, service agent or similarly qualified persons in order to avoid a hazard.
• When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
• The plug must be removed from the socket-outlet before the water reservoir is filled with water.
• The surfaces with are liable to get hot during use.
• To have a electronic copy of the instruction manual contact the after sales service in guarantee card.
• The iron must be used and rested on a stable surface.

Chapter 1: Preparation for Use

Due to the powerful output of steam, Hoover recommends the use of an active ironing board with blowing and vacuuming function which allows escape of any excess steam.

Place the ironing system on a stable and level surface, for example on the hard part of an ironing board or on a heat-resistant surface.

IMPORTANT: Ensure your appliance is unlocked before switching the power on (Fig 4).

Chapter 1.1 : What Kind of Water May be Used?

The Hoover ironing system has been designed to be used with tap water only.

There is no need to use distilled or pure distilled water. Nevertheless, in case you live in a hard water area, you can mix 50% of distilled water with 50% of tap water.

Do not use any other kind of water or do not add other contents to water tank as it can damage your appliance.

Chapter 1.2 : Filling the Water Tank

Switch off the appliance and unplug it.

Open the water tank cap (7) to gain access to the water tank.

Fill the tank with Tap water and ensure you do not exceed the MAX mark.

WARNING: Do not add vinegar, hot water, perfume, or any other kind of chemical agents or any other contents in the water tank. IT COULD DAMAGE THE STEAM GENERATOR AND SHORTEN ITS LIFE USE.

Chapter 1.3 – Switching on the Appliance

Dry mode:

Connect the appliance with the mains cord to the earthed socket, press on the main switch (13), the light illuminate means the appliance is switched on. Turn the temperature dial (10) to your desired setting, the iron light (10) illuminates meaning the soleplate is heating up, after approximately 1 minute, the steam ready light (14) will light off, then you can start ironing.

Steam mode:

Connect the appliance with the mains cord to the earthed socket, press on the main switch (13), the light illuminates indicating the appliance is switched on. Then press on the “steam ON/OFF” button (15), the light will illuminate meaning the boiler is running.

Turn the temperature dial (10) to your desired setting, the iron light (10) illuminates , meaning the soleplate heating up. After approximately 2.5 minutes, the steam ready light (14) will light off, then you can start ironing.

Important:

If you want to switch from Dry mode to Steam mode, press steam ON/OFF button and wait around 2min for boiler heating up then press trigger, steam will come out.

if you want to switch from Steam mode to Dry mode, press steam ON/OFF button, you will see the light behind the button is off, then no steam will come out.

N.B.

The first time the appliance is used, some fumes, dust and a smell should appear.

It’s quite normal and will quickly disappear.

This is due to a treatment applied to the soleplate that improves the steam performance.

Before use, please use the iron as described in Chapter 2.4 Vertical Steam Ironing.

Chapter 2: Using Your Steam Generator

Chapter 2.1: Regulating the Soleplate Temperature

Select the temperature of the soleplate by turning the dial (12) on the iron to the desired position.

Wait a few moments until the iron light (10) is off.

This indicates that the soleplate has reached the required temperature.

While Ironing, the Iron light may switch on and off, this indicates that the temperature is being Adjusted automatically to maintain temperature so as not to interrup your ironing.

Help

To know the best suitable temperature for each textile, check the laundry care label of the article to be ironed. Please note that during use, the temperature light goes on from time to time. It signifies that the iron is heating up to the set temperature.

When ironing material with mixed fabrics, always ensure the temperature is set to the correct setting. If you select a lower temperature while ironing, wait until the iron has cooled down to the set temperature before you continue ironing.

If the temperature is too low, some drops of water could escape from the soleplate. Please raise up the temperature above the 2 dots (••) to avoid this issue.

Chapter 2.2 – Ironing

Dry Ironing

Select the temperature of the soleplate following the indications of chapter 2.1. Start your ironing without pressing the steam ON/OFF button (15), when the soleplate reaches the appropriate temperature.

Steam Ironing

Select the temperature of the soleplate following the indications of chapter 2.1. The steam will be ready to be used after press “steam ON/OFF” button, when steam ready light (14) disappear. From that time you can begin ironing and use the steam trigger. The steam flow stops when you release the trigger.

N.B.

During use, it is normal to experience some noise coming from your steam generator. It signifies that a pump injects water into the boiler. It’s better to avoid using the steam trigger at this precise moment to avoid pressure falls.

Chapter 2.3 – How to Choose the Correct Soleplate Temperature and Steam?

To obtain the best results, it is really important to set the correct temperature of the soleplate and the steam flow you are using. If correctly used, it will simplify your ironing and provide outstanding results, making ironing easier and faster.

Help

When steam ironing clothes on which shiny patches may occur, we recommend you to set the soleplate temperature to a lower temperature or iron the garment on the reverse.

Start with the fabrics that needed to be ironed at a lower temperature (•) and finish with those that needed to be ironed at the higher temperature (•••/Max).

Chapter 2.4 – Vertical Steam Ironing

Set the soleplate temperature (12) to the max temperature.

Hang curtains and clothes (jackets, suits, coats). Hold the iron in a vertical position at a short distance from the fabric to avoid burning it. Press the Steam trigger (11) to release the steam and move the Iron top to bottom.

WARNING: Do not direct the steam jet towards people or animals.

Chapter 2.5 – Refilling the Water Tank During Usage

You can fill the water tank at any time during use.

Open the water tank cap (7) and refill the water tank with the help of a bottle of water without exceeding the max mark level.

Please refer to chapter 1.2 for more detailed instructions.

Chapter 3: Maintenance and Cleaning

All the maintenance and cleaning operations have to be carried out when the unplugged appliance has cooled down for at least 2 hours, to prevent any risk of burns.

Chapter 3.1 – Cleaning the Appliance

Do not use any detergent or descaling products for cleaning the soleplate. Regularly clean it with a humid and non-metallic pad.

Empty the water tank after each use before storing it, to empty the water tank, press the trigger to release steam until no steam come out.

To clean the plastic parts of the stand, please use soft clothes.

Chapter 3.2 – Rinsing the Boiler for Scale Maintenance

In order to maximise the life of your appliance, you should rinse the boiler every 2 months to avoid scale deposit in the boiler.

Before proceeding, be sure that the appliance is cooled down and unplugged for at least 2 hours.

Place the stand on the edge of your sink and place the iron on a flat surface. Unscrew the Calc Clean Knob (9) and remove it. Fill the boiler with 0.2 Litre’s of tap water using a funnel or bottle. Shake the Steam Station and then empty the boiler completely of water into the sink. We recommend this operation is carried out twice. Once complete, refit the Calc Clean knob to the steam station by screwing into position.

In any case, do not use any descaling products to clean or rinse the boiler.

Chapter 3.3: Lock System

Switch off the appliance and unplug it.

Empty the water tank, to empty the water tank, press the trigger to release steam until no steam come out. Put the iron on the heat-resistant iron rubber studs (5). Wait at least 30 minutes allowing the soleplate and the generator to cool down.

Then follow the underneath indications in order to lock correctly your iron.

NOTE:

To lock the iron, you must ensure the soleplate is embedded in the rear rubber (3).

To unlock it, you must press the lock button then recover the hook to normal position.

Chapter 3.4: Cord Storage

Store the power cord with cord storage holder (1), and store the steam hose in the steam hose storage (8).

Then you can take away your appliance in order to store it safely and easily.

Troubleshooting

These are common problems you may encounter when using your appliance.

If you are unable to solve any issue please contact your local Hoover Service Office.

Important Information

Hoover spares and Consumables

Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. When ordering spare parts, always check your model number.

Hoover Service

Should you require service at any time, please contact your local Hoover Service Office. Please see all the contact details below.

Safety

Hoover believes that independent approval is the best way of demonstrating safety in design and manufacture. All Hoover iron systems have been manufactured in compliance of all safety regulations and approved by the most qualified independent approval certification bodies.

ISO 9001

Hoover’s factories have been independently assessed for quality. Our products are made using a quality system which meets the requirements of ISO 9001

The Environment

The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.

This product complies with the European Directives 2014/35/EU, 2014/30/EU, and 2011/65/EU.

CANDY HOOVER GROUP Srl Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

Your Guarantee

The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

Subject to change without notice.

Printed in P. R .C.PART No.: 48019759/02