HORI Nintendo Switch Wireless Controller User Manual

Instruction manualThank you for purchasing this product.Before using this product please read the instructions carefully.After reading the instruction manual, please keep it for reference.

Caution

  • Keep this product out of the reach of children under 3.
  • Keep this product away from small children. Seek medical advice immediately if it is swallowed.
  • Please be careful and not allow children to wrap the cord around their neck.
  • Keep the controller away from dusty or humid areas.
  • Do not use this product if damage or alteration occurs.
  • Do not get the product wet or leave it where it can get wet. It may cause an electric shock or defect.
  • Do not leave the product around a heater, audio amp, etc. Do not leave it under direct sunlight It may cause a defect.
  • Do not touch the metal parts of the USB plug with your finger or other metal material. It may cause injury or defect.
  • Do not apply strong impact or weight on the product.
  • Do not pull roughly or bend the cable of the controller.
  • Never disassemble, repair, or modify this product.
  • If product needs cleaning, use only a soft dry cloth. Do not use any chemical agents like benzine or thinner.
  • Do not use this product for anything other than its intended purpose. We are not responsible for any accidents or damages in the event of use other than the intended purpose.

Included

Platform

Nintendo Switch / PC(Xinput)

ImportantPlease read the Nintendo Switch instructions carefully before you use this product with the Nintendo Switch console.Make sure that your Nintendo SwitchTM is updated with the latest system software.

※ This product is not a wireless controller.※ Please be aware that unexpected action may occur if the Turbo function is used in the HOME Menu.

Layout

How to connect

Please insert the USB connector of the controller into the USB port of the Nintendo SwitchTM Dock.※ Do not connect to anything other than a USB port. It may cause a defect.

L/R to ZL/ZR Toggle Function

Switch button functions between L/R and ZL/ZR buttons.

How to switch

※ Settings will be saved even after you unplug the controller or turn off the power.※ To reset the button settings, repeat the “How to switch” process.※ Turning ON the Nintendo Switch while simultaneously pressing the ZL/ZR buttons with the USB connected will switch the button settings.

How to use the Turbo Functions

The Turbo hold function allows continuous rapid fiire without having to hold the button. (Pressing the assigned button deactivates this).The following buttons can be set to Turbo or Turbo hold mode:A Button / B Button / X Button / Y Button / L Button / R Button / ZL Button / ZR Button /Control Pad (UP / DOWN / LEFT / RIGHT)

* Control Pad (UP, DOWN, LEFT, or RIGHT) are not compatible with the Turbo hold mode, and can only be set to Turbo mode.

* The Turbo LED will flash at a rate corresponding to the Turbo speed. The Turbo LED will flash as long as one of the button is in Turbo mode.* By pressing the HOME Button, all Turbo functions and Turbo hold settings will be deactivated. When restarting gameplay, you will need to set the Turbo function again.* Turbo Function may not be compatible with all software titles. Please try adjusting the Turbo settings or simply turn OFF TURBO.* Turbo function will deactivate when you unplug the USB connector.

How to change Turbo Speed

You can adjust the Turbo mode to 3 different speeds.While pressing the Turbo Button, push up on the Right Analog Stick to change the Turbo speed in the following order :5 times/second → 10 times/second → 20 times/secondWhile pressing the Turbo Button, push down on the Right Analog Stick to change the Turbo speed in the following order :20 times/second → 10 times/second → 5 times/second* Turbo speed is set to 10 times/second by default.* Right Stick must be returned to the neutral position before changing to the next turbo speed.* The Turbo LED will flash at a rate corresponding to the Turbo speed for 2 seconds.

Main Features

■ External dimensions : (width) 103mm × (depth) 141mm × (height) 69mm■ Cable length : (Overall length) Approximately 3 m■ Weight: About 230g■ Rating : 5V … 45mA

  • This product is not a wireless controller.
  • This product is not equipped with vibration function.
  • The image on the packaging may differ from the actual product.
  • The manufacturer reserves the right to change the product design or speciications without notice.
  • Nintendo Switch logo, Nintendo Switch are trademarks of Nintendo.
  • HORI & HORI logo are registered trademarks of HORI.

Target age: 6 years and over

HORI Nintendo Switch Wireless Controller User Manual – HORI Nintendo Switch Wireless Controller User Manual –

[xyz-ips snippet=”download-snippet”]


Posted

in

by