Deadbolt Keyless Entry Door Smart Lock
Smart Lock ManualV1. 20201026
CONTENTS
1. INTRODUCTION
02
1.1 Specifications
02
1.2 Dimensions
03
1.3 Door drill hole map
03
1.4 Package Includes
04
2. INSTALLATION GUIDE
05
2.1 Check the Door Dimensions
05
2.2 Confirm the direction of the door
06
2.3 Install Deadbolt
08
2.4 Install Keypad
08
2.5 Install Mounting Plate
09
2.6 Connect the IC wired and Install the Back Panel
10
2.7 Insert Battery and Install Back Battery Cover
10
3. APP Operation Guide
11
3.1 Download the APP “TTLock”
12
3.2 Register a new account
12
3.3 Match the Smart Lock with APP
12
3.4 APP function introduction
13
3.5 APP Account Management or Other Operation
16
4. How to unlock/lock my door lock with the SMART WATCH?
18
5. Under what situations will the smart lock sound an alarm?
18
6. If the smart lock is in a non-addable state
19
7. FQA
20
If you have any questions please feel free to contact us, w e are alw ays here to help you. Email: <1>
1. INTRODUCTION1.1 Specifications
Anti-theft Alarm Prompt Reset Button
Communication mode Unlock/Lock Way Support System Unlock time Power supply Working current
Item No.
S110BBL
Dimension
137*60*37mm
Material
Zinc Alloy
Weight
1.3kg
Bluetooth 4.0ble Bluetooth,code,Mechanical key
Android 4.3/ ios 7.0 above
1.5 sec
30A 200mA
< 2 >
1.2 Dimensions2.36″
0.47″
5.39″
1.3 Door drill hole mapFold on door edge
1.14″
0.4ins”
1.5″-1.9″ The door thickness range :1.5″-1.9″
2.67″v”
2.28″”
2.2″ 0.98″”‘”
2.36″ >=4.33″ The width of the door frame >=4.33″< 3 >
1.06″
1.4 Package Includes KI
O
C
D
J
L
N
M F A
B
E
G
H
A*2 B*1 C*1 D*1 E*1
F*4
Key
Keyhole Keypad
Cover
Deadbolt
G*1 H*1
Strick Plate
Plastic Look Groove
I*1
J*3
K*1
L*2
Mounting Plate
Receive Module
M*1
N*1Battery Cover
O*1Card Needle
< 4 >
2. INSTALLATION GUIDE2.1 Check the Door DimensionsDoor Frame 4.33″ Door Thickness: 1.5″-1.9″ Compare the reference card and select the reference line that matches the door size. Note: Install and test lock with door open to avoid being locked out. Note: When performing this operation, please take protective measures and be careful of the metal edge injure yourself.Fold on door edge
0.4″
1.5″-1.9″ The door thickness range :1.5″-1.9″
2.67″
2.28″
2.2″ 0.98″
2.36″ >=4.33″ The width of the door frame >=4.33″
1.06″
<5>
2.2 Confirm the direction of the door
Hinge
Hinge
Left-handle Open into room
Right-handle Open into room
If the door is left handle. 1.To install the lock for left side handling, ensure the toggle button on the back assembly is set to “L”. 2.Setting direction of the knob: Horizontal for Left handle when in unlock status.
If the door is right handle. 1.To install the lock for right side handling, ensure the toggle button on the back assembly is set to “R”. 2.Setting direction of the knob: Vertical for Right handle when in unlock status.
<6>
If the door is left handle.
If the door is right handle.
L RPlease sure it is “L”
L RPlease sure it is “R”
Please sure it is Horizontal when unlock state.
Please sure it is Vertical when unlock state.
<7>
2.3 Install DeadboltInsert the deadbolt”E”and ensure it is parallel to the door face, use “F”to secure deadbolt. Note: Need to stay this way up when inserting the Deadbolt.E F2.4 Install KeypadInstall “D”into keypad inner plate. Note: The flat ruler remains horizontal during the installation process.Install “D”keep the flat ruler in horizontal state.<8>
The front panel to pass through the hole and deadbolt. Note: Please ensure the flat ruler is horizontal during installation, the IC wired need under the deadbolt and as like as the picture.IC Wired2.5 Install Mounting PlateThe IC wired around the column of the mounting plate as picture. Install “J”.IC wired Install”J”flat ruler<9>
2.6 Connect the IC wired and Install the Back PanelConnect the IC wired, and Install the Back Panel, install “L”and “M”.
Install”L”
L R
Install”M”
2.7 Insert Battery and Install Back Battery CoverTips: 1. Alkaline batteries are recommend in order to stabilize the power supply, if you don’t use alkaline, battery performance will be reduced greatly. 2. All setting will be retain in the memory even if the batteries are complete dead. If batteries are complete dead, using 9v backup battery to unlock the door.
<10>
Insert 4pcAA1.5V Alkaline batteries and slide the battery cover back onto the receiver module.
Low Battery Alarm: You can open your front door with a 9v battery on the instant charging if you forget to replace the low batteries.
3. APP Operation Guide
3.1 Download the APP “TTLock”
9V
Android Mobile Phone–Search “TTLock” from Google Play. Apple Mobile Phone–please search “TTLock” from App Store.
<11>
3.2 Register a new account (phone number or email)3.3 Match the Smart Lock with APPWhen matching, please follow the prompt steps of the program, you need to touch the screen, match the blue icon lock , and set the name for the lock. Such as the front door.<12>
3.4 APP function introduction3.4.1 Lock/Unlock (APP/Keypad) Via APP: Touch to unlock, long press to lock. Note: Please keep your phone near the door lock within 5 meters. Via Keypad: Enter #passcode# on the keypad to unlock the door lock. Long press “#” and hold 2s to lock the door lock.3.4.2 Sent Ekey You can add multiple accounts on the app. Such as your family member. You can authorize the Recipient to unlock/lock via the APP. The recipient needs to download the APP. Note: This operation need to be connected to Bluetooth and network, the shared eKey will be stored in “eKeys”.<13>
3.4.3 Generate Passcode You can set a variety mode of password to unlock, or share them with others. Yourself or the recipient of passcode to unlock by entering the passcode on the keypad. Note: This operation need to connect Bluetooth or gateway. The passcode will be stored in “Passcodes”.<14>
3.4.4 Records It records who comes and goes, and when. For 24/7 access logs, get all records about the door unlock/ lock anytime and anywhere.3.4.5 Settings For the Bluetooth lock function setting: 1. Basics Battery Percentage. Lock name. Admin Passcode (You reset your admin passcode on the APP) 2. Unlock Remotely ( Need to buy a gateway, you can remotely control your lock after pairing.) 3. Auto Lock ( 5s,10s,15s,30s,60s,Custom) 4. Lock Sound 5. Read Operation Record, etc. Note: These operations require Bluetooth to be turned on and a smart lock is connected.<15>
3.5 APP Account Management or Other Operation3.5.1 How do I reset or change my APP account login password?<16>
3.5.2 How to pair the G2 Wi-Fi gateway to APP? ( If you have already purchased a gateway. )
Click it
Click it
Choose G2
Click Next
Click it
Enter your wifi password
Pairing your lock
<17>
4. How to unlock/lock my door lock with the SMART WATCH?
Support Smart Watch (iwatch or Android watch) to lock/unlock.
08:15:56
If the watch is connected to the phone, but it can’t to search the “TTLock” App. Try to log in to the home page at your phone app and refresh, then check in the watch. If all settings are normal but can’t lock/unlock. Opening the “TTLock” App in your phone to check if the key is in a normal state.
Apple watch Android watch
Note: All the operations, your watch and mobile phone require a certain range, the mobile phone network and Bluetooth need to remain connected.
5. Under what situations will the smart lock sound an alarm?5.1 The smart lock sounds an alarm when the battery is low. Solution: Please replace the battery or temporarily use the 9V backup battery.
5.2 The Anti-theft Alarm Prompt button is not tightly pressed. Solution: Always press and hold the alarm button on the front panel during installation, otherwise it will always beeping when the battery is inserted.
<18>
5.3 When someone breaks into your home or the lock is loose. Solution: You will find a record of illegal operation in the record. Then you can check if the lock is illegal operation or Loose state.
Anti-theft Alarm Prompt
5.4 If you want the smart lock to never sound an alarm. Solution: Turn off the anti-theft alarm: Enter “*32# (admin password) #0#” on the keypad. Turn on the anti-theft alarm: Enter “*32# (admin password) #1#” on the keypad. Note: Keep the alarm button on the front panel always pressed when install, otherwise it will always beeping when put in the battery.
6. If the smart lock is in a non-addable state (the lock name is gray on the APP or cannot be find)
Solution: Please press and hold the reset button 3s-5s until you hear the sound “DiDi” and try to connect again. Note: This operation IC wired and battery need to be installed. This button is in the front Keypad panel.
Reset Button
<19>
7. FQAThe solution for details of FQA, please refer to the Instructions Guide. If necessary, please connect with our customer service.
Question
Answer
Why does the deadbolt is stuck out of work?
The IC cable is stuck with the locking tongue. You need to correctly place the IC line according to the installation instructions of Install Inside Mounting Plate.
If you can’t control your lock OR the lock is the opposite state, for example, when you unlock but the lock not w ork.
Please sure the flat rules is vertical state. If it is the left side door, please sure the toggle button set to L, the knob is vertical when in unlock status.If it is the right side door, please sure the toggle button set to R, the knob is horizontal when in unlock status.
How to unlock/lock via keypad?How to unlock/lock via APP?How to open the keyhole cover?How do I set admin passcode on the keypad? ( If this lock is not added to the phone )
Long press “#” on keypad and hold 2s to lock . Enter #passcode# on keypad to unlock.Touch to unlock, long press to lock. (Please keep your phone near the door lock within 5 meters.) Use 2 pins to press the left and right holes of the cover at the same time.Entering “*12#123456#Custom Admin Password#Confirm Password #” on the keyboard.
How do I reset admin Main Menu-Settings-Basic-Admin Passcode (Checking passcode on the APP? Settings Part)
How to get a Wi-Fi gateway?
You can purchase an additional”G2″ gateway, and also to contact our customer service.
<20>
QuestionsDoes it support voice control by alexa?How do I set up automatic lock?
AnswerYes, it support voice control by alexa, but it need to matching with Wi-Fi Gateway.Main menu-Settings-Auto Lock (Checking Settings Part)
What does the difference between Send eKey and Generate Passcode?
Send eKey: You can add multiple accounts on the app. Such as your family member. You can authorize the Recipient to unlock/lock via the APP. The recipient needs to download the APP. Generate Passcode: You can set a variety mode of password to unlock, or share them with others. Yourself or the passcode recipient to unlock by entering the passcode on the keypad.
This product have a 12 months warranty. If you have any questions about our smart locks, please feel free to contact us! If you interested in the “G2” Gateway, please let me know. Email:
<21>
report this adThis product have a 12 months warranty. If you need the install video, please feel free to contact us! Email: Toll Free: +1(8 6 6 )-9 8 5 -9 9 0 9 Skype: live:.cid.b5 e5 2 f f ce0 0 5 2 d2 e
[xyz-ips snippet=”download-snippet”]