KAMVAS 22 PlusGS2202User Manual
Precautions
Please read this manual carefully before using it, and keep it well for future reference.
–Before cleaning the display, please unplug the USB cable and wipe with a soft damp cloth, do not use any kind of detergents.–Please don’t place the display near water sources such as bathtub, washbasin, sinks, washing machine, damp basement, swimming pool, etc.–Do not place the display on where is unstable or a height for children to reach easily in order to avoid danger.–Do not place the display and digital pen close to the magnetic field.–The grooves and holes on the back case are designed for ventilation to prevent the monitor from overheating. Please don’t place the display on beds, sofas, carpets, or embedded devices.–Only power supplies shown on the nameplate can be used for the display. If you have questions about the power supply which you are using, please consult the distributor of your display.–To protect your display, please switch off the power when it is not in use. During blackouts or not using for a long time, please unplug the display from the socket.–Make sure no foreign bodies get inside the monitor through grooves and prevent liquid from splashing on the display to prevent short-circuit or fire.–If the display has a breakdown, do not open the main case and try to repair it by yourself. Please ask for service for proper repair and maintenance.–When the following situations occur, please unplug the power adapter and you may need a service for full repair and maintenance:
A. The power wire or plug is damaged or worn out;B. There is liquid splashed inside of the display;C. The display has fallen or the LCD is broken;D. When obvious abnormalities occur to the display.–While getting the components replaced, you are supposed to guarantee that the repairman is using the substitute components specified by the manufacturer. Unauthorized component replacement might cause fire, electric shocks, or other dangers.
Product Overview
2.1 Display IntroductionThanks for choosing HUION ® KAMVAS ®22 Plus creative display. This is a new genus of desktop-level professional drawing display, which can greatly improve your coefficiency of painting and creation, and is full of fun. You can freely paint and write, depicting different lines and colors, just as the pen writes on the paper, which brings you a real experience.To give you a better understanding and use of your display, please read this user manual carefully. The user manual only shows the information under Windows, unless otherwise specified, this information applies to both Windows and Macintosh systems.2.2 Product and Accessories2.2.1 Accessories
2.2.2 Adjustable StandWe designed this ergonomic adjustable stand especially for your KAMVAS display, you can adjust the angle of the display according to your usage habit, and make you feel more comfortable when painting and creating.
By dragging this switch to adjust the stand angle from 20°-80°
2.3 Setting Up Display[1] Take out the pen display and stand from the package, then assemble the stand to the back of the display with the attached screwdriver according to the following instruction.
[2] Connect the pen display to your computer with 3-in-1 Cable or USB-C to USB-C Cable.1) Connect the display to your computer with 3-in-1 cable; Connect the power adapter to the power cable.
2) Connect the display to your computer with USB-C to USB-C cable; Connect the power adapter to the power cable.
2.4 Install Driver2.4.1 OS SupportWindows 7 or later, macOS 10.12 or later.2.4.2 Install DriverPlease download the driver from our website: www.huion.com/downloadAfter finishing the installation, you can find the driver icon
in the system tray area, which means the driver was installed successfully; when you connect the display to the computer, the icon will change to color
, which means the driver has already recognized the display and you can start using it now.
Notes:[1] Before installing, you need to uninstall another driver of similar products, including the old driver of this product.[2] Before installing, please close all graphics software and anti-virus software to avoid unnecessary mistakes.
2.4.3 Driver PageAfter the download is successful, double-click to open the driver, connect the display to your computer with attached cables.When the connection is complete, watch for a prompt at the bottom left of the driver page that displays two states “Device disconnected” or “Device connected”.
Pen Basic Operation
3.1 Hold the penHold the pen as you hold a normal pen or pencil. Adjust your grip so that you can toggle the side switch easily with your thumb or forefinger. Be careful not to accidentally press the switch while drawing or positioning with the pen.
Notice:When not in use, place the pen in the pen case or on the desk. Do not place the pen on the surface of the screen, which may interfere with the use of other screen cursor positioning equipment, may also cause your computer can not enter sleep mode.
3.2 Position the cursorMove the pen slightly above the active area without touching the screen surface, the cursor will move to the new position accordingly.Press the pen tip on the screen to make a selection. Tap the screen once with the pen tip, or touch it to the screen with enough pressure to register a click.
3.3 ClickUse the pen tip to tap once on the screen to register a click. Tap to highlight or select an item on the screen and double-click to open it.
3.4 MoveSelect the object, then slide the pen tip across the screen to move it.
3.5 Use the side buttonsThe buttons on the pen can be set to two different customizable functions.You can use the buttons whenever the pen tip is within 10mm of the display active area.You do not have to touch the pen tip to the display in order to use the switch.
3.6 Pen Nib ReplacementThe nib will be worn off after using it for a long time, then you need to replace a new nib.[1] Anticlockwise rotate the pen holder to open the cover, take a new nib out.[2] Insert the pen nib into the pen nib clip and tilt the pen to pull out the old nib.[3] Insert the new nib straight into the pen and push the nib slowly and firmly until it stops.
OSD Buttons
| : | Power on/off the display. | |
| : | Press to call up the menu, after entering the menu, its function is “confirm”. | |
| : | After entering menu, its function is “to up/right/increase”. | |
| : | After entering menu, its function is “to down/left/decrease”. | |
| : | Before entering the menu, its function is “auto adjustment”. After entering menu, its function is “back to the previous menu”. |
Function Setting
5.1 Working Area Setting5.1.1 Using Multiple MonitorsSelect the Working Area tab to define the relationship between pen movement on the display and cursor movement on the monitor screen. By default, the entire active area of display maps to the entire monitor. If more than one monitor is in use and you are in extended mode, you need to choose the related monitor on the driver interface to which you are going to map to.If your monitors are in mirror mode (All monitors display the same content), the display maps to the entire space on each monitor and the screen cursor is displayed on each monitor simultaneously.
5.1.2 Working Area SettingDefine the display area that will be mapped to the screen area.[1] Full Area: the entire active area of the display. This is the default setting.[2] Screen Ratio: As a general rule, be 16:9.[3] Customized Area:1> Enter coordinate values.2> Drag the corners of the foreground graphic to select the screen area.
5.1.3 Rotate Working AreaBy changing the direction of the display to adapt to the left and right-hand operation. You can rotate the display by 0°, 90°, 180° or 270°.
5.2 Display SettingClick the ” ” in the upper right corner of the driver to set the Display, including General settings, Hotkeys, and Updates.
5.2.1 General settingsAdd App: Shortcut key function can be set by adding different programs.When opening different programs, the driver will automatically recognize that the shortcut function is the corresponding function set.
5.2.2 Hotkeys settingsSet the shortcut key to quickly open the driver interface. The default value is Ctrl+Alt+H, which can be set according to usage habits.
5.2.3 UpdatesYou can view the driver version number, click “Check for Update”, view the latest driver version, and update according to the system prompt.
5.3 Pen Buttons Function SettingSelect the function to be achieved on the pop-up dialog box, then click “Apply” or “OK” to take effect.
5.4 Enable the Windows Ink FeatureMicrosoft Windows provides extensive support for pen input. Pen features are supported in such as Microsoft Office, Windows Journal, Adobe Photoshop CC, SketchBook 6, and so on.
5.5 Pressure Sensitivity SettingThe pressure sensitivity will be changed by dragging the slider up and down, the smaller the value, the more pressure sensitive.
Drag upward (left): the pressure change is more obvious, small pressure produces a great pressure.Drag down (right): pressure change is weak, a lot of pressure produces less pressure.Click the button at the bottom right of the Settings box to reset the pressure sensitivity to the default state.For example: applying *N respectively the same pressure, under different pressure coefficients produced different pressure effects. According to their habit of holding the pen posture and the size of the hand for the appropriate pressure Settings.5.6 Pen Pressure TestingYou can gradually apply pressure to the stylus on the screen to test the pressure level. Click ” ” button to clear all the ink.
5.7 Pen Nib Activity SettingThe pen nibs can be set to be Active/Inactive as needed. Click the drop-down option to select, and click OK again to save the settings. In Active mode, the digital pen can be used normally. In Inactive mode, the digital pen has cursor movement, but cannot complete the specified action.
5.8 Data Export and ImportThe driver supports exporting and importing your custom configuration data of the product, which is convenient for you to use different software and avoid the trouble of repeated settings.
Specifications
|
Model |
GS2202 |
|
| Screen | Panel Size | 21.5 inches |
| Resolution | 1920 x 1080 (16:9) | |
| LCD Type | IPS | |
| Active Area | 476.64 x 268.11mm | |
| Contrast Ratio | 1200:1 | |
| Brightness | 220cd/m2 | |
| Response Time | 14ms | |
| View Angle | 89°/89° (H) /89°/89° (V) (Typ.) (CR ＞ 10) | |
| Gamut | 140% RGB | |
| Display Color | 16.7M (8bit) | |
| Touch | Touch Type | Battery-Free Electromagnetic Resonance |
| Resolution | 5080LPI | |
| Pressure Level | 8192 | |
| Accuracy | ±0.5 mm (Center), ±3 mm (Corner) | |
| Sensing Height | 10mm | |
| Pen | Model | PW517 |
| Dimension | 163.7 x Φ14.3 mm | |
| Buttons | Two Customized Press Key | |
| General | Output Voltage | 12V 3A |
| Video Interface | 3-in-1 USB-C and USB-C to USB-C | |
| Dimension | 546.06 x 323.07 x 19.1~26.7mm (Without Stand) | |
| Net Weight | 3.9kg (With stand) | |
| OS Support | Windows 7 or later, Mac OS 10.12 or later |
Trouble Shooting
7.1 Possible Breakdowns Related to DISPLAY
| Abnormal Phenomena |
Possible Solutions |
| Power indicator does not flash | 1. Make sure power is on.2. Check the socket and power cable. |
| No display on the screen | 1. Make sure power is on.2. Correctly connect the cables.3. If you connect the display with a laptop, please make sure the display is on the right display mode: extend or duplicate mode.4. Check whether the side indicator shows green, if not, it means no signal in. Please reboot your computer or reconnect the cable.5. Is the signal wire broken or bent? If so, please replace the signal wire. |
| No signal | 1.Make sure the cables are well connected.
2. If you use a desktop, make sure the HDMI port is plugged into the graphic card on the tower, but not into the motherboard. 3. If you use a Windows OS computer, make sure to press ”Windows+P” on the keyboard, then choose Duplicate or Extend. Don’t choose Computer Only or Projector Only. 4. If there is no HDMI port on your computer, you need an extra HDMI adapter. We don’t recommend a USB to HDMI adapter. Also, we don’t recommend a USB hub. We recommend DVI/ VGA/ Display Port/ Type-C/ Thunderbolt, etc. to HDMI adapters. |
| Images are blurred | Please set the display resolution to 1920 x 1080. |
| Displays wallpaper & taskbar of computer monitor only. | 1.t is because you are under extended mode right now. It is a normal situation.
2.If you are not familiar with the extended mode, we recommend you to use in Duplicate/Mirror mode. Windows OS: Press keyboard combination—Windows+P—then choose DuplicateMac OS: System Preference—Displays— Arrangement— Check “Mirror Displays”.3.If you decide to use in Extended mode. Make sure to choose pen display as Work Area in Driver. It is usually ”Display 2”. |
| Lack of colors | Check the pins of the signal wire are not bent or fractured. |
| There is chromatic aberration | As the regional color temperature is different, so minor chromatic aberration is a normal phenomenon. |
| Images jitter or ripple images appear | It is likely that there is electric equipment nearby that brings about electronic interference. |
References
[xyz-ips snippet=”download-snippet”]