HYGIPLAS Countdown Timer Instruction Manual

Countdown TimerInstruction manual

Model: DP028

Features

  • Big Digit Display
  • Loud Buzzer Sound
  • Pocket Clip
  • Foldaway Stand
  • Magnetic attachment
Maximum Count down/ up range Hour/Minute mode: 19 hours 59 minutes Minute/Second mode: 99 minutes 59 seconds
Digit increment Hour/Minute mode: 1 minute Minute/Second mode: 1 second
Accuracy ±2 seconds every 99 minutes 59 seconds
Display size 47(W) x 20(H) mm
Battery 1.5 V, size MA or equivalent, 1 piece (included)
Product size 63(W) x 63(H) x 15(D) mm (Clip portion excluded)

Installation

  1. Slide down battery cover.
  2. Install battery with correct polarity positioning.
  3. Peel off display protective sheet.
  4. The unit will display “00 00” and is ready for use.

Note: For the [HR/MIN] switch on the back, you can set it to [HR] to enter Hour/Minute mode or [MIN] to enter Minute/the Second mode.

Operation

  1. Press [HR-MIN] and [MIN-SEC] to set the desired count downtime.
  2. Press [START/STOP] to start the timer. The buzzer will sound when the display counts down to “00 00”.
  3. Press [START/STOP] to stop the timer and the preset value will be displayed.
  4. Press [HR-MIN] and [MIN-SEC] simultaneously will clear display value to “00 00”.
  5. Press [START/STOP] to start to count up.
  6. When the display counts up to the maximum range, it will re-count from 0.

Remove the batteries if you will not be using the appliance for an extended period of time.

Compliance

Dispose of depleted batteries in accordance with local regulations, within the EC there are nominated disposal points for batteries.

The WEEE logo on this product or its documentation indicates that the product must not be disposed of as household waste. To help prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.HYGIPLAS parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities. HYGIPLAS products have been approved to carry the following symbol:

All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of HYGIPLAS. Every effort is made to ensure all details are correct at the time of going to press, however, HYGIPLAS reserve the right to change specifications without notice.

DECLARATION OF CONFORMITY

Equipment Type Model
Countdown Timer (Min/Sec) DP028
Application of Territory Legislation & Council Directives(s) Electro-Magnetic Compatibility (EMC) Directive 2014/30/EU – recast of 2004/108/EC

IEC EN 61000-6-1:2019EN 61000-6-3: 2007 +A1:2011

Restriction of Hazardous Substances Directive (RoHS) 2015/863 amending Annex II to Directive 2011/65/EU

Producer Name Hygiplas

I, the undersigned, hereby declare that the equipment specified above conforms to the above Territory Legislation, Directive(s), and Standard(s).

Date 2nd November 2020
Signature
Full Name Ashley Hooper Eoghan Donnellan Josie Holt
Position Technical & Quality Manager Commercial Manager/ Importer Commercial Manager/ Responsible Supplier
Producer Address Fourth Way,Avonmouth,Bristol,BS11 8TBUnited Kingdom 42 North Point BusinessParkNew Mallow RoadCorkIreland 15 Bagdally Road,CampbelltownNSW 2560

UK +44 (0)845 146 2887
Elite
NL 040 — 2628080
FR 01 60 34 28 80
BE-NL 0800-29129
BE-FR 0800-29229
DE 0800 — 1860806
IT N/A
ES 901-100 133
PT [email protected]
AU 1300 225 960
report this ad

DP028_ML_80x110mm_v4_20201112

DP028_ML_80x110mm_v4_20201112.indb 202020/11/12 15:23

[xyz-ips snippet=”download-snippet”]


Posted

in

by