ColebyMini Cot Bed
IMPORTANT! RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
Thank you for choosing Ickle Bubba. This cot bed conforms to BS EN 716:2017 and BS 8509:2008 + A1:2011. To ensure that your cot bed is used in accordance with these instructions, please read them fully your child’s safety may be affected if you do not follow these instructions. A child’s safety s your responsibility. Assembly should be carried out by a competent adult only.
WARNING Do not use more than one mattress in the cot bed.
WARNING Do not use the cot/child’s bed near heat sources, windows, and other furniture.
WARNING Be aware of the risk of an open fire and other sources of heat, such as electric bar fires, gas fires, etc. in the near vicinity of the cot bed.
WARNING Do not use the cot/child’s bed if any part is broken, torn or missing. Use only spare parts approved by the manufacturer.
WARNING Do not leave anything in the cot bed or place the cot bed close to another product, which could provide a foothold or present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords, etc.
- Please be aware that the lowest base position is the safest and the base should always be used in that position as soon as the baby is old enough to sit unaided.
- The thickness of the mattress chosen should be such that the internal height (surface of the mattress to the upper edge of the cot frame) is at least 500mm when the base is set in the lowest position and a minimum of 200mm when the cot base is set in the highest position.
- We recommend you use the Ickle Bubba Mattress Size 120 x 60 cm for this cot bed. The mattress should be no more then 30mm shorter or narrower than the internal length or width of the cot bed.
- To prevent injury from falls, as soon as the child is able to climb out of the cot then it should be changed into the bed mode for use up until 4 years of age.
- The cot bed is designed to be dismantled for storage or transportation.
- Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be placed to other furniture or windows, and should be placed either tight to the wall or have a gap of 300mm between the wall and the side of the bed.
- All assembly fittings should be tightened properly and care should be taken to ensure that no screws are loose, as a child could trap parts of the body, r clothing (e.g. ribbons, drawstrings, necklaces) this could lead to strangulation.
- During assembly, children should be kept away from the product due to the possible risk of injury.
- Wood is a natural material, the color will darken with age.
 |
 |
1+3: 43-001-SHE2+3: 43-001-SFE4: 43-001-SSI5: 43-001-SBAA+B+C: 43-001-SFP
1
Do not fully tighten the screws until assemby is complete
2
3
4
ROUTINE CARE & MAINTENANCERegularly check that all fittings and components of the cot/bed are fully tightened and in working order.– For cleaning, use only a mild detergent and warm water.– DO NOT USE abrasives, bleach, alcohol, or ammonia based household polishes
Due to constant updating and improvements, some components may occasionally differ slightly from the images shown in these instructions. We reserve the right to change the specifications of any products without prior notice. If you need any assistance, please contact your Ickle Bubba retailer from whom you purchased your product, who will take appropriate action.
References
[xyz-ips snippet=”download-snippet”]