ICYBOX 8bay 2.5″ SATA/SAS HDD backplane
Features
- 8x 2.5″ SATA or SAS HDD/SSD in only 2x 5.25″ bay
- Anti-Vibration Technology
- HDD´s up to 15mm heights
- Aluminum and Stainless Steel
- Alarm for overheating and fan failure
- SATA I/II/III host interface 6.0 Gbit/s
- With key lock to secure the HDDs
- LED for power, HDD access, Fan Alarm
- Ø 7 cm fan (2400 / 3000 rpm
- Hot Swap
- 2x SATA Power Connector 15pin
- 8x Data Signal Connector 7pin
Packing Content
1x IB-2280SSK, 8x SATA cables, 2x keys, 24x screws, 1x short Manual
Product view
- HDD power LED (blue) & HDD access LED (Purple blinking)
- Triangle Safety lock
- Fan Status LED (red for failure)
- Temperature Status LED (red for failure)
- 8x 7 Pin SATA data signal connector
- 2x 15pin power connector
- FAN speed switch high (3000 rpm) / low (2400 rpm)
- HDD LED switch (on/off)
- External HDD access signal connector
- External temperature & FAN failure signal connector
LED Function
HDD connected: |
LED 1 |
= blue |
HDD access: |
LED 1 |
= purple blinking |
Fan failure: |
LED 3 |
= red |
Temperature failure: | LED 4 |
= red |
Technical Data
HDD/SSD |
8x 2.5″ SATA/SAS HDD/SSD |
HDD height |
6 ~ 15 mm |
Form factor |
2x 5.25″ bay |
Dimension (WxHxD) |
159x146x85 mm |
Material |
Aluminum with anti-rust coating |
HDD Interface support |
SATA I/II/III (6 Gbit/s)SAS I/II (6 Gbit/s) |
Weight |
1.3 kg |
Overheating temp |
60°C |
Cooling fan |
1x 7×7 cm / up to 3000rpm |
Installation
- Turn OFF the power to your computer and any other connected peripheral devices.
- Unplug the power cord from the back of the computer and remove your computer‘s cover.
- Put the Backplane in one free 2x 5.25″ bay and fix it with the screws.
- Connect the 8x red SATA connectors to the referring connectors on the main board.
- Connect the 2x internal Molex power cables to the power supply of your PC. Replace the computer cover and reconnect the power cord.
© Copyright 2015 by RaidSonic Technology GmbH. All Rights ReservedThe information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes no responsibility for any errors contained in this manual. RaidSonic Technology GmbH reserves the right to make changes in the specifications and/or design of the above mentioned product without prior notice. The diagrams contained in this manual may also not fully represent the product that you are using and are there for illustration purposes only. RaidSonic Technology GmbH assumes no responsibility for any differences between the product mentioned in this manual and the product you may have.
References
[xyz-ips snippet=”download-snippet”]