6XX
Thank you for purchasing the CAN Signature 6XX from ZEN series. The CAN Signature 6XX is a balanced headphone amplifier optimized for Sennheiser HD 6XX headphones.
- Power switch
- Input channel switchInput 1: RCAInput 2: Single-ended 3.5mmInput 3: Balanced 4.4mm
- PowerMatch selection: 0dB/6dB/12dB/18dBWe recommend starting from 0dB and then increasing the switchable gain level to attain an enjoyable and comfortable level of volume from the headphones.Warning: at the outset do not use excessive gain, otherwise, damage to hearing or connected headphones may ensue. AMR/iFi audio is not responsible for any damage/injury from misuse.
- Analogue Volume ControlAt normal listening levels, the volume control should be around the 12 o’clock position. Increase the gain level to enjoy a higher listening level.
- Single-ended 6.3mm outputFor connecting single-ended 6.3mm headphones. With single-ended 3.5mm headphones, connect with a 3.5mm to 6.3mm adapter.
- Balanced 4.4mm analogue outputFor connecting balanced 4.4mm headphones.Tip: As the Sennheiser HD 6XX headphones use a balanced design, we recommend the 4.4mm balanced output.
- HD 6XX LEDHeadphone corrections optimized for Sennheiser HD 6XX headphones.
- space Matrix LEDThe space Matrix(on/off ) recreates a holographic sound field.It is a pure analogue signal processing circuit designed for listening to headphones as if one was listening to speakers. This addresses the ‘music inside the head’ sensation, which makes for unsettling listening.Tip: Sonically-hindering DSP is NOT used for HD 6XX nor XSpace Matrix systems. They use the highest-quality discrete components and operate purely in the analogue domain. Hence all the clarity and resolution of the original music is retained.
- SettingsThis button chooses between:– Off– HD 6XX– space
- Balanced 4.4mm analogue inputThis is a balanced analogue input.
- Single-ended 3.5mm analogue inputFor connecting single-ended 3.5mm input.
- RCA analogue inputThis is an analogue input.
- Balanced 4.4mm analogue outputThis is an analogue output via 4.4mm > XLR or other balanced interconnects. You could use this for an active speaker.Tip: As the ZEN CAN Signature6XX is balanced, this is the recommended output.
- DC 5V powerPlease connect the ZEN CAN Signature HFM to the enclosed power supply, the super-silent iPower2. The ZEN CAN Signature HFM must ONLY be powered by 5 volts.
Specifications
Input voltage: | DC 5V/2.5A |
Max Output: | |
Balanced: | >15.1V/385 mW (@ 600 Ohm)>11.0V/1890 mW (@ 64 Ohm)>6.2V/1200 mW (@ 32 Ohm) |
S-E: | >7.6V/98 mW (@ 600 Ohm)>7.4V/870 mW (@ 64 Ohm)>7.2V/1600 mW (@ 32Ohm) |
THD & N: | |
Balanced: | <0.006% (@ 360 mW/2.4V 16 Ohm) |
S-E: | <0.005% (@ 100 mW/1.27V 16 Ohm) |
SNR: | |
Balanced: | >121dBA (@ 15.2V) |
S-E: | >120dBA (@ 7.6V) |
Max. Input: | |
Balanced: | 7.4V RMS |
RCA: | 3.8V RMS |
3.5mm: | 1.92V RMS |
Gain: | 0dB, 6dB, 12dB and 18dB |
Frequency Response: | 10Hz – 200kHz (-3dB) |
Power consumption: | No Signal~5WMax Signal~12W |
Dimensions: | 158 x 117 x 35 mm6.2″ x 4.6″ x 1.4″ |
Net weight: | 550 g (1.21 Ibs) |
Warranty period: | 12 months |
Specifications are subject to change without notice.
ifi-audio.comVer1.3
References
[xyz-ips snippet=”download-snippet”]