TROUBLE SHOOTING: ADJUSTABLE BENCH
PROBLEM:Bench is wobbly
SCAN QR CODE FOR VIDEO EXPLANATION: https://www.youtube.com/watch?v=OXZH-pw2fgk&feature=youtu.be
Solution:If the Bench is wobbly, it could be that the mainframe was attached too tightly before the feet were added.
In general, it is best to tighten pieces hand-tight during assembly; and once all the pieces are attached, then bolts should be made wrench-tight. If everything is tightened wrench-tight from the start, it can throw off how the rest of the apparatus ts together.
Fixing it is as easy as loosening a few bolts and retightening them!Loosen the bolts that connect the mainframe to the front leg (bolt #13 in the manual). This should give the leg/feet a bit of wiggle room. Move the feet as needed to make them all level on the ground.
If your bench is still wobbly, check that the large bolt (M12*125) that connects the back cushion and the seat cushion to the main frame is tightened adequately. You will need a wrench and a socket to tighten this bolt adequately.
If you are still having issues after following these steps, please email us at [email protected]
[xyz-ips snippet=”download-snippet”]