Model: iBTW20TIMEBASEWireless Charging Stand + Speaker
Quick Start GuideQUESTIONS? visit www.ihomeintl.com
FEATURES & FUNCTIONS
– Press to Play/Pause audio or to answer calls– Press and Hold to end or ignore a call– Press & Hold to activate Google/Siri
FRONT PANEL
BOTTOM PANEL*
*Before use, remove the battery pull tab
BACK PANEL
DISPLAY ICONS
To adjust the brightness of the display, press the Time Set Button repeatedly.
GETTING STARTED
Step OneConnecting the UnitRemove the battery pull tab from the bottom of the unit. Connect the included AC adapter to the DC jack on the back of unit and the other end to a working wall outlet.
Step TwoConnecting to Bluetooth
- Press and hold Bluetooth Pairing Button on the TIMEBASE to enter pairing mode.
- Select ‘iHome iBTW20’ on the Bluetooth menu to connect!
Step ThreeSetting the Time
- Press and hold Time Button until display flashes.
- Use +/- Buttons to adjust the time.
- Press Time Button to confirm.
- Use +/- Buttons to adjust year, and press Time Button to confirm.
- Use +/- Buttons to adjust the month, and press the Time Button to confirm.
- Use +/- Buttons to adjust the date, and press the Time Button to confirm settings.
SETTING THE ALARM
- Press and hold Alarm-Button until display flashes.
- Press – or + Buttons to adjust alarm time (hold for rapid setting).Set the correct AM/PM alarm time. PM indicator appears on the display.
- Press the Alarm Button to confirm alarm time. Choose alarm schedule: 7 (every day), 5 (weekdays) or 2 (weekend only). Press the – or + Buttons to select schedule.
- Press the Alarm Button to confirm. Use – or + Buttons to set wake to source:Tones: Wake to tones. Press – or + Buttons to select.Bluetooth: Wake to audio from a connected Bluetooth device.Beep: Wake to beeping.
- Press the Alarm Button to confirm. Use – or + Buttons to control alarm volume and press Alarm Button to confirm settings. The alarm icon on the display indicates the alarm is armed.
- To turn off a sounding alarm and reset it to come on the next day, press the Alarm Button.
PREVIEWING THE ALARMPress and release the Alarm Button to preview the alarm and to toggle the alarm ON (indicated by the alarm icon) or OFF (no alarm icon).
PROGRAMMABLE SNOOZE
- Press and hold ZZZ Button during normal operation (when no alarm is sounding).
- Press + or – Buttons to select a snooze time (1-29 minutes).
- Press ZZZ Button to confirm. When an alarm is sounding, press down on ZZZ Button to temporarily silence the alarm (9 minutes isthe default).
WIRELESS CHARGINGSupports:
- Qi-compatible phones (with plastic cases up to 3mm thick*)Place Qi-compatible device face up on charging rest:
Wireless Charging LED under iHome badge shows charging status:Slow blinking LED: The device is charging properly.Solid LED: Device is charged.Rapid blinking LED: Device not charging. Reposition device.(LED may continue to blink slowly when iOS devices are fully charged.)CAUTION:Remove the metal protective or magnetic case from the phone before charging. When charging the phone, do not place magnetic-striped or other metal objects on the charger. Doing so could damage the object or this unit. Qi-compatible phones with metallic-looking finishes will charge normally.* Some larger size phone cases may not be able to charge. Remove case to charge phone properly.
USB CHARGINGConnect a USB cable (not included) to the USB port on the back of the unit to charge devices. (Unit must be plugged into a working outlet to charge devices.)
BATTERY BACK-UPA CR-2450 backup battery is installed to provide continuous clock settings if a temporary power failure occurs. Remove the battery pull tab before use. When the battery icon on the clock display is flashing, replace the backup battery. The battery compartment is on the bottom of the unit.
- The AC adapter must be connected, or you will lose time and alarm settings during battery replacement.
- Use a Phillips screwdriver to open the battery compartment door.
- Remove the exhausted battery and insert 1 CR-2450 battery, with the + side facing you. Replace door. Do not overtighten.
WARNING
- Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
- Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.”
- CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- The mains plug of the power adaptor is used as the disconnect device, it shall remain readily operable.
IMPORTANT SAFETY INSTRUCTIONSPlease heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
- Do not use this product near water, and clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this product during lightning storms or when unused for long periods of time.
- Damage Requiring Service – This product should be serviced by qualified service personnel when:– Plug has been damaged.– Objects have fallen into or liquid has been spilled into the enclosure.– The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.– The unit exhibits a marked change in performance or does not operate normally.
- No naked flame sources, such as lighted candles, should be placed on this product.
- Attention should be drawn to the environmental aspects of battery disposal.
- This product is suitable for use in tropical and/or moderate climates.
- WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
- Do not dispose of batteries in the household trash or fire.
- The mains plug of the power adaptor is used as the disconnect device, it shall remain readily operable.
| AC adapter Information for ErP (EU) requirement | |
| Manufacturer’s name and address | SDI Technologies Inc.1299 Main Street, Rahway, NJ 07065, U.S.A. |
| Model | BQ30B-0903000-M |
| Input voltage | AC100-240V |
| Input AC frequency | 50/60Hz |
| Output voltage | DC9V |
| Output current | 3A |
| Output power | 27W |
| Average active efficiency | 89.% |
| Efficiency at low load (10%) | 88.% |
| No-load power consumption | 0.05W |
This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).This means that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.
For product support information please visit:www.ihomeintl.com/help/iBTW20© 2020 SDI Technologies, Inc. All rights reservedQuestions? Visit www.ihomeintl.com
report this adiBTW20EQSG-042020-A
References
[xyz-ips snippet=”download-snippet”]