iHOME UV-C Sanitzer iUV30 User Manual

iHOME UV-C Sanitizer iUV30

Thank you for purchasing the iUV30 UV-C Sanitizer! This superior quality UV-C LED light safely kills up to 99.9% of surface germs in under 3 minutes, without using harmful chemicals. The UV-C Sanitizer is safe to use on everyday essentials including glasses, smartphones, cosmetic tools, toothbrushes, and more.

SETUP

  • Connect the included 10V power cable to your sanitizer.
  • Plug the other end into a wall outlet.
  • NOTE: Use ONLY the supplied adapter to power your sanitizer. Do not use adapter for other devices or equipment.

USING THE UV-C SANITIZER

Lift the lid of the iUV30 and place items to be sanitized inside the cabinet, making sure not to overlap items. Close the lid. UV-C source

  1. Press and hold the Sanitize Button for 2 seconds to turn the iUV30 unit ON or OFF. The Status Indicator will flash once, then turn solid white.NOTE: the unit will turn ON automatically once connected to the power source.
  2. Press and release the Sanitize Button to begin a UV sanitizing cycle. The Status Indicator will flash during the sanitizing cycle, and will glow solid white to indicate the cycle is complete. Each cycle lasts around 3 minutes.
  3. Flip the object over and sanitize the opposite side for optimum effect.
  4. The unit will sleep after 5 minutes of inactivity, and the Status Indicator will shut o . Press the Sanitize Button to wake the unit.

SAFETY SWITCH: A built-in safety switch will shut o the UV light whenever the lid is opened. Do not attempt to defeat the safety function and operate the unit with an open lid.(Press and release the Sanitize Button to disable the sanitizing process.)

For questions, full instructions, warranty, and additional safety information, please scan the QR code or visit:www.ihome.com/help/iuv30

FOR SAFE USE

WARNING – Use this device only for its intended use as described in this manual. If the device is not used in the manner specified, the protection provided by the equipment may be compromised. Always place device on a flat, smooth surface, in a horizontal position for operational use.

WARNING – DO NOT ATTEMPT TO OPERATE THIS DEVICE WITH THE LID/TOP OPEN. The device was designed to shut o automatically when the lid/top is open. It is important NOT to defeat or tamper with this safety feature as UVC light can cause damage to eyesight and skin. All users should be alerted to the potential hazards indicated by the product safety labeling on the unit and these instructions.

WARNING – KEEP OUT OF REACH OF CHILDREN. This device is not a toy and is not intended to be used by children.ATTENTION: Use only the supplied power adapter. This product must only be supplied at safety extra low voltage corresponding to the marking on the appliance.ATTENTION: Prolonged or excessive exposure to UV-C light may degrade and discolor fabrics, plastics and other non-metallic materials. Keep operation away from strong magnetic fields.

IMPORTANT SAFETY INSTRUCTIONS

  • Always disconnect power to the device before performing any cleaning or maintenance.
  • Device is intended for indoor use only, do not use outdoors or on wet surfaces.
  • Device should be protected from the elements and from temperatures below freezing.
  • Do not operate/drop near water or while bathing or swimming, do not handle the device with wet hands.
  • Only use as intended. Use according to this manual’s instructions without tampering or modifying the device in any way.
  • Do not alter the construction or design. Do not remove safety labels, markings or devices.
  • Do not operate if any damage to the unit is visible or suspected, such as after being dropped.
  • Do not use if charging cable/cord is damaged. · Keep the cable/cords and device away from heated surfaces.
  • Close supervision is necessary when any appliance device is used by or near children and people with special needs.
  • Do not look directly at the UV-C source.
  • Do not operate in the presence of explosives and/or flammable fumes, smoke or liquids.

Caring for your DeviceShould the casing of your device become soiled you may wipe down with a moist cloth.Do not immerse the device into water or any cleaning solvents.Do NOT use gasoline, benzene, thinner, harsh cleaners, etc. on and/or in the unit while cleaning as they will damage the product.NEVER use alcohol or other solvents.

Disclaimer: This product is not intended to diagnose, treat, cure or prevent any disease or medical condition. The information provided herein is not to be construed as a medical diagnosis or medical advice. No medical claims are implied or intended with the sale of this device. Purchaser accepts responsibility for correct and proper use of device.

FCC Information

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

ISEDC Information

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:(1) This device may not cause interference.(2) This device must accept any interference, including interference that may cause undesired operation of the device.The device comply with ISEDC RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

© 2020 SDI Technologies, Inc. All rights reserved

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,