iiglo IICQI04 Tradlos Lader Stoff Fast Wireless Charger Instruction Manual

iiglo IICQI04 Tradlos Lader Stoff Fast Wireless Charger

Specification

• Input DCSV,2.0ADC9V,l.67A
• Output: 5W{7.SW/10W
• Frequency: ll0-2051\HZ
• Dimensions: 4>90 X9.5mm
• Charging distance: .;1omm
• Conversion: >n.%
• NW.:95g

Connect to Power Adapter

1. Connect the power adapter to socket.
2. Connect adapter to the Type -C interface, the other Type-C ID pad.
3. The standby indicator light is GreenNote: This product works with Type-C to Type-C charging cable. Only QC 2.ostand1rd power adapter support this product’s quick charge function. You need to buy power adapter separately.

Charging Mode

1. Make sure the wireless charger dock connect to the power supply.
2. Put the Qi-enabled smartphone properly on the transmitter, the indicator light becomes blue and start charging. The device, enter to standby mode when take away the phone from charging pad.Note: When Samsung phones which are built-in wireless charging function get fully charged with this product, if don’t move the phone in a long time, the battery power keeps In fully charged status(supplementary charge).

Notes:

1. Do not squeeze or subject to any kind of shock or knocking.
2. Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage.
3. Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
4. Do not place too close with magnetic stripe or chip cards ( ID cards, Bank Cards, etc.) to avoid magnetic failure.
5. Please keep the distance at least 20cm between implantable medical devices ( pacemakers, implantable cochlear, etc.) and the wireless charger to avoid potential interference with the medical device.
6. To take care of the children, to ensure that they won’t play the wireless charger as a toy, to avoid unnecessary accidents.

Imported by iiglo0stre Kullersd 4, N-3241 Sandefjord, Norway www.iiglo.comMade in China