ikan LIVECOM 1000 Wireless Intercom System User Manual

LIVECOM 000 User Manual

DESCRIPTION

Thank you for purchasing IKAN LIVE COM 1000 full-duplex wireless intercom system. With the DECT protocol technology, LIVE COM 1000 is widely used in the areas of the studio, stage events, EFP, webcasting, filmmaking, etc. With a clean line of sight (LOS), the transmission range of LIV ECOM1 000 reaches up to 300m with full-duplex wireless communication and carrier-grade voice quality.

KEY FEATURES

  •  1000ft Communication Range, Carrier-Grade Voice Quality
  • 9GHz Frequency Bandwidth
  • Full-Duplex Wireless Communication
  • Built-In Lithium Batteries, with Longer than 8 Hours Run Time on a Full Charge (Beltpacks)
  • Up to 4 Beltpacks Communication Simultaneously (Base Station)
  • 5mm Headset and 4-Pin Analog Audio Connection (Base Station)
  • Base Station Support 7-36V DC Wide Voltage Input
  • USB Firmware Upgrade
  • Industrial Metal Case, Stable and Reliable

APPLICATIONS

  • Filmmaking
  • Live Broadcasting
  • Corporate Events
  • Production Crew Communication
  • Stage Activities
  • Emergency Dispatch
  • Webcasting

PACKING LIST

1

 Base Station x1

2

 Beltpack x4

3

 Professional Dynamic Side-Ear Headset x5

4

 1.9G High-Gain Base Station Antenna x3

5

 Type-C Cable x4

6

 4-Pin XLR Adaptor x1

7

 Quick Guide x1

* The exact quantity may vary on products configuration. Please take the actual quantity as standard.

OPTIONAL ACCESSORIES: (Not included in the standard packing list)

Headset Professional Electret Side- Ear HeadsetSide- Ear Mobile Earphone Air Duct Earphone Earmuffs Professional Dynamic Double-Sided Headset
TALLY Cable TALLY Set (TALLY Switcher, Connector, External TALLY Light)
Antennas Dual polarization high-gain panel antenna Antenna Extender
Packing Hard Case Package
Installation Base Station Ear HangerBeltpack Cold Shoe
Charger 5- Port USB Beltpacks Charger (Can be configured to Chinese, US, UK, EU, and Australian standard)
Cascade Accessories 4-Wire to 2-Wire Converter Set Ethernet to XLR Cable 3.5mm to XLR Cable

STANDARD SETUP

The base station of this wireless full-duplex intercom system supports up to 4 belt packs. The base station and the belt packs support dynamic and electret mics. They could be switched by selecting different applications in the menu. The 4-pin audio interface on the base station enables the  device  to  connect  with  other  audio  systems,  which can increase the number of beltpacks and also the wireless communication range

PRODUCT INTERFACE

  1. 3.5mm EarphoneInterface: M G R LMic Impedance: 600Speaker Impedance: 32
  2. DC Power SupplyPower Supply Range: 7 36V DCPin 1: GNDPin 2: NULLPin 3: NULLPin 4: POWER
  3. Intercom 4-WireInput Impedance: 10K Pin 1: NULLPin 2: NULLPin 3: AUDIO OUT+Pin 4: AUDIO IN+Pin 5: AUDIO IN-Pin 6: AUDIO OUT-Pin 7: GNDPin 8: GND

A BASE STATION

B BELTPACK
  1. RF Antenna Interfaces
  2. DC Power Supply (4-Pin XLR Male)
  3. 4-Pin Audio Input / Output
  4. F970 Battery Plate
  5. 4 USB Type-A Interfaces (For Beltpacks Charging and Cable Connection)
  6. Type-C USB Debugging Interface
  7. Power Switch
  8. Up/Left Button
  9. Menu/Confirm Button (Long Press to Enter Menu/Click to Confirm)
  10. Down/Right Button
  11. Remote Beltpack Mic Mute Button
  12. 3.5mm Headset Interface
  13. Base Station Volume Control Knob
  1. Antennas Interfaces
  2. Power and Volume Control Knob
  3. 3.5mm  Headset  Interface
  4. Up/Left Button
  5. Menu/Confirm Button (Long Press to Enter Menu /CIick to Confirm)
  6. Down/Right Button
  7. Mute/Talk Switch Button (Double Click to Mute/Long Press to Talk)
  8. Type-C USB Interface (For beltpacks Charging and Cable Connection)
  9. 3-Segment 3.5mm TALLY Output Interface
  10. 1/4 Screw Hole

OLED DISPLAY

A BASE STATION

B belt pack
  1. Beltpack Signal Strength
  2. Beltpack Real-Time Battery Status (Actual percentage will be displayed when the battery is lower than 20%)
  3. Beltpack Current Status
  4. F970 Battery 1 Low Battery Indicator
  5. F970 Battery 2 Low Battery Indicator
  6. Beltpack Number
  1.  Beltpack Signal Strength
  2. Beltpack Real-Time Battery Status (Actual percentage will be displayed when the battery is lower than 20%)
  3. Battery Charging Indicator
  4. Beltpack Number
  5. Beltpack Current Status

BASE STATION MENU FUNCTION INTRODUCTION

Long press the Menu/Confirm/OK button for about three seconds to enter the root menu. select the folder and press “OK” to enter the next menu. Each menu feature is introduced as follows.

  1. Select “Mic Options” and press the “OK” button to enter the secondary menu of Mic Setting1.1. Select “Mic Type” and press ‘OK” to enter the third-level menu of Mic Setting;1.1.1. Select “Dynamic” and press “OK” to switch to dynamic mic mode;1.1.2. Select “Electret” and press “OK” to switch to electret mic mode:1.2. Select “Mic Gain’ and press ‘OK” to enter the third-level menu of Mic Gain Control;1.2.1. Increase the mic gain, the belt pack will hear more sound while decreasing the mic gain, the belt pack will hear less sound.
  2. Select “Application” and press “OK” to enter the secondary menu of the scene mode setting2.1. Select “Quiet” and press “OK” when in a quiet environment;2.2. Select “Noisy’ and press ‘OK” when in a noisy environment.
  3. Select “4 Wire Setting” and press “OK” to enter the secondary menu of 4 wire audio setting3.1. Select “Input Gain” and press “OK” to enter the third-level menu of input gain adjustment;3.1.1. Increase the gain, the 4 wire Input sound will increase accordingly, and vice versa;3.2. Select “Output Gain” and press “OK” to enter the third-level menu of output gain adjustment;3.2.1. Increase the gain, the 4 wire output sound will increase accordingly, and vice versa.
  4. Select “System” and press “OK” to enter the secondary menu of the system setting4.1. Select information’ and press “OK” to enter the third-level menu of Information inquiry;4.1.1. ‘MI° Type” displays the current mic type;4.1.2. *kilo Gain” displays the current mic gain;4.1.3. ‘Input Gain’ displays the current 4 wire input gain:4.1.4. “Output Gain” displays the current 4 wire output gain;4.1.5. °Version” displays the current firmware version number;4.2. Select “Reset” and press ‘OK”, the confirmation alert to restore to factory setting will pop up on the screen;4.2.1. Select ‘OK’ and press “OK” to delete all beltpacks registration information and the base station will be restored to the default setting.
  5. Select “Exit” and press “OK” to return to the root menu

BELTPACK MENU FUNCTION INTRODUCTION

Long press the ‘Or button for about three seconds to enter the root menu, select the menu, and press “OK” to enter the next level. Each menu feature Is described as follows.

  1. Select “Pair” and press the “OK” button to enter the secondary menu of the registration feature1.1. Connect the belt pack with the base station with a USB cable and select any ID from 1 to 4 then press “OK’ to register the belt pack. ‘Pairing…” will be displayed on the main interface of the belt pack and the base station. Unplug the USB cable after “Pairing Successful” is displayed on the screen of both of them.
  2. Select “Application” and press “OK” to enter the secondary menu of scene mode configuration2.1. Select “Quiet” and press “OK” when in a quiet environment;2.2. Select “Noisy and press “OK” when in a noisy environment.
  3. Select “Mic Type” and press the “OK” to enter the secondary menu of mic type selection3.1. Select “Dynamic’ and press ‘OK” to switch to the dynamic mic mode;3.2. Select “Electra!” and press “OK’ to switch to the electret mic mode.
  4. Select “Battery” and press “OK” to enter the secondary menu of the battery Information Interface4.1. “Percentage” displays the current power percentage;4.2. “Core” displays the current battery cell core version;4.3. “Version’ displays the current firmware version.
  5. Select “Information” and press the “OK” button to enter the secondary menu of system information inquiry5.1. “ASS!’ displays the current wireless signal strength;5.2. “Mic Type” displays the current mic typesetting;5.3. “Application” displays the current scene mode setting; 5.4. “Version’ displays the current firmware version.
  6. Select “Exit” and press “OK” to return to the root menu

INSTALLATION

  1. Base Station Installation1. Install antennas as demonstrated.2. Connect the power adapter and the headset.3. Press the power switch to power it on.
  2. Beltpack Installation1. Connect headset as demonstrated.2. Turn the power and volume control knob to turn on the belt pack.3. When the status of the belt pack turns from °LOST° to “MUTE”, long-press the “MUTE/TALK” button on the side of the belt pack to switch it to “TALK” mode to communicate. If the belt pack operator doesn’t want to talk with the base station, double click the “MUTE/TALK” button on the side of the belt pack to switch to “MUTE” mode. The beltpack operator can still hear the base station and other connected beltpacks under this model.4. Click the °REMOTE MIC KILL” button to mute all beltpacks if the base station operator doesn’t want to hear from all beltpacks. When the indicator light is on. all beltpacks are switched to “MUTE’ mode. Under this model. jetpacks operators can hear the base station but they cannot talk to each other and to the base station. If a belt pack operator wants to communicate with the base station, long-press the “MUTE/TALK” button on the side of the belt pack to call the base station. The “REMOTE MIC KILL” button on the base station will flash with a red light. Click the “REMOTE MIC KILL’ button again to enable all beltpacks to switch back to “TALK” mode.5. The default setting of the mic is the dynamic mic. Users can choose different types of mics based on different applications. Long press the menu button to enter the interface of the mic setting and change the mic type to electret.6. When connected with other intercom systems by 4 wire audio interfaces, users can enter the root menu and adjust Input/output gain to reach gain balance for the whole intercom system.7. Due to the noise differences in different applications, It may take some white noise to have a better hearing experience. The background noise level can be adjusted by changing the “Application” In the root menu.8. It is recommended that the users completely discharge the belt pack using the belt pack three times before. Since the battery has been in hibernation after a period of time.

  3. RepairingIf any beltpack ID is lost while using the system resulted from incorrect operation or other reasons, connect the base station and the belt pack through the standard USB type-0 data cable. Enter the pairing menu and selects a master station vacancy ID for registration on the belt pack. “Pairing…” will appear on the main interface of the base station and the belt pack. Wait until “Pairing Successful” is displayed on the screen of both the base station and the belt pack before unplugging the cable. The belt pack will then be ready to use again.

  4. TALLY FeaturesTALLY universal signal converter is an optional accessory available on the market. It can help the product achieve the TALLY distribution feature. Please find the detailed user guide in the TALLY Universal Signal Converter Quick Guide.

PARAMETERS

Base Station Beltpack
Interface 2Antenna Interfaces4-Pin XLR Male DC Input3.5mm Headset InterfaceRJ45 Interface 4 wire audio interface USB Type-C InterfaceDouble USB Type-A Interfaces 2Antenna Interfaces3.5mm Headset Interface3.5mm TALLY Output Interface USB Type-C Interface
Power Supply Mode 7∼36V DC: F970 Battery (Typical) 1600mAh Polymer Lithium Battery
Frequency Response 300Hz to 4KHz 300Hz to 4KHz
Signal to Noise Ratio > 50dB > 50dB
Distortion < 2% < 2%
Transmission Range 300m Between Beltpack and Base Station 300m Between Beltpack and Base Station
Frequency Bandwidth 1.9GHz 1.9GHz
Modulation Mode GFSK GFSK
Transmission Power Maximum 24dBm Maximum 24dBm
Receiver Sensitivity ≤-93dBm ≤-93dBm
Bandwidth 1.728MHz 1.728MHz
Power Consumption ,<4W <0.7W
Dimension (L*W*H): 220*170*50mm (L*W*H): 100*58*22mm
Net Weight 1400g 180g
Temperature Range 0 -4-40°C(working status)-20∼+60t(storage condition) 0 -440t(working status)-20∼+60t(storage condition)

FAQ 

SAFETY NOTEDo not place your beltpacks on heating equipment, cooking equipment, high-pressure containers (such as microwave ovens, induction cookers, electric ovens, heaters, pressure cookers, water heaters, gas stoves, etc.) to prevent the battery from overheating and exploding. The original mating type of charger, data cable, and battery must be used. Chargers, data cables, or batteries that are not certified by the manufacturer or not the companion model may cause electric shock, fire, explosion, or other hazards.POOR AUDIO QUALITY

  1. First, confirm whether the belt pack antennas are correctly installed and tightened. If there Is no Improvement, replace the antennas.
  2. Ensure that the belt pack and the base station are in the transmission range and there is no obstacle between the main station and the belt pack.
  3. Check if the volume of the belt pack is too low and turn it to a comfortable level.
  4. Due to the difference in Impedance and setting bias, we generally don’t recommend customers use their own 4-stage 3.5mm headset. If the sound quality is poor, replace the headset.

BASE STATION CANNOT DISPLAY BELT PACK INFORMATION

  1. First, confirm whether the belt pack antennas are correctly installed and tightened. If there Is no Improvement, replace the antennas.
  2. Check the status of the Beltpack. If °LOST’ appears on the belt pack screen, make sure that the beltpack is within the transmission range from the base station.
  3. Check the status of the belt pack. If it is displayed as “NULL”. it means that the belt pack information is lost due to incorrect operation, and it needs to be reregistered.

NO SOUND BETWEEN THE BASE STATION AND BELT PACK

  1. Confirm if the “REMOTE MIC KILL” button on the Base station is on. If the red light is on, click on it to turn it off.
  2. Check the current status on the belt pack screen. If it’s on “MUTE”, long-press the “MUTE/TALK” button on the side to switch it to “TALK”.
  3. Check if the headset functions well and if you wear the headset and mic properly. (correct way: put the headset on the head with the mic less than 10cm from your mouth)

TALLY FUNCTION UNAVAILABLE

  1. Confirm that the type of the switcher is correct. The TALLY interface definition is not unified on most switchers, so it will cause TALLY dysfunction;
  2. Due to various types of the switcher, the high-level value will work when pushing the level switch to “High” on the TALLY signal universal converter; the low-level value will work when pushing the level switch to “Low” on the TALLY signal universal converter;
  3. Confirm the ID of the beltpacks, and check if the TALLY converter connects with the USB Type-A interface on the base station correctly;
  4. The belt pack only supports external TALLY light. Confirm if the belt pack connects to an external TALLY correctly;
  5. DB25 INTERFACE AND TALLY INDICATOR WIRING RELATION TABLE

Channel

 Program Preview

GND
TALLY 1 PIN 1 PIN 14 PIN 13
TALLY 2 PIN 2 PIN 15
TALLY 3 PIN 3 PIN 16
TALLY 4 PIN 4 PIN 17
TALLY 5 PIN 5 PIN 18
TALLY 6 PIN 6 PIN 19
TALLY 7 PIN 7 PIN 20
TALLY 8 PIN 8 PIN 21

Ikan International11500 S. Sam Houston Pkwy West Houston, TX 77031TEL:+1.713.272.8822FAX:+1.713.995.4994SALESReseller and Consumer[email protected]MARKETINGSponsorship, Partnership, Brand Ambassadors, and Media[email protected]SUPPORTReturns, exchanges, and general support[email protected]

MADE IN CHINA

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,