Design and QualityIKEA of Sweden

SJÖMÄRKE

Screws are not included, as different materials require different screws. For advice on suitable screw systems, contact your local specialized dealer.

Charger features

• Wirelessly charges Qi-compatible devices.
• Compatible with Qi 1.2.4BPP specification
• Temperature and power monitor for safety.
• LED status indicator.

Instructions for use

• Connect the charger cable to the power adapter and plug it into the wall socket.
• For wireless charging, place the device to be charged on top of the plus sign (+) on the desk. The device must be placed directly over the plus sign (+) on the desk for the charging function to work optimally. Note that on some devices you may have to activate wireless charging in settings.
• If your battery is completely discharged, it may take a few minutes before it starts charging. This is entirely normal. You can see that thethe battery has begun charging when the battery symbol appears on your device.

LED indicator (see illustrations):

1. Power on: LED lights up for 3 seconds.
2. Charging: LED on.
3. Charging completed: LED off.
4. Error: LED flashes.

Good to know

• The distance between the device and charger should be a minimum of 8 mm, or the charger will not start charging.
• The charging function works with every material except metal.
• Devices may get warm during charging; this is completely normal and they will gradually cool down again after they are fully charged.
• Charging time may vary based on the device’s battery capacity, charge level, the age of the battery, and the temperature in the surrounding area.
• Charger storage temperature: -20°C to 25°C (-4°F to 77°F).
• Charger operating temperature: 0°C to 40°C (32˚F to 104˚F).
• Unplug the charger from the power source before cleaning and when it is not in use.
• To clean the charger, wipe with a moist cloth. Never submerge the charger in water. Recommended precautionary measures and technical data: See the back of the charger.

Save these instructions for future use.

WARNING:

• Only charge devices that are Qi-compatible.
• The wall socket must be located near the equipment and must be easily accessible.
• Only use in dry locations.
• Only use the included 24V adapter with the wireless charger unit. Other adapters could cause damage to the unit.
• Children should be supervised to ensure they do not play with the product.
• Do not subject the units to wet, moist, or excessively dusty environments since this can cause damage to the units.
• If the cord is damaged the product shall be destroyed.
• Do not install the product on a desk higher than 1.5m (5 ft).

Product servicingDo not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.

Technical data

Type: E2018 SJÖMÄRKEInput: 24.0V DC, 0.7A, 16.8WOperating frequency: 110 – 148 kHzOutput power: -2 dBuA/m at 10m

Power Supply UnitType: ICPSW24-19-1Input: 100-240 VAC, 50/60 Hz, 0.4AOutput: 24.0 V DCMax total load: 0.8 A, 19.0 W

report this ad

Indoor use onlyManufacturer: IKEA of Sweden ABAddress:Box 702, SE-343 81 Älmhult, SWEDEN

RF EXPOSURE INFORMATIONAccording to RF exposure regulations, under normal operations, the end-user shall refrain from being closer than 10 cm from the device.

This device complies with Part 15 of the FCC Rules.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation Science and Economic Development Canada’s license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation of the device.

WARNING:Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

© Inter IKEA Systems B.V. 2020AA-2281316-2