ILVE Outdoor Bluetooth Speaker with Removable Stake User Guide

Table of Contents

ILVE Outdoor Bluetooth Speaker with Removable Stake

Features

Waterproof
Bluetooth wireless 5.0: range 33 ft.
Party Plus Mode
360 degree sound
Built-in microphone
Solar Panel
Built-in rechargeable battery: approximately 20 hrs playtime at 50% volume
Micro-USB port for battery recharge

Overview

Using the StakesThe stakes allow you to stabilize these speakers on the ground for use outdoors.

Remove the stakes from the casing
Insert the stake into the bottom of the casing as shown below.
Insert the stake into the bottom of the speaker and stick the stake into the ground.

Controls

Mode: Press to change source modes to Bluetooth, Aux in, FM radio. Press and hold for 5 seconds to enter into Party Plus mode.
Microphone
Volume/Skip+/Prev- : Press to adjust volume level. Press and hold to previous / next track.
Charging/Bluetooth Indicator LED: Light will turn solid red when charging and will turn off when fully charged. Flashing red when low battery. Flashing blue when in Bluetooth mode. Solid Blue light when in Aux in mode.
: Press and hold to enter into pairing mode manually.
Power/Play/Pause: Press and hold to power ON or OFF. Press to play/pause audio. Press to answer phone calls.

Includes

3.5mm audio cable
Micro-USB to USB charging cable
Stakes

Battery Charging

To charge the internal battery, plug the USB charging cable into the DC Power Input on the speaker and a powered on computer or USB power adapter (not included) and standard power outlet. Charging time is approximately 3 hours. Battery life is approximately 20 hours at 50% volume.When the battery is low a voice will announce “Low Battery,” then the unit will automatically power OFF.While the unit is charging it will display a solid red light. When the battery is fully charged the light will turn off.

Aux In & Micro SD

Aux In

Requires a 3.5mm audio cable (included).

Connect a 3.5mm audio cable to the Aux In on the unit and the audio output on an audio device. The unit will automatically change to Aux in mode.
Use the controls on the connected device to select and play audio. Be sure the volume on your connected device is audible when you begin playing.

Micro SD

Load a Micro SD memory card into the Micro SD port.
The speaker will automatically switch to SD mode.
Use the controls on your device to select and play audio from the connected drive.

Party Plus Mode

If you have another ISBW240 speakers, you can pair and play the two speakers together for a surround sound effect, or have two speakers playing in different rooms.

To enter Party Plus Mode, Power ON both speakers and make sure both units are in Bluetooth mode.
Press and hold the Mode button on one of the units (this is now the primary unit), and the speakers will attempt to pair to each other.
When the two speakers are paired together a voice will announce the connection.
Connect Bluetooth device to speakers using the steps from the “Pairing and Playing Bluetooth Audio” section below.
Use your device to select and play tracks. The audio will now be heard through both speakers.
The primary unit will control both speakers when connected. To disconnect the speakers, press the Mode button on the primary unit.

Note: To use Party Plus Mode, please make sure that you connect the speakers before pairing to your Bluetooth device. You will not be able to connect the speakers if you are already paired to a Bluetooth device.If after you have connected the two speakers, you decide you want to use one of the speakers independently:

Press and hold the Mode button on the speaker you want to use to disconnect the two speakers.
Press and hold button on the speaker, the speaker will then enter into pairing mode. You can now connect to the speaker manually.

If you want to connect the speakers together again:

Access your device’s Bluetooth settings menu and select all ISBW240s.
Select “forget this device” and follow the Party Plus mode connection procedure listed in the user manual.

Pairing & Playing Bluetooth Audio

When first powered on, the speaker defaults to Bluetooth Mode and is ready to pair automatically. When pairing, remain within 3 feet of the Bluetooth device.
Using the controls on your Bluetooth device, select ISBW240 in the Bluetooth settings to pair. If need be, refer to the user’s manual for your specific device for more information.
When successfully paired, a voice prompt will announce the connection. Your Bluetooth device will now be heard through the speaker.
Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level.
After initial pairing, the speaker will automatically connect to the last Bluetooth device used whenever it is in Bluetooth Mode. Note: If your device should become unpaired or you find it is unable to connect, press and hold the button to enter to Pairing Mode. A voice will announce, “Bluetooth is connecting,” and you can connect to the speaker manually.

FM Radio

An FM receiver is built into the speaker but functions best when the included USB cable is connected to the speaker.

Once powered ON, press the Mode button to switch to FM Radio Mode.
Press and hold Power/Play/Pause button for 2 seconds to scan and save radio stations automatically.
Press and hold the +/- buttons to cycle through saved stations.

Customer Support

Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: [email protected]

For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com

FCC WarningsWARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. This product meets and complies with required Federal product guidelines.

report this ad

References

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-26

ILVE

admin

Tags:

bluetooth, ILVE, ISBW240, Outdoor, Removable Stake, speaker, v2687-02