imperii HandsFree Headset Instruction Manual
To charge the battery
The battery must be fully charged before using the device for the first time.
- Connect the charger cable to the headphone jack.
- Connect the charger to the wall socket.
- The red indicator light will light while charging, and will turn off when fully charged.
- Disconnect the charger from the headphones and the plug.
- Or attach the headphones to the charging cradle: the red light will light until fully charged.
- Remove the headphones from the charging cradle.
To charge the charging base
The battery must be fully charged before using the base for the first time.
- Connect the charger cable to the input of the charging cradle.
- Connect the charger to the wall socket.
- The red indicator light will turn on, and then turn off when the charge is complete.
- Disconnect the charger from the base and the plug.
- Always use the original standard charger.
To turn the headset on and off
- To switch on: press and hold the “answer/end” key for 3 seconds until the blue light flashes.
- To turn off: press and hold the same key for 6 seconds to turn off.
To pair the headset with the Bluetooth phone
- Turn the headphones on and leave them in stand-by mode.
- Look for your Bluetooth device from your mobile.
- When the handset finds the headphones, confirm by selecting them in the list.
- Enter the “0000” password when prompted.
- Repeat these steps if the link fails, you only need to link them once.
- If the pairing was successful, a blue light will start blinking, indicating that the headset is on standby and ready to make and receive calls.
To answer a call
- Push “answer” on the phone, or
- Press the “answer/end” key on the headset.
To end a call
- Hang from your mobile, or
- Press the “answer/end” key on the headset.
To Reject a call
- Reject the call from your mobile, or
- Press and hold the “answer/end” key on the headset for 1 second while the call rings.
To make a call
- Dial the number from your phone and dial it: the call will be automatically transferred to the headset.
To redial the last dialed number
a. Press the “answer/end” key twice with the headset in stand-by mode.
To turn on voice dialing
- Your phone must support this function. While in stand-by, press and hold the “answer/end” key for 3 seconds.
- Say the number you want to dial by following the instructions on your phone; Record your voice through the headphones for better and more accurate results.
To adjust the volume of the headphones
a. Press the volume up key on your phone to increase the volume.b. Press the volume down key on your phone to decrease the volume.
To store the headset
- Turn off the headphones
- Temperature range: 10 ° C/ 14 ° F-60 ° C/ 134 ° F
- Do not expose the headphones to rain or any other liquid.
imperii HandsFree Headset Instruction Manual – imperii HandsFree Headset Instruction Manual – imperii HandsFree Headset Instruction Manual –
[xyz-ips snippet=”download-snippet”]