imperii Power Outlet with 2 USB Instruction Manual

imperii Power Outlet with 2 USB

Notice:

1. The product need Professional electrician to install.
2. The Above picture only show the dimension of the stent is 86 MM, there are other size of stent and different types module for your choose. The way of install and remove are the same

Installation Instruction

This product should be installed by professional electrician

1. Unscrew the shell screw, take off the shell
2. Unscrew the null line, live line, ground wire three connection screw.
3. Connected corresponding line to the terminal.
4. Tighten the mounting screws.
5. Assemble the shell according picture, tighten screw.

NOTE

1. To ensure the correct use of this product, only professional electricians can install or remove.
2. When install or remove, must disconnect the main power supply.
3. Please according to the electrical installation procedures, correctselection of product rated current of the voltage, make the product can be used in rated working conditions.
4. Do not be used in short circuit or overload conditions, otherwise it will breakdown.
5. Do not be used in a serious damp environment.
6. To ensure safety, please read the instructions carefully before usage.

EU Socket

Product Size: 45*45*39 mmInstallation Size: 45,2*45,2mmFaceplate Material: PCWay of installation: Concealed installationCopper: QSnS.6-0.1 H62Specification:Rated Current: 16ARated Voltage: 220-2S0V 50/60HZMechanical Lifetime:> 5000Heat-Resistant: 100 /1 hInsulation Resistance: 25MDamp Resistance: 48>5MTemperature Raise: <45KEarthing Provision: <0.05MElectric Strength: 2000V-1 Min

TECHNICAL SERVICE : http://imperiielectronics.com/index.php?controller=contact

imperii Power Outlet with 2 USB Instruction Manual – imperii Power Outlet with 2 USB Instruction Manual – imperii Power Outlet with 2 USB Instruction Manual –