imperii RR FIERRO BP HR Smart Bracelet Instruction Manual

imperii RR FIERRO BP HR Smart Bracelet Instruction Manual

System Requirements

1. Android 4.4 +
2. iOS 8.0 +
3. Bluetooth 4.0

Preparation for use

Charge:

Check that the device has battery to power on its first use. In case the battery is low, connect it to the charger: the device will start automatically.Please connect the charger clip to the three-point contact on the back of the bracelet.

Connection

Please check that your mobile meets the above requirements and download the application to connect.

Download App:

Please look for the “Wear/it” App on the App Store or your Android market, or scan the corresponding lower QR code.iOSAndroid

Link:

Please make sure Bluetooth is activated and open “Wearfit”. Click “link to bracelet”. look for the device in the list and select it. It will then enter the main interface.

Start wearing the bracelet

Once the device has successfully connected to the App, it will synchronize the time, and record and analyze your activity data, heart rate, blood pressure and sleep quality.How to operate the bracelet: pressing the button, this is the order in which t he interfaces will change: Clock Mode-> Pedometer Mode-> Calories Mode -> Heart Rate Mode-> Blood Oxygen Mode-> Blood Pressure Mode -> Sleep Mode.

Instructions of the functions:

1. Clock mode: shows the ti me, date and battery status.
2.  Pedometer mode: automatically counts the steps given.
3.  Calories mode: count calories burned.
4.  Heart rate mode: The device will automatically measure your heart rate. You can also activate the measurement via the App. When the bracelet enters Heart Rate Mode, it begins to take measurement immediately. If you do not want to perform this test, please continue to change the interface without stopping at this one. The heart rate interface shows the data of the last test performed.
5. Blood oxygen mode: The device will automatically measure your oxygen level in blood. You can also activate this measurement through the App. When the bracelet enters Blood oxygen mode, it begins to take the measurement immediately. If you do not want to perform this test, please continue to change the interface without stopping.
6.  Blood pressure mode: The device will automatically measure your blood pressure. You can also activate the measurement through the App. When the bracelet enters Blood Pressure Mode, it begins to take measurement immediately. If you do not want to perform this test, please continue to change the interface without stopping.The blood pressure interface shows the data from the last test performed. (The measurement takes about 150 seconds. Too much distance between the sensor and the skin, sweat or dirt can alter the accuracy of the data obtained.)
7.  Sleep Mode: The sleep monitor automatically recognizes your condition and controls the complete progress of your sleep, analyzing the hours of deep sleep and light sleep.
8.  Call Alert: Activate the “Call reminder” function in the App, and the bracelet will vibrate when a call comes in on your mobile.
9.  Message alert (Android only): Abra la funcion “Message reminder” en la App y la pulsera vibrara cuando reciba mensajes de texto en su movil.

Frequently Asked Quest ions

1. I cannot find the bracelet when searching for the device to connect it.
   1. Make sure that Bluetooth is enabled and that your phone uses Android 4.4 or higher, or iOS 8.0 or higher.
   2. Make sure that the distance between the phone and the device is not more than O.Sm. Once they have connected via Bluetooth, the allowed distance will be the normal distance (10m).
   3. Make sure that the device does not lack battery. If the problem persists, please contact us.
2. I cannot connect the device to the AppSome Bluetooth services on smartphones have abnormal behavior after restarting them. Please restart the Bluetooth or the mobile to pair the devices.
3. App does not display dataThe data depends on t he synchronization and the manual measurements to be transferred. Please make sure the battery is charged and the Bluetooth enabled.
4. Incorrect timeIf the bracelet has low battery, the time may be incorrect. Please charge the bracelet and reconnect it with the phone again.

Specifications

• The company reserves the right to change the contents of these specifications without prior notice. Some of the features may vary depending on the software version, this is completely normal.

TECHNICAL SERVICE:

Visit: http://www.imperiielectronics.com/contactus

imperii RR FIERRO BP HR Smart Bracelet Instruction Manual – imperii RR FIERRO BP HR Smart Bracelet Instruction Manual – imperii RR FIERRO BP HR Smart Bracelet Instruction Manual –