imperii Whitey Wireless Headphones with Portable Charging Dock Instruction Manual

imperii Whitey Wireless Headphones with Portable Charging Dock

Specifications

Whitey wireless, real no wires design, individual left and right channel, HIFI sound, both the left and right earbud are Bluetooth enabled, could be used separately or used as only pair.

About pairing

1. Pairing with a earbud: long press the multifunction button for a few seconds until the LED flashes red and blue alternately, then turn on the Bluetooth of your device and select “i7tws” in your list, there will be a phrase that says “connected”. then You can enjoy music or make phone calls, supports incoming calls.
2. Pairing with both siders:a) long press the multifunction button on both sides, a few seconds until the LED flashes red and blue alternately;b) double click on either side to enter coupling mode, or press the button for 3 seconds, there will be a phrase that says “ready for coupling”;c) turn on the Bluetooth of your device and select “i7tws” to connect, when the led light slowly flashes blue, the coupling is correct. The status of the battery is displayed on your cellphone.

NOTE: answering or making calls will only work one of the headphones, but both parties can control the function on/ play/ pause individually when they are connected, the other will be synchronized. The memory function supports the devices if they are connected.

Bluetooth usage

1. Making phone calls:Make sure the headset is connected to your phone, and you can make calls. When making a call, only one of the headphones works, and in case of an incoming call, the numbers will be displayed. Answer the call by lightly pressing the power button once, and reject it by pressing it twice. When the headphones are in music mode, dial the last number by quickly pressing the button on 2 times (highlight latest number).
2. Listening so music:Be sure the earphones are connected to your phone, and you can listen to music from your playlist. Gently press the power button to stop the music and play again by pressing again.
3. Power off:Long press the power button until the led is red, when not in use, the Bluetooth is also disconnected. It will turn off automatically when the headset is away from your device for more than 5 minutes. It will not be necessary to worry about battery consumption.
4. Charging:There is a reminder sound when the charge level is low, and the led will flash red at the same time. During charging, the led will be red, and turn blue when it is complete.Note: charging will force the earphone to be turned off even if they are turned on before charging.
5. Change the language:The earbuds enter the coupling mode when the red and blue LEDs alternate, then press the multi-function button to change the mode from Chinese to English (voice will report “English mode”).

Warnings

1. Please do not overuse the earphones or subject it to high pressure, keep away from water and heat.
2. Keep it away from WIFI, router or other high-frequency transmission equipment to avoid interruption of signal reception.
3. Please use this earphone in its operating range (10 meters), the effect will be better if there are no obstacles between the connected devices.
4. Use this Bluetooth headset to connect any device with the Bluetooth function.

Summary

1. Dust -proof mesh
2. Multi – function button
3. Mic
4. Charging port
5. Charging Box Light
6. Android Charging port

TECHNICAL SERVICE: http:/lwww.imperiielectronics.com/contactenos

imperii Whitey Wireless Headphones with Portable Charging Dock Instruction Manual – imperii Whitey Wireless Headphones with Portable Charging Dock Instruction Manual – imperii Whitey Wireless Headphones with Portable Charging Dock Instruction Manual –