imperii Wireless Headphones with Charging Base and Wolf LCD Display
Product Diagram
- Microphone port
- LED indicator
- Multi-function button
- Load contact
- Loading ports
- LCD charging
- USB charging port
- Package includes:
- Bluetooth headset
- Cargo box for longer life
- Micro Spin charging cable
- User manual
- Silicone headphone cap
Product specifications
- Product Number: E6S
- Bluetooth version: Bluetooth V5.0
- Battery specifications: Earphone 3.7V / 45mAh; 3.7V / 280mAh charging box
- Supported modes: HFP / HSP / A2DP / AVRCP , Sensitivity: 105dB +/-3dB S.P.L. at 1KHz
- Transmission distance: 10 meters in an environment ideal without obstacles
- Duration in reproduction: around 3 hours.
- Duration in call: around 3 hours.
- Duration at rest: around 80 hours.
- Charging time: the cargo compartment compartment charging takes around 1.5 hours; and the burden of headset about 1 hour.
- Recharges of the case for the headphones: about 2.5 times.
Instructions for use
- StartRemove the headphones from their compartment and they will turn on automatically Or press and hold the multifunction button on the right headset and left for 3 seconds.
- offLeave the headphones in the charging compartment and they will turn off automatically. Or press and hold the multifunction button on the right and left headphones for 5 seconds to turn them off.
- Re-connectionWhen the pairing has been correct, the Bluetooth headset enters preferably in a connected state the next time it is turned on, and automatically reconnects with the linked mobile phone.
- Play/ PauseIn idle status, press the multifunction button on the right and left headphones to play music directly. When the music plays, you can pause it by pressing again.
- Change songsWhen the music plays, holding down the left handset button for 2 seconds will sound a “di” to switch to the previous song. The same process on the other handset will change to the next song.
- Volume up and downPress the left handset button twice to increase the volume step by step, and press it twice on the right handset to gradually reduce the volume.
- Answer callWhen calls enter your phone, press the left and right handset button to answer.
- Hang upIn the middle of the conversation, by pressing the left and right buttons of the headphones you can hang up.
- Reject callWhen you enter a call, holding down the left and right headset buttons for 2 seconds you can reject it.
- RedialIn idle status, or playing music, you can dial the number of the last call in your history by pressing the left handset button.
- Start voice assistantPress the right handset button 3 times to start Apple Siri or Google Voice Assistant, to control your mobile by voice.
- Low battery warningWhen the battery is low, a low battery warning tone will sound every 30 seconds until you turn off the headphones.
Pairing method
- Remove the headphones from the compartment and press and hold the multifunction buttons on both headphones for 3 seconds to turn them on, until the blue and red lights flash alternately, and you will enter pairing mode between headphones. This pairing is automatic, the red and blue lights will flash alternately, and in the secondary handset the flashing will be slow, indicating a correct pairing.
- Open the Bluetooth function of your phone or other device. If It Is an Android mobile, please click on “Search for Bluetooth devices”. If it is an iOS system, it will automatically search for devices. When you find the Bluetooth headset, click to pair. When pairing is complete, the main (right) headset will issue a successful connection warning, and both headphones will flash slowly in blue, and enter standby mode. After pairing successfully, the main headset is the right channel, while the secondary one is the left channel.
- The two headphones can be paired with the phone separately. The method is as explained in step 2.
Headphone charging
- Plug the MicroUSB charging cable into the USB charging port of your adapter, and connect the other end to the charger case. The LCD will show how much charge is left.
- Charge the headset; put each headset inside the charger case and it will automatically start charging. The headset indicator lights red when charging, and turns off when charging is complete. The LCD of the charger case will show the battery status. When the headset is fully charged, the LCD will turn off.
Precautions
- Please charge the device in a safe environment. When you need to charge the charger case, please disconnect it from the charging cable immediately after charging is complete. If left connected, the charger case may be damaged.
- When playing music, please adjust the volume to an appropriate level to avoid damaging your ears due to high volume over long periods of time.
- Avoid using the headphones In environments with Interference, as they may affect the signal from the headset.
- Avoid using these headphones in corrosive environments that may affect operation.
Tips: When you use these Bluetooth headphones to listen to music or talk, please pay attention and adjust the volume properly, so you will avoid hearing damage from excessively loud volume!
TECHNICAL SERVICE: http:/lwww.imperiielectronics.com/contactenos
imperii Wireless Headphones with Charging Base and Wolf LCD Display User Manual – imperii Wireless Headphones with Charging Base and Wolf LCD Display User Manual – imperii Wireless Headphones with Charging Base and Wolf LCD Display User Manual –
[xyz-ips snippet=”download-snippet”]