imperii Wireless Headphones with Flaty Charging Base User Manual

imperii Wireless Headphones with Flaty Charging Base

Wireless headset twins with charging box. Easy to use and connect with each other as well as connecting to your device. The headset offers good comfort no need to have any cables anymore while connected to your device.

Device Information

Wireless Version Dual-mode Bluetooth v5.0+EDR with ultra power and low battery usage
Wireless profile AZDP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3
Frequency 2.4GHZ
Distance Up to 10 meters
Battery capacity 45mah rechargeable II-Ion battery – Single earphone400mah rechargeable li-ion battery- Charging case
Standby Up to 100 hours single earphoneUp to 60 hours twin earphone
Continue usage Single earphone: Up to 4-5 hours

Dual earphone: Up to 3-4hours

Bluetooth Pairing

Step 1: Open the upper cover of the charging case and take out the headset, Light flashes red and blue, the earphone turned on.Step 2: After 1s, you will hear ‘di’, and light flashes only blue on both earphones. now the headset automatic paired each other.Step 3: Open your smartphone or other Bluetooth device, and searching the Bluetooth name on Bluetooth menu. Once it’s connected, the light will be off.Step 4: Listen to music and enjoy

(Note: If the TWS cannot connect each other, It need turn off the earphone first {put it back to the charging box or long press until it turn off), then turn on and double click the right side of multi-function button, when the blue light flashing slowly on both earphone, that means TWS connect successfully.

Using A Single Headset

Step 1: Open the upper cover of the charging case and take out any one of the headset, the headset will automatic turn on.Step 2: Now the headset will flash red / blue, Sim ply open up the Bluetooth menu In your device and search for TWS. As soon as It appears click on It and the headsets will be paired with your device automatically.

Automatic pairing

After the headsets are paired once with your device they will be automaticallypaired next time and this thanks to the Bluetooth chip available in the headset.

In other words you do not need to search for your headsets the next time you wish to pair them with your device the headsets are paired with your phone or Bluetooth device automatically.

Battery Indicator

Shows the battery level remaining when the headphones are paired with your smart phone.

Multi-function Button Control (Main Button)

  1. Receiving or hang up call: Click 2 times on L/R earphone.
  2. Reject call: Long press 2 seconds on L/R earphone.
  3. Siri function: Long press 2 seconds on L/R earphone.
  4. Last song: Click 3 times on Left earphone.
  5. Next song: Click 3 times on on Right earphone.
  6. Pause/start music: Click 2 times on L/R earphone.

Charging:When you plug both headsets Into the supplied charging box, It lights up first red when charging and turn to blue when the headsets are fully charged. The headsets are magnetic as well as the charging box connector for long lasting usage. Meaning when plugged in the charging box the headsets will not fall out easily out of the charging box.

About the charging box:the charging box flashing red when it charging. Once full charged the light will be red and stop flashing

Please note:

  1. Use this product with care do not expose the product to for ce, hard pressure or heavy objects on the product. Keep the product out of reach of high temperatures as well as humidity and moisture.
  2. For best performance avoid near contact with WIFI or Routers the Bluetooth signal can be affected and/or disconnect.
  3. Use the product within reach of the device with which the product Is paired.
  4. This product can be paired with devices that support Bluetooth.
  5. The warranty is not covered in case of damage caused by negligence or used product in contact with water or moisture.

Warnings:

  1. Please do not overuse this earphone or put It under heavy pressure, keep away from wet and heat.
  2. Keep away from WIFI, router or other high frequency transmitting equipment to prevent interruption of signal receiving.
  3. Please use this earphone under Its working range(10meters), and the effect would be better if there is no obstacle between the connected devices.
  4. Using this Bluetooth earphone to connected any device with Bluetooth function.

 

TECHNICAL SERVICE : http://imperiielectronics.com/index.php?controller=contact

imperii Wireless Headphones with Flaty Charging Base User Manual – imperii Wireless Headphones with Flaty Charging Base User Manual – imperii Wireless Headphones with Flaty Charging Base User Manual –

[xyz-ips snippet=”download-snippet”]