imperii Wireless Headphones with Load Base Butterfly
QUICK CONNECTION GUIDE
Take out the left and right (UR) earphones from the charging compartment, the ears will automatically turn on and connect, and the main headset (R) will enter the pairing state (the red and green light flashes alternately ), open the mobile phone Bluetooth search, click the main ear pair name to connect
PARAMETER CONFIGURATION
- True wireless stereo, left and right channel separation, HIFI sound.
- Both the left and right ears have a full Bluetooth headset function, which can be used alone or in pairs.
- Dual Mode Bluetooth 5.0, ultra low power consumption.
- Bluetooth transmission distance: 10 meters.
- Listening to the song time: about 4 hours.
- Call time: about 4 hours.
- Standby time: about 300 hours.
- Charge box charging: about 3 times.
- Charging time: 1 hour.
- Charging box charging time: 1 hour.
- Battery capacity: 3.7V 50mAh.
- Charge box battery capacity: 400mAh.
- Headphone charging parameters: 5V 40mAh.
- Built-in CVC6.0 noise cancellation technology.
- Support protocol family:
- A2DP1 .3/HFP1 .6/HSP1 .2/AVRCP1 .6/Dl1.
BLUETOOTH PAIRING
At the same time press and hold the two main headphones for 4 seconds to switch to the pairing state (the red and green light flashes alternately ), wait for about 5-10 seconds for the headset to be successfully paired. After the pairing is successful, the main headset (R) will automatically re-enter the pairing mode, and the traffic lights will flash alternately. Open your phone’s Bluetooth search and click on the headset pairing name to pair it.
BLUETOOTH USE
- Answer the call: When there is an incoming call, click the main button to answer the call.
- End the call: During the call, click the main button to hang up and end the call.
- Reject the call: When there is an incoming call, press and hold the main button for 1 second to reject the call.
- Mobile phone and headset audio switching: While in the call state, press and hold the main button for 1 second to switch back and forth between the handset and the earpiece.
- Music playback: When the headset is connected to the mobile phone, click the main button to play the mobile music;
- Music pause: When playing music, click the main button to pause playback.
- Music up and down: Double click on the previous song in the left ear (L) and double click on the next song in the right ear(R).
- Chinese/English language switching: When the headset is turned on to the pairing state (the traffic lights flash alternately), double-click the main button to complete the language switching.
- The headset is used separately: press and hold the main button for about 5 seconds to enter the pairing mode, the traffic lights flash alternately, the phone turns on the Bluetooth search, click the headset pair name to connect.
CHARGING BOX USE
Function 1: Charging
- When the power of the headset is low, the headset will be charged into the charging box and closed. The white light of the charging box will flash, and the red indicator light of the headset will be on, indicating that the charging box is charging the earphone.After the battery is full y charged, the indicator light is off. After a while, the light is off. The charging box indicator will also go out to sleep. (Note: When the charging box is charging the earphone or the external USB is charging the charging box, the charging box indicator will flash slowly. The battery level in the box can be judged according to the number of times the indicator flashes. Within 25%, the power is continuously flashed twice, the power is 25%-50%, and the power is continuously flashed three times for 50%-75%. The battery is continuously flashed four times for the power sufficient state, and the charging indicator battery Is fully illuminated.
- When the charging box is low, put it into the earphone, the charging box indicator will flash slowly, and the charging box should be charged at this time.
Function 2: Storing headphones.
When not in use, the headset can be recharged into the charging box, and it needs to be taken out when it is used. The headset will automatically turn on and connect back to the mobile phone. At this time, the headset can be used normally.
Note: When the power of the headset is completely discharged, the charging box can charge the pair of headphones 2-3 times at the same time. If the earphone is not used for a long time, please charge the charging box before use. The charging box will store the earphone for a long time. The battery inside the box will have a slow self-consumption and may be low.
PROMPT
- Please read the instruction manual carefully before using the product and keep it in a safe place.
- For the first time, please fully charge this product first.
- If the product is not used for a long time (more than 3 months}, please charge it.
- Must choose the national CCC certified charger produced by regular manufacturers
- When the power of the headset is completely discharged, the charging box can charge 2-3 times of each pair of headphones at the same time. If the earphone is not used for a long time, p ease charge the charging box and the earphone before use. The charging box will store the earphone for a long time. The battery inside the box will have a slow self-consumption and may have insufficient power.
WARNING
- Do not hit or squeeze the product.
- Do not let the device get wet with the liquid.
- Do not place the device In an environment where the temperature is too low or too high (below o • C or above 45° C).
- Do not use the device during thunderstorms.Thunderstorms can cause the device to ma function and increase the risk of electric shock.
- Please avoid using the device indicator near the eyes of children or animals.
- Please stay away from WIFI routers and other Bluetooth devices to avoid interference with other products using 2,4GHZ signals.
- Please use this product within the effective distance (1 Unobstructed)
- This product is suitable for all mobile phones, laptops, tablets and desktop computers with Bluetooth devices.
- Do not charge the charging box with fast charging or flash charging. Please use the charger with rated voltage of 5-5.5V or computer USB charging (when the voltage is higher than 6.SV, the charging box will enter the automatic protection mode. Truncate high voltage input to prevent damage to internal components)
TECHNICAL SERVICE: http:/lwww.imperiielectronics.com/contactenos
imperii Wireless Headphones with Load Base Butterfly User Manual – imperii Wireless Headphones with Load Base Butterfly User Manual – imperii Wireless Headphones with Load Base Butterfly User Manual –
[xyz-ips snippet=”download-snippet”]