In Common With Arundel Table Lamp
Arundel Table Lamp
How to Install Your New Light
Please check that you received all of the components pictured in this guide. Reach out to us if anything is missing. It’s very rare, but it happens. Don’t forget to turn off the electrical power source.
You won’t need any additional tools.
CAUTIONAs a safety feature, this lamp has a polarized plug to reduce the risk of electric shock. This means it has two flat prongs and a third circular prong underneath, and it will fit in an outlet one way only. If the plug does not fit fully and easily into the outlet, do not force it; contact a qualified electrician.
Contents
Part AStandard Lamp Base |
|
Part BType A Cap |
Part CArundel Shade – Type B |
Part DStem – 1 In |
Part EE12 LED Bulb (2x) |
Assembly
Step 1: Attach the stem (D) to the lamp base (A). Use your fingers to gently rotate the stem clockwise until it’s fixed in place.
Step 2: Using your fingers, screw in the two included lightbulbs (E) into the fixture sockets on opposite sides of the lamp base.
Step 3: Attach the shade (C) to the lamp base (A) by aligning the hole in the shade with the stem (D). Place the cap (B) on top of the stem and rotate clockwise until fixed. The shade should be snugly held in place.No wobbling.
Step 4: Plug-in the table lamp and turn on the light.
References
[xyz-ips snippet=”download-snippet”]