Dome Table Lamp
How to Install Your New LightPlease check that you received all of the components pictured in this guide. Reach out to us if anything is missing. It’s very rare, but it happens. Don’t forget to turn off the electrical power source.You won’t need any additional tools.
CAUTIONAs a safety feature, this lamp has a polarized plug to reduce the risk of electric shock. This means it has two flat prongs and a third circular prong underneath, and it will fit in an outlet one way only. If the plug does not fit fully and easily into the outlet, do not force it; contact a qualified electrician.ATTENTIONPar mesure de sécurité, cette lampe a une fiche polarisée pour réduire le risque de choc électrique. Cela signifie qu’il a deux broches plates et une troisième broche circulaire en dessous, et qu’il ne s’insère dans une prise que dans un seul sens. Si la fiche ne s’insère pas complètement et facilement dans la prise, ne la forcez pas; contactez un électricien qualifié.
Contents
Dome Table Lamp
| Step 1: Attach the stem (D) to the lamp base (A). Rotate the stem clockwise until it’s fixed in place.
|
Step 2: Screw in the two included lightbulbs (B) into the fixture sockets.
|
Step 3: Attach the shade (C) to the lamp base. Align the hole in the shade (C) with the stem (D). Insert the cap (E) on top of the stem and rotate clockwise until fixed. The shade should be snugly held in place.No wobbling. |
Step 4: Plug in the table lamp and turn on the light.
|
Assembly Guide
References
[xyz-ips snippet=”download-snippet”]