innotech IB-655 Body Composition Smart Scale Instructions
Product Specifications
- Model: Innotech IB-655 Bluetooth Smart Scale
- Dimensions: 320 x 320 x 25mm
- Net weight: 4.4lb (2kg)
- Power: DC 6V
- Storage temperature: -13—158°F / 25—70℃
- Working current: ≦60mA
- Batteries: AAA battery X 3
- Automatic shut-off: 30+/-3 seconds
- Bluetooth: BLE 4.0
LED Screen Display
OPERATING INSTRUCTIONS
- Scan QR Code, or Download the “Innotech Scale” application from Play Store (Android) or App Store (IOS).
- Register through the Innotech app following application prompts to completion.
- Install the batteries and place the scale on a hard flat surface. Insert three new AAA batteries, making sure the plus and minus(+/-) poles are aligned properly according to the diagram inside the compartment. Place the scale on a hard flat surface (not carpet) to ensure the greatest accuracy and reliability.
- Follow the instructions in the app to pair the scale with your phone.
- After paring, step on the scale barefoot, and start weighing.
- Step onto the measurement platform.Step on and off the scale to activate it. Stand with your weight evenly distributed on the measurement platform and remain still until the measurement is complete.
CHANGE MEASUREMENT
When the screen illuminates, open the battery compartment located on the back of the scale, press the button inside to switch unit between pounds and kilograms.
TROUBLESHOOTING
Solution for unsuccessful activation or connection
- Do not pair the scale from your Smartphone’s Bluetooth menu. Use the Innotech application to pair the scale with your Smartphone.
- Make sure the batteries are correctly installed. Replace the batteries if necessary.
- Fully exit your mobile application and reopen it.
- Disconnect Bluetooth and reconnect again.
MEASUREMENT RANGE
- Age: 18—80 years old (*Only weight will be measured for users under age of 18)
- Family member capacity: 10
- Weight: 5.5—397 LBS / 2.5—180 KG
- Weight increment: 0.2 LBS / 0.1 KG
- Height: 3 ft 2 in—7 ft 2 in / 100—220 cm
- Body fat: 5.0%—45.0%
- Body fat increment: 0.1%
- Water: 35.0%—75.0%
- Water increment: 0.1%
- Muscle: 46—298 LBS / 21.0—135.0 KG
- Muscle measurement increment: 0.2 LBS / 0.1 KG
- BMR: 700—3000 KCAL
- Visceral Fat: 1—59
- Bone mass: 2.2—8.8 LBS / 1—4 KG
- Bone increment: 0.2 LBS / 0.1 KG
- Protein: 5.0%—29.0%
- BMI: 5—90.0
GENERAL ADVICE
- Do not step on the scale when the surface or your feet are wet to avoid slipping.
- Protect the scale from hard knocks, moisture, dust, chemicals, drastic changes in temperature, electromagnet fields and sources of heat that are too close.
- Never step on the edge of the scale, it could cause the scale to tip.
- Remove the batteries if the scale is not being used for a long time.
- Do not jump on the scale.
SAFETY PRECAUTION
Innotech uses Bioelectric Impedance Analysis to measure body fat, which sends an extremely low electrical current through the body when taking a measurement. This low electrical current is unnoticeable and is safe for individuals.
- We do not recommend that anyone with a pacemaker, electrocardiographs and/or other medical devices implanted in the body or used for life support use the Innotech because of this electrical current.
- We advise any pregnant women to consult their physician before using the Innotech – not because any harm is likely to occur, but simply because each person’s body is unique, and it is worth asking a doctor about your specific situation before making such decisions.
- Athletes and fitness enthusiasts: Athletes have different body types. Scales using only foot electrodes sensors are known to overestimate it in leaner people.
- Under 18 years old: Only weight is available for young people under 18, because they are growing too fast and their body data is changing too frequently.
CLEANING,MAINTENANCE,AND DISPOSAL
Cleaning
You can clean your scale using a lint-free cloth dampened with water. If water is not enough to clean it, you can also use a mild dish washing soap.
Changing the batteries
Open the battery cover, remove the old batteries and replace it with new batteries.
Disposal
Dispose of this device in accordance with your local regulations. Batteries should be disposed of separately from household waste.
report this ad
FAQs
- My phone will not connect to the scale. What’s wrong?Please do NOT pair the scale from your Smartphone’s Bluetooth menu. Install and open the Innotech app and then follow the on-screen instructions to pair the scale with your smartphone.Click the “Pair Device” button on the top right of the app if you have another scale to pair. The “Pair Device” button only pop up if the app detects another Innotech Bluetooth Smart Scale.
- Why doesn’t the scale connect to my phone? It worked before. Please try to unpair and pair the scale again.
- The scale will not turn on, and the LCD display does not show anything. What should I do? Please check if the batteries are installed correctly or change new batteries.
- Why does my scale show incorrect weight? My scale is showing a difference between 4-5 pounds from my recent/current weight. Please stand still. The scale might need to be re-calibrated to show accurate readings. To do this, please put the scale on a hard, flat surface like tiles. Step on and off the scale quickly, the scale will show 0.0 lbs. This indicates calibration is complete.
- Why am I receiving variant measurements? Please wipe your feet with a damp cloth, keeping them slightly wet and try it again.
- Why does the Innotech app/scale display my body weight only but not the other body metrics? Bluetooth connection is necessary to capture and record all data. Please install the Innotech App and log in, open the app, pair the scale, and step on the scale with bare feet. The app should show all the data. This could be happening for other reasons. Please try below troubleshooting solutions too: a. Clean the scale surface and feet. The scale surface is not clean or the user’s feet are too dry to be measured. Please clean the scale surface or wet your feet with a damp towel and try again. b. Check the age settings. The app will only measure and track users age 18 and above. Teenagers under 18 are growing fast ,and their body data is frequently changing, only weight can be measured and tracked. c. Make sure there is direct contact between the scale surface and the user’s feet. Please do not wear socks or shoes, and remember to remove the plastic film from the scale surface. d. Don’t step off too soon. The weighing process is not finished until the progress bar on the display screen completes from left to right.
- Why is my body composition data different from the ones I see at the gym, doctor, etc.? You may go to “Me” – “Edit” and check if your personal information set up in the app is correct. i.e., Gender and Body Type (Normal/ Athlete).Also, the numbers you see on your scale may vary from those you see using other measurement methods and professional medical instruments. This is normal. Innotech is a home use scale for reference.Innotech scale uses BIA (bioelectric impedance analysis), which is a commonly used method for estimating body composition, and in particular body fat. The bioelectrical impedance analysis (BIA) method is a lower-cost (from less than one to several hundred US dollars) but less accurate way to estimate body fat percentage.
- Why do the %fat, %muscle, and %water comprise 122% of my total body weight? It is normal for the three index to add up to more than 100% since water is contained in the fat and muscle.
- Does the app sync with Apple Health, Fitbit and Google Fit?Yes, Innotech app syncs with Apple Health, Fitbit and Google Fit. Please turn on Connect to apple health/Google fit/ Fitbit from Me—User settings. For iPhone, Fitbit will sync latest data only if you fully exit Fitbit (double click home button and swipe with a finger up) then reopen Fitbit.
- How many users can share this scale? How does it register the weight of different family members? Will other family members be able to see how much I weigh?The scale supports up to 10 user profiles. Each user can use their own smart-phone or share one app and create profiles in Family Management. If they only have their individual profile in the app, the scale will only sync their data to their individual device. Other member users will not have access to your data unless you permit them to add your profile to their app. Users can use their personal smart-phone and app/account to maintain privacy.
- Are the batteries rechargeable? What size are they? How long do the batteries last? The scale includes Three AAA batteries that are not rechargeable and usually last three to six months. However, rechargeable batteries also work for Innotech scales.
- Is this scale waterproof?The waterproof level is IPX-3, which is protected against water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for five minutes
Read More About This Manual & Download PDF:
References
[xyz-ips snippet=”download-snippet”]