Innr Lighting Smart Lighting Instruction Manual
© Innr Lighting B.V. 2018www.innr.com
To connect the lamp to the bridge, follow the instructions in the mobile app.
Factory-reset: switch the lamp OFF and ON six times (6x) with intervals of 0,5 seconds. The lamp will blink to indicate it is factory-reset. It can then be connected to a bridge again.
Important safety instructions
- For indoor use only.
- Do not disassemble the product; if any part is damaged, the product should not be used.
- Do not immerse in water.
- For cleaning, use a damp cloth, never a strong cleaning agent.
- Keep these instructions for future use.
Declaration of ConformityHereby, Innr Lighting BV declares that the radio equipment types RB 26x, BY 26x, RB 27x T, BY 27x T, RB 28x C, BY 28x C, RB 24x, RB 24x T, RS 22x, RS 22x T, RS 23x C are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.innrlighting.com/en/downloads
Frequency: 2.4 GHz (2400 ~ 2483.5MHz) – RF power: max. 10 dBm
References
[xyz-ips snippet=”download-snippet”]