ION Sport XL iPA130 User Guide

Sport XL[iPA130]Quickstart Guide

Support

For the full User Guide and the latest information about this product, visit ionaudio.com.For additional product support, visit ionaudio.com/support.For complete warranty information: visit ionaudio.com/warranty.

Technical Specifications

Water Resistance Class: IPX5Output Power: 120 W (peak)Frequency Response: 30 Hz – 20 kHz (±3 dB)Drivers: Low-Frequency: 8” / 203 mm woofer;High-Frequency: 3” / 76 mm tweeterMicrophone Type: Dynamic microphoneRadio Frequency Range (US): 87.5–107.9 MHz (FM); 520–1710 kHz (AM)USB Charging Ports: 5 V, 1 A (each)Battery: 12 V, 7 Ah, SLAPower: IEC320 C7 Power CableInput Voltage: 100–240 VAC, 50/60 HzDimensions (WxDxH): 14.6” x 9.9” x 17.7” / 370 x 252 x 450 mmWeight: 22.3 lbs. / 10.1 kg

Specifications are subject to change without notice.

Trademarks and Licenses

ION Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.App Store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play is a registered trademark of Google Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. All other product names, company names, trademarks, or trade names are those of their respective owners.

Sport XL Quickstart Guide

Box Contents

Sport XLPower Cable (IEC320 C7, 6 ft. / 183 cm)Microphone with Cable (8 ft. / 250 cm)Quickstart Guide

Features

A. Power Button: Press and hold this button to turn Sport XL on or off. Fully charge the battery before using.B. Bluetooth® Button: Press the Bluetooth button to pair to a Bluetooth device or disconnect a paired Bluetooth device. See below to learn more.C. Link: Press and hold this button to start stereo linking to another compatible speaker. Then, repeat this process on another compatible speaker (see ionaudio.com for a list of compatible speakers). Once the link has been established, LINK should appear on the Display. Select which unit will be the primary speaker by pressing its Bluetooth button. Use this speaker for pairing with a Bluetooth device or selecting a radio station. The primary speaker will play left channel audio, and the secondary speaker will play right channel audio. To disconnect the link between the two speakers, double-press the Link button.D. Radio Selector: Press this button set the radio to FM or AM, or turn the radio off.E. Presets: In Radio Mode, press these buttons to select a previously saved preset station. To save the current station as a preset, press and hold these buttons.F. Bass Boost: Press this button to enhance the overall bass frequency response.G. Tune/Track Buttons: Press these buttons to tune in to a radio station or go to the previous/ next track on a Bluetooth-connected device. To “seek” (jump to the next available radio station), hold either button down for a few seconds.H. Play/Pause: Press to play or pause a track from a connected Bluetooth device.I. Display: This screen shows information relevant to Sport XL’s current operation. See the full User Guide to learn more.J. Volume Control: Press this control knob to toggle between controlling the music volume and controlling the microphone volume. Turn the knob to increase or decrease the volume.K. Auxiliary Input (top-left, not shown): This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3 player, or another audio source.L. Microphone Input (top-left, not shown): Connect a microphone to this 1/4” (6.35 mm) mono input.M. USB Charging Ports (top-right, not shown): Connect your device’s charge cable here to charge it. USB charging-only functions when the unit’s power is turned on.

Pairing with a Bluetooth Device
  1.  Make sure the speaker is within range of your Bluetooth device (no more than 100 ft. / 30.5 m away).
  2. Press the Bluetooth button on the speaker.
  3. Navigate to your Bluetooth device’s setup screen. Then find and select Sport XL. If your Bluetooth device prompts for a pairing code, enter 0000.

Note: Do not connect to Sport XL_BLE; this is reserved exclusively for connecting to the ION Sound XP™ app. If you have previouslyconnected to your Bluetooth device, Sport XL will reconnect automatically.Tip: Double-press the Bluetooth button to enable or disable the Bluetooth pairing voice prompts.To disconnect a paired Bluetooth device, press the Bluetooth button.

App Control

IMPORTANT: To ensure the best possible experience with the app, use the most current Android OS or iOS on your device.Note: Ensure that your device has internet access via your service provider or wireless connection. You can also download the app on your computer, but remember to connect and sync your device to transfer the app.Follow these steps to download the free app on your device:

  1. Open the Apple App Store or Google Play on your device. Then, search for the ION Sound XP™ app.
  2. Follow the on-screen instructions to download and install the app. Once downloaded, the ION Sound XP™ app will appear on your device’s home screen.
  3. To use the app, you must first connect your device to Sport XL via Bluetooth. See the directions above to learn how to do this.For complete instructions on using the app, download the complete User Guide at ionaudio.com.

Safety Information

Important Safety Instructions
  1. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
  2.  Do not use this apparatus near water.
  3. Do not block any ventilation openings (if applicable). Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.
  4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.Do not place exposed flame sources such as lighted candles on the apparatus.
  5. Do not defeat the safety purpose of the polarized or grounding-type plug (if applicable). A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for yoursafety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
  6. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  7. Only use attachment/accessories specified by the manufacturer.
  8.  Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus (if applicable). When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
  9. Unplug this apparatus during lightning storms or when unused for long periods of time.
  10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,  the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.
  11.  Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and re-quipped with a proper plug for alternative voltage by a qualified service technician.Do not attempt to alter this yourself.
  12. Power Sources (if applicable):This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
  13. Caution: The danger of explosion if the battery is incorrectly replaced.Replace only with the same or equivalent type.Batteries (a battery pack or an installed battery) shall not be exposed to excessive heat such as sunshine, fire, etc.
  14. (If applicable) Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
  15. Warning (if applicable): Provide an earthing connection before the mains plug is connected to the mains. When disconnecting the earthing connection, be sure to disconnect it after pulling the mains plug out from the mains.
  16. For Class II apparatus only (if applicable): This symbol means the equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safe connection to the electrical earth.
  17. Class II Wiring (if applicable): To reduce the risk of electric shock, the external wiring connected to the terminals with “Class II Wiring” requires Class II wiring installed by an instructed person or the use of ready-made leads or cords.
  18. This apparatus is for professional use only. Intended operational climate: moderate.
  19. (If applicable) When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.
  20.  Warning (if applicable): Excessive sound pressure (high volumes) from headphones can cause hearing loss.
  21.  Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.
  22. Warning (if applicable): Terminals marked with the lightning bolt symbol may be of sufficient magnitude to constitute a risk of electric shock.
  23. Minimum distances 10 mm around the apparatus for sufficient ventilation.

Safety Notices

report this ad

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

DANGEROUS VOLTAGE: The lightning flash with the arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (a) reorient or relocate the receiving antenna; (b) move this unit; (c) increase the separation between the equipment and receiver; (d) connect the equipment into an outlet on a circuit different from that to which the receiver is connected; (e) be sure that all cables are properly shielded, using a choke or ferrite where appropriate; (f) consult the dealer or an experienced radio/television technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

If apparatus contains a coin/button-cell battery: Warning: Do not ingest the battery—chemical burn hazard. The remote control supplied with this product contains a coin/button-cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Disposal of Batteries (if applicable):

  • Never dispose of any types of batteries in fire or near excessive heat or direct sunlight. Overheated batteries can rupture or explode.
  • If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc.
  • Alkaline batteries & lithium button cell batteries: You can safely dispose of alkaline and lithium button cell batteries with normalhousehold waste. They do not pose a health or environmental risk during normal use or disposal. (Alkaline batteries are composedprimarily of common metals like steel, zinc, and manganese.)Do not dispose of large amounts of alkaline or lithium button cell batteries in a group. Used batteries are often not completely “dead.” Grouping them together can bring these “live” batteries into contact with one another, creating safety risks. To avoid this, insulate each battery with tape or other non-conductive material to ensure it does not discharge. Proven cost-effective and environmentally safe recycling processes are not yet universally available for alkaline and lithium button cell batteries. Some communities offer recycling or collection of these batteries. For more information, refer to your local ordinances or contact your local government.
  • Lead-acid batteries: Dispose of lead-acid batteries by bringing them to an electronic waste center or recycling center, or dispose ofthem in accordance with your local ordinances. (Rechargeable lead-acid batteries are the same type used in automobiles and should bedisposed of in a similar fashion.)This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development (ISED) Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Service Instructions

  • Disconnect the power cord before servicing.
  •  Replace critical components only with factory parts or recommended equivalents.
  • For AC line powered units: Before returning repaired unit to the user, use an ohmmeter to measure from both AC plug blades to all exposed metal parts. The resistance should be more than 2,000,000 ohms.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,