ipega PG-XBX012 XBX Cooling Fan User Manual

XBX Cooling FanManual(PG-XBX012)

Illustration

:

Product features:

  1. This product is suitable for heat dissipation of XBX original game console.
  2. With cooling fan switch and Indicator of cooling fan working status
  3. With USB 2.0 female adapter,Does not occupy the USB interfaceof console.
  4. Can dissipate heat and cool the XBX console

Electrical parameters:

Working voltage: 4.75V-5.25VWorking current: < 150mA

Applicable instructions:

  1. Insert the USB male of PG-XBX012 cooling fan into the USB interface on the back of XBX console, and pay attention to that the cylindrical pin at the bottom of the cooling fan needs to be embedded into the console shell.
  2. When it is necessary to dissipate heat the XBX console, press the square N.S on the top of product, the indicator light will be on, Then start to wokr, blowing air to the interior of the console.
  3. Press the switch again, the switch will pop up, the indicator will off, and the cooling fan stop working
  4. When the PG-XBX012 Cooling Fan USB male is inserted into the USB interface of XBX console (no matter whether the cooling fan is working or not), the USB female seat on the cooling fan has a complete USB 2.0 interface function

Product note:

  1. When the fan is under operation, please do not attempt to lock the fan for long time. This will cause the fan to be continuously stopped and generate high heat and burn the fan.
  2. When installing the fan, please pay special attention, if the installation is not in place, it will vibrate and generate noise.
  3. When this product is not in use, the power USB plug should be unplugged from the XBX console.
  4. When this product is used or stored, dust and heavy pressure should be avoided as much as possible, so as not to affect the lifetime.
  5. This product cannot be used or stored in a humid environment.
  6. This product is immersed in water, crashed or broken due to improper use, and electrical performance problems occur, so please stop using it.
  7. If there is any damage, please send it to the maintenance department for disposal, and do not disassemble it by yourself.Patent NO. : ZL202130111367.1

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,