Model #MA-7000-WH
Thank you for purchasing the iReliev® Hand & Wrist Massager. Please read this user manual carefully and keep it in a safe place for future reference.
What’s Included?
- Hand & Wrist Massager
- Type-C USB Cable
- Travel Bag
- Instruction Manual
Product Specification
Product Name | Hand & Wrist Massager |
Model Number | MA-70000-WH |
Rated Voltage | 100V-240V 50Hz/60Hz |
DC Input | 5V 1A |
Default Auto-off Timing | 15 Minutes |
Recharge Timing | s6 Hours |
Battery Type | 3.7V, 2500mAh (9.25Wh), 1865 lithium-ion battery |
- Do not use this product in high moisture, high temperature, or dusty environments to avoid product malfunction.
- Do not use in places that have a high density of gas, paint thinner, alcohol, bleach, or other corrosive materials to avoid discoloration, deformation, cracking, or malfunction.
- Do not sit or place heavy objects on this product.
- Avoid long-term exposure to direct sunshine.
- Do not plug the product into the supplementary switch.
- Stop using immediately if you experience extreme pain. Contact our customer support team for assistance.
- Do not place liquid or lotion onto this product or on your hands before or during use.
- This product is not recommended for use by children, pregnant women, or elderly people without a doctor’s approval.
DANGER – To reduce the risk of electric shock:
- Unplug the power adapter after use and before cleaning the product.
- Unplug the power adapter immediately if dropped into the water.
- Please do not soak the product in water or other liquid.
- Avoid using in bathtubs or near water sources.
WARNING- To reduce the risk of burns, electric shock, or injury:
- Unplug the power adapter when the product is not in use.
- Do not use this product if the power cord or adapter is damaged.
- Keep the power cord away from heat.
- Do not pull the product by its cord or use the cord as a handle.
- Please keep this product out of the reach of children.
Product Diagram
Charging
Control Panel
- POWER: Press the POWER button to turn it on and off. This product is designed to be a two-step operation to save energy. When the battery power falls below 20%, the POWER light will flash to indicate it is charging.
- MODE: After powering on, press the MODE button to activate Mode 1. Press repeatedly to select your preferred model. The cycle is as follows: Mode 1 – Mode 2 – Mode 3 – Mode 4 – Mode 5 – Mode 6 – Stop Air Pressure.
- AIR-PRESSURE INTENSITY: Press the INTENSITY button once to set the air-pressure level to 13 (medium). Press repeatedly to increase or decrease Cycle is as follows: 13 -14 -15 – 16 (Highest) – I1(Lowest) -12 -13. Continue pressing to repeat cycle repeats.
- Heating Button.Press the button to turn on or turn off the heating function.NOTE: It takes about 5 minutes to reach the optimum temperature.
- Vibrating Massage Button:Press the button to turn on or turn off the vibration. There are 2 modes of vibration from which to choose.
Mode Descriptions:
P1: Combination between fingers, palms, and wrists massage alternately andP2: Automatic leisure massage.P3: The combination between fingers, palm, and wrist massage synchronously.P4: Wrist massage.P5: The combination between finger, palms, and wrists massage alternately.P6: Palm massage.
Cleaning & Storage
- Please unplug the product before cleaning.
- Use a damp sponge to clean the product.
- Keep product stored in a cool, dry place.
- Please fully recharge the product before storing it for long periods of non-use.
Questions & Answers
Problems | Solutions |
Not working | 1. Please fully charge the product before the first use.
2. Two-step operation. Please turn the power ON, and then press the MODE button. |
POWER light flashing | flattery power is below 20% and it is charging. |
Warranty & Customer SupportIf you need help regarding product issues, after-sales service, or other relevant problems, please contact us at 855-723-2582 or [email protected]
Made in china
[xyz-ips snippet=”download-snippet”]