iTech Fusion 2019 Smartwatch
This manual is only for the US variant of the iTECH Fusion. If you purchased this outside of the US, please refer to the international manual.
iTECH Fusion USER GUIDE:
Everything you need to know about the iTECH Fusion Smartwatch
What’s in the box?
Your iTECH Fusion box includes:
- iTECH Fusion Smartwatch
- Clamp Charging Cable(Color and material vary)
The iTECH Fusion comes in a variety of colors and materials, which are sold separately.
Setting up your iTECH Fusion Smartwatch
For the best experience, use the iTECH Wearables app for iPhones and Android phones. A smartphone is required for call, text, and smartphone app notifications.
Charge Your Smartwatch 
A fully charged iTECH Fusion has a battery life of up to 7 days (standby time).Battery life and charge cycles vary based on usage.
- Plug the charging cable into the USB port on your computer or a UL-certified USB wall charger.
- Insert the watch into the charging cable clamp.The pins on the charging base must lock securely with the smartwatch. A battery icon appears on the screen to indicate your smartwatch is charging.
Note: Your iTECH Fusion takes about 2 hours to fully charge.
Set Up with Your Smartphone
The free iTECH Wearables app is compatible with most iPhones and Android Phones
To get started:
1. Find the iTECH Wearables app in one of the locations below, depending on your smart device.
- Apple App Store for iPhones
- Google Play Store for Android Phones
2. Download and install the iTECH Wearables App
YOUR iTECH Fusion Smartwatch WILL ONLY WORK WITH THE iTECH Wearables APP SHOWN ABOVE.
This watch only functions with this app and there will be connectivity issues if the incorrect app is used. For more information and links to the app, go to: www.itechwearables.com/setup
3. When the app is installed, open it to be guided through a series of questions that help you create a profile. Continue to follow the on-screen instructions to connect your iTECH Fusion Smartwatch to your smartphone. (We highly encourage the user to allow allnotifications & pairing access to their smartphones.)
4. To connect & sync your smartwatch to your device, tap on click to connect to search for your iTECH Fusion Smartwatch.
Please read through the guide to learn more about your new smartwatch and then explore the iTECH Wearables App
See your data in the iTECH Wearables App
Sync iTECH Fusion Smartwatch to transfer your data to the app, where you can view your exercise (Steps, Miles, Calories burned, and duration), sleep (restful, light, and awake) data, heart rate, and more. We recommend syncing your smartwatch to the app at least once a day.
Enable the auto-sync feature to sync data from your watch to your phone.Go to Device > Smartwatch Settings > Auto-sync data. Each time you open the iTECH Wearables app, your smartwatch will sync automatically when it’s nearby.
BASICS
Learn how to best navigate your iTECH Fusion Smartwatch
iTECH Fusion has a vibrant LCD display and a one-touch button for navigation.Navigate iTECH Fusion by pressing the 
button. The home screen is the watch face of the smartwatch.
- Press the button to switch between apps on your smartwatch.
- Hold the button to select and activate an app, function or feature such as, stopwatch, sports mode, heart rate and powering off your smartwatch.
- Hold the button on the home screen of your smartwatch to switch the clock face to a desired style.
Apps on Your iTech Fusion
Apps and Features
WEAR AND CARE
This iTECH Wearables product is meant to be worn all day and night, so it’s important to follow a few simple guidelines as you wear and care for your device.To keep your band clean and your skin happy, we recommend the following tips:
- Clean your band and wrist regularly – especially after intense workouts or sweating.
- Rinse the band with water or wipe it with a small amount of rubbing alcohol. Do NOT use hand soap, dish soap, hand sanitizer, cleaning wipes or household cleaners, which could get trapped beneath the band and irritate your skin.
- Always pat dry the band before putting it back on
Note: Although the iTECH Fusion is IP67 water resistant, it is not IP68 waterproof which means you should not submerge your watch in water deeper than one meter for longer than 30 minutes. We advise not to swim with your smartwatch. However, your iTECH Fusion can withstand many splashes, rain, and daily activities such as washing dishes. If your smartwatch gets wet, we advise you to remove it until dry.
It is not good for your skin to wear a wet band for long periods of time.
Make sure to wear your band loosely enough that it can move back and forth on your wrist. Prolonged rubbing and pressure may irritate the skin, so give your wrists a break by removing the band for an hour or two after extended wear.
IMPORTANT TIPS:If you have allergies, asthma, or eczema, you may be more likely to experience a skin irritation or allergy from a wearable device. If you start to experience skin irritation or redness on your wrist, remove your device. Contact a dermatologist if symptoms persist longer than 2-3 days of not using your wearable device.
UPDATE, RESTART, AND ERASE
If you can’t sync your iTECH Fusion, or if you have trouble with connected GPS ortracking your stats, you can power off and restart your tracker from your wrist or app. From the smartwatch, navigate to the turn off screen and hold the one-touch button to turn off your smartwatch. If restarting the smartwatch doesn’t address the issue, tap Factory Reset Smartwatch in Device settings.
REGULATORY & SAFETY NOTICES
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operated in conjunction with any other antenna or transmitter.FCC ID: 2ARUI-08068
Downloads
iTech Fusion 2019 Manual –
iTech Fusion 2019 Manual –
iTech Fusion 2019 French Manual –
[xyz-ips snippet=”download-snippet”]