iTechpai Technology True Wireless Stereo Earphones Manual

TWS(true wireless stereo)earphones V5.0+EDRManualFCC ID:2AVC2-I12-PE

Specifications:

True wireless stereo (TWS). real no wires design, individual left and right channel, HIFI sound. both the left and right earbud are Bluetooth enabled, could be used separately, or used as one pair.Specification:

Headphone use steps and special instructions

1. Turn on the charging box switch (blue or red light is on)
2. Open the top cover of the charging box and take out the earphones. (Important note: Turn on the charging box switch before opening the charging box, which is the premise of the headset automatically turning on)
3. Pair with other devices: Open the phone or other device Bluetooth settings, search for the Bluetooth name, click to connect to Bluetooth
4. The headset is placed in the charging box to enter the charging mode, and the headset is automatically turned off.
5. Tws wireless headphones can be connected separately and separately to other Bluetooth devices.
6. Tws wireless headset will automatically shut down if it is not connected to the Bluetooth device for 5 minutes.

Headphone touch function description

1. Press and hold for 3 seconds to start the automatic pairing (you can also pick up the automatic pairing at boot).
2. After booting, the left and right ears support the independent pop-up function for the Apple mobile phone.
3. Press 2 seconds to reject the call, short press to answer, short press to hang up.
4. When the mobile phone is connected to standby. short press to play music, short press to pause playback.
5. After the two headphones are paired, the primary and secondary headphones are automatically generated,
6. When listening to the song, the main ear continuously touches 2 times to play the next song. and long press for 2 seconds wil “click” for a volume.When added to the maximum, there wil be an English broadcast prompt for the maximum volume.
7. The double ear is the last song. Press and hold for 2 seconds to make a ‘beep’ sound to reduce the volume until there is no sound.
8. Touch 3 times in a row to wake up the Apple SRI function (Android, wake up voice assistant).
9. Press and hold for 3 seconds to turn off (automatically turn off when the charging and charging compartment is charged).

Warnings:

1. Please do not overuse this earphone or put it under heavy pressure, keep away from wet and heat.
2. Keep away from WIFI, router or other high frequency transmitting equipment to prevent interruption of signal receiving.
3. Please use this earphone under its working range (10-25m), and the effect would be better if there is no obstacle between the connected devices.
4. Use this Bluetooth earphone to connect any device with Bluetooth function

Summary

1. Headphone dust screen
2. Multi—function touch button
3. MIC
4. Charging port
5. Charging box charging port

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure StatementThe device has been evaluated to meet general RF exposure requirement. The device ca n be used in portable exposure condition without restriction

iTechpai Technology True Wireless Stereo Earphones Manual – iTechpai Technology True Wireless Stereo Earphones Manual –