ERE0EEPortableMagnetic ChargingRechargeable Flashlight
Specifications
- LED: CREE XPL HD, up to 50,000 hours lifetime
- Output: max 1000 lumen
- Reflector. precise metal filmed
- Glass: AR coated &high light transmission glass
- Modes: Turbo-High-Medium-Low-Strobe-SOS
- Working Voltage: 2.0V-4.2V
- Compatible Batteries: 116340 0r 1 CR123A
- Material: Aerospace Aluminum All0y 6061-T6, HA-Al military hard anodizing
- Switch side switch
- Dimensions. 21(Head&Body)L70.5mm
- NW: 49.5g(without battery)
- G.W: 163g
- Accessories Included: 1magnetic charging cable, 116340 battery with USB port, 1 holster, 1clip, 10- ring, 2screws
ANSI Chart
FL1 STANDARD | TURBO | HIGH | MEDIUM | LOW | STROBE |
SOS |
Output | 1000LM | 400LM | 6OLM | 2LM | 1000LM | 1000LM |
Runtime | 45min | 2h | 12h | 150h | 1.5h | |
Max light intensity | 4,500cd | |||||
Max Range | 150m | |||||
Impact Resistance | 1m | |||||
Waterproof Rating | IPX-8 |
Note: all data above were generated in the Fitorch lab.Differences may happen base on usage and conditions.
Operation
- Battery Loadinsert the 116340/1CR123A into the housing of ER2O
- On/OffWith the light unlocked, click the side switch to turn on/off.
- Mode changewhen power is on, press the side switch for 0.5s to cycle through Turbo-High-Medium-Low-Medium-High- Turbo
- Strobe & SOSWith the light unlocked and when power off, double click the side switch to enter strobe, double click again to SOS.When powering on, double click the side switch in any mode to enter Turbo– (double click) Strobe – (double click) SOS
- Low ModeWhen power off, press the side switch for 0. 5s to Low Mode
- Memory FunctionWhen power off, click the side switch to enter the model of last using
- Lock & UnlockWhen power off, click the side switch 5 times in succession to lock the switch(the light will blink to indicate locked status). And then click the switch 3 times in succession to unlock the switch
- Power DetectionWhen power off, click the side switch 3 times in succession to enter power detection. the lamp under the side switch button will blink In Green and Red, one Green blink Indicates 1V, one Red blink Indicates In 0,1V, for Instance, 3.8V, 3 Green blinks, and 8 red blinks.
- Beacon FunctionWhen power off, click the side switch 4 times in succession to enter the beacon function.
- Magnetic ChargingConnect the US8 port of the cable to any power source, and then hold the other end of the cable close to the charging port on the flashlight.
Store and Maintenance
- Disassembling the sealed head will damage the lights and void the warranty
- High-quality batteries are recommended
- O-ring will be worn after a Long-term use, change it In included spare one to maintain a watertight seal unload the batteries if assured the torch won’t use a bit of
- long time, then better put It into the Inner box
- Store and keep the torch off fee, statics, steaming, and humidity surroundings
- Clean the body with soft fabric clothing then lubricate In silicon grease per half a year.
- Periodic cleaning of batteries contacts to improve the flashlight performance as dirty contacts cause the lamp flicking, shine intermittently or even fail to illuminate for the below factors.A: Battery needs replacing ( choose the battery which mentions in this manual)B: PCB, Spring, or other contacts is dirty (clean the contacts In cotton swab In soaked rubbing alcohol)
WARNING!Looking at the light for a long time will harm your eyes.
Warranty
F[TORCH guarantees: this torch is found to be defective on function under normal use within5 years from the purchase date, will be repaired or replaced with any charge
Warranty
- Please contact your original F[TORCH dealer for replacement and repairs.
- If the warranty issue cannot be resolved by the dealer, please contact
- FITORCH at [email protected] for assistancePlease provide the following information to expedite the process1)List the serial number on the light.2) Include a detailed description identifying the issue, accompanied by pictures or a short video demonstration if necessary3)Provide the name and store of the dealer you made the purchase from; and a copy of the proof of purchase.
Website | |
@fitorchstore |
http://www.fitorchworld.com/ |
Shenzhen Fitorch Electronics Technology Co., LtdOffice Address:6F, Longsheng Commercial BuildingDalang St, Longhua new districtShenzhen City, ChinaTel: +86-755-2101-3606Web: www.fitorchworld.comE-mail: [email protected]
[xyz-ips snippet=”download-snippet”]