JASCO All-in-One 7-day Digital Timer Installation Guide

Table of Contents

JASCO All-in-One 7-day Digital Timer Installation Guide

Specifications

Power: 120 VAC
Signal Frequency: 60Hz
Maximum Load: 1200 W tungsten, Ballast 1200VA, Electronic Ballast5A, 1/2 HP motor, 1800 W (15 A) restive
Maximum Traveller Length: 200 ft.
Operating Temperature:32-104 °F (0-40 °C)
Operating Humidity: 5-85%
Minimum Hole for Wire: #12 AWG (0.081 dia) and #14 AWG wire
Warranty: 1-year limited product warrantyRequires neutral wire. Switch must be mounted indoors.

Design Features

Simple myTouchSmart Programming
SunSmart Technology – Automatically adjusts to sunrise and sunset times in your region
24 Hour Countdown Mode
7-Day – Daily or Weekly Settings
8 Custom my ON/my OFF settings
ON/OFF button overrides the current setting and blends in with other switches
Single Pole and 3-Way
Easy Installation – Screw terminals, no flying leads
Rechargable NiMH battery automatically saves settings and is a back up battery for up to 30 days
Works with LED, CFL, Incandescent & Halogen · Light up backlight
White or Light Almond door gives timer a classy look and works as an On/Off Over-ride switch

White/light almondcovers included

ON/OFF switchopens to revealprogram buttons

Single-pole Wiring
Timer on LOAD Side 3-way Installation
Timer on LINE Side 3-way Installation
Additional Installation Information
- Indoor use only
- Wall plates sold separately
- Bilingual instruction manual – English and Spanish
- Visit myTouchSmart.com for more information
Device Configuration
1. Just scroll to set the current time
2. Select your region so sunsmart technology /sunset times in your area.
3. Choose from preset options or set custom times.
Certifications & CompliancesCompliances, specifications and availability are subject to change without notice Distributed by Jasco Products Company LLC 10 E. Memorial Rd., Oklahoma City, OK Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7AM-8PM, M-F, Central Time.©Jasco 2021