JBL Cruise Manual

1. What’s in the box

Screw bags as accessories are not included in the box, please order it separately per specific needs

  1. Check the screw type of both side of the motorcycle mirrors
  2. Determine what type of screw bag to be ordered and also whether left-handed screw bolts ,nuts and adjust screw are required or not
  3. Order and select bolts , nuts and adjust screw accordingly before starting installation

Design for M10 PE bag

Design for M8 PE bag

Design for Harley Davidson 1200 custom PE bag

2. Buttons

3. Design for motorcycles’ mirror screw type M8, M10 and Harley Davidson 1200 custom

 

4. Installation of speaker for M10 screw type

  1. Disassemble left M10 mirror from motorcycle
  2. Take the M10 bolt with M10 nut 2pcs, Φ10.5 washer 2pcs and Φ10.5 spring washer 2pcs from M10 PE bag
  3. Screw M10 bolt into the left speaker holder
  4. Screw M10 bolt into left motorcycle mirror hole
  5. Screw M10 Adjust screw into left speaker holder hole6. Screw the M10 mirror into left speaker holder

5.Installation of speaker for M8 screw type

  1. Disassemble M8 mirror from motorcycle

  1. Take the M8*60 bolt from M8 PE bag and take M8 nut 2pcs, Φ8.5 washer 2pcs and Φ8.5 spring washer 2pcs from share part PE bag
  2. Screw M8 nut, Φ8.5 washer and Φ8.5 spring washer onto M8*60 bolt
  3. Screw M8*60 bolt into the Left speaker holder
  4. Screw M8*60 bolt into left mirror hole after assembled Φ8.5 spring washer, Φ8.5 washer on it.
  5. Screw M8 Adjust screw into hole of the left speaker holder
  6. Screw M8 Left mirror into speaker holder holePlease follow the same installation process to install the right speaker

6. Speaker for Harley Davidson 1200 custom installation

  1. Disassemble UNF5/16’’ left mirror from motorcycle
  2. Take the M8*90 bolt from Design for Harley Davidson 1200 custom PE bag and take M8 nut 3pcs, Φ8.5 washer 3pcs and Φ8.5 spring washer 3pcs from share part PE bag
  3. Screw M8 nut, Φ8.5 washer and Φ8.5 spring washer onto M8*90 bolt
  4. Screw M8*60 bolt into the Left speaker holder
  5. Screw M8*90 bolt into left mirror hole after assembled Φ8.5 washer, Φ8.5 spring washer, M8 nut on it.
  6. Screw UNF5/16” Adjust screw into hole of the left speaker holder
  7. Screw UNF5/16” nut, Φ8.5 washer and Φ8.5 spring washer onto mirror bolt
  8. Screw UNF5/16” Left mirror into speaker holder hole

7. After Installing the left and right speakers please follow the sequence to connect the cable

  1. Audio Cable connection Connect Audio Cable from right speaker to left speaker.
  2. Power cable connection Connect the power cable to the battery from the left speaker.

8. Bluetooth ® pairing mode

9. LED indication

10. USB charging

5W output to charge smart phone

11. Warning

Please keep the cable away from high temperature component.

12. Specifications

  • Model No.: JBL Cruise
  • Transducer: 2 x 65mm
  • Rated Power: 2 x 5 Wrms
  • Frequency Response: 90Hz to 15kHz
  • Signal-to-Noise Ratio: > 80 dB
  • Bluetooth Version: 3.0
  • Support: A2DP V1.2, AVRCP V1.4
  • Multi-points (up to 2 phones)
  • Maximum RF Transmitter Power: 9dBm (EIRP)
  • Bluetooth Transmitted Modulation: GFSK,π/4DQPSK, 8DPSK
  • Bluetooth Frequency: 2.402GHz-2.48GHz
  • Dimensions (H x W x D): 101mm x 123mm x 147mm
  • Weight: 1215g

The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

 

JBL Cruise Manual – JBL Cruise Manual – 

Posted

in

by

admin

Tags:

,