JBL CSHM10 Dynamic Vocal Microphone User Guide

CSHM10DYNAMIC VOCAL MICROPHONEUSER GUIDE

For more information or support,call 1800 208 8880 or|write to indiaprocarefaharnnan.comFOLLOW USharmanproindiaofficialHarman Professional IndiaharmanproindiaharmanproindiaharmanproindiaAll product images shown are for illustration purpose only and may not be an exact representation of the product. The actual product may vary in color, size, and finishing. © 2020 HARMAN International Industries Inc. All rights reserved.

BOX INCLUDES

  • Handheld vocal microphone

CONNECTING THE MICROPHONE

  • The microphone provides a balanced output on a 3-pin male XLR connector.
  • You can connect the microphone either to a balanced or unbalanced microphone input.
  • To connect the microphone to a balanced input (XLR connector), use a commercial XLR
  • To connect the microphone to an unbalanced microphone input (1/4″ jack), use a cable with a female XLR connector and a 1/4″ TS jack Please note that unbalanced cables may pick up interference from stray magnetic fields near power or lighting cables, electric motors, etc. like an antenna. This may cause a hum or similar noise when you use a cable that is longer than 16 feet (5 m).

SWITCHING THE MIC ON/OFF

  • To switch the microphone ON, slide the ON/OFF switch toward the front grill ION position).
  • To switch the microphone OFF, slide the ON/OFF switch toward the microphone cable (OFF position).
  • To prevent unwanted bursts of noise, be sure to switch the microphone OFF before connecting or disconnecting the microphone cable.

CLEANING

  • Use a soft cloth moistened with water to clean the surface of the microphone body.
  • Internal windscreen
  • Unscrew the front grill from the microphone CCW.
  • Remove the windscreen from the grill and wash the windscreen in soap suds.
  • Allow the windscreen to dry overnight.
  • Replace the windscreen in the front grill and screw the front grill on the microphone CW.

FEATURES

  • Rugged body
  • Dynamic super-cardioid capsule
  • ON/OFF switch
  • Lightweight

SPECIFICATION

  • Polar pattern: Supercardioid
  • Frequency range: 80-15000 Hz
Polar pattern Supercardioid
Audio frequency bandwidth 80 – 15000 Hz
Sensitivity -55dB ±3dB (OdB=1V/Pa at 1KHz1
Max. sound pressure level 124 dB
Electrical impedance 6000hms ± 30°/011kHz1
Length 180 mm
Diameter 51 mm

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,