JBL OnBeat Micro Manual
When on battery power:
- The JBL OnBeat Micro will automatically enter the Standby mode after it detects no audio signal for 5 minutes (after 10 minutes when on AC power). Upon detecting an audio signal the system will turn on and play audio.
- The JBL OnBeat Micro will not charge a docked iPhone.
Specifications
Transducers: 2 x JBL full-range transducersAmplifier power: 2 watts x 2Frequency response: 110Hz – 20kHzSignal-to-noise ratio: 73dBInput impedance (Aux): 3k ohmsBattery size/type: 4 x AAAPower requirement: 5.9V DC, 3.33APower consumption: 20W (maximum); 0.5W (standby)Dimensions (H x W x D): 2-1/4″ x 6-5/8″ x 6-5/8″ (54mm x 168mm x 168mm)Weight: 0.8 lb (0.36kg)
HARMAN International Industries, Incorporated8500 Balboa Boulevard, Northridge, CA 91329 USA
© 2012 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
iPhone, iPod, iPod nano and iPod touch are trademarks of Apple, Inc., registered in the U.S. and other countries. iPod/iPhone not included.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod and iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
Features, specifications and appearance are subject to change without notice.
Part No. JBLP4952 Rev. A
JBL OnBeat Micro Manual – JBL OnBeat Micro Manual –