JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – fromheadset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lightingeffects to determining how the boom microphone side-tone works. jblquantum.com/engine
Software requirements
PLATFORMS: WINDOWS 7 or Higher500MB of free hard drive space for installation*QuantumSURROUND / QuantumSPHERE 360 and DTS Headphone:X V2.0available on Windows only. Software installation required.
WHAT’S IN THE BOX
Requirements
JBL QuantumEngine SOFTWARE REQUIREMENTSPLATFORMS: WINDOWS 7 or Higher500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION
System compatibilityPC | Xbox™ | PlayStation™ | Nintendo Switch™ | Mobile | MAC | VR
OVERVIEW
01 ANC / TALKTHRU LED02 ANC / TALKTHRU button03 Game audio-chat balance dial04 Volume Control05 Detachable Windshield foam06* Notification LED for mic mute / unmute07* Microphone Mute / unMute08 CHARGING LED09 3.5mm Audio Jack10 USB-C port11 Voice Focus Boom Microphone12 Bluetooth pairing button13 POWER ON / OFF slider14 POWER / 2.4G / Bluetooth LED15* RGB-lit JBL logo16 Flat-fold ear cup17 2.4G PAIRING BUTTON18 Volume Control19 MIC MUTE BUTTON* 
POWER ON & CONNECT
Bluetooth
SETUP
First-time setup
8a Go to Sound Settings8B UNDER “PLAYBACK” HIGHLIGHT JBL QUANTUM800 GAME AND SELECT “SET DEFAULT DEVICE”8C HIGHLIGHT JBL QUANTUM800 CHAT AND SELECT “SET DEFAULT COMMUNICATION DEVICE”8D UNDER “RECORDING” HIGHLIGHT JBL QUANTUM800 CHAT AND SELECT “SET DEFAULT DEVICE”8E IN YOUR CHAT APPLICATION SELECT JBL QUANTUM800 CHAT AS THE DEFAULT AUDIO DEVICE
MICROPHONE
CHARGING
LED BEHAVIOURS
TECH SPEC
| Driver size: | 50 mm Dynamic drivers |
| Frequency response (Passive): | 20 Hz – 40 kHz |
| Frequency response (Active): | 20 Hz – 20 kHz |
| Microphone frequency response: | 100 Hz -10 kHz |
| Max input power | 30 mW |
| Sensitivity: | 95 dB SPL @1 kHz / 1 mW |
| Maximum SPL: | 93 dB |
| Microphone sensitivity: | -40 dBV @1 kHz / Pa |
| Impedance: | 32 ohm |
| 2.4G Wireless transmitter power: | <0 dBm |
| 2.4G Wireless modulation: | π/4-DQPSK |
| 2.4G Wireless carrier frequency: | 2403.35 MHz – 2479.35 MHz |
| Bluetooth transmitter power: | <9 dBm |
| Bluetooth transmitted modulation: | GFSK, π/4 DQPSK, 8DPSK |
| Bluetooth frequency: | 2.402 GHz – 2.480 GHz |
| Bluetooth profile version: | A2DP 1.3, HFP 1.6 |
| Bluetooth version: | V5.0 |
| Battery type: | Li-ion battery (3.7 V / 1300 mAh) |
| Power supply: | 5 V 2 A |
| Charging time: | 2 hrs |
| Music playtime with RGB lighting off: | 14 hrs |
| Microphone pickup pattern: | Unidirectional |
| Weight: | 410 g |
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and tradenames are those of their respective owners.
References
[xyz-ips snippet=”download-snippet”]