Matrix Executive Electric Height Adjustable Desk [JBMATEL12K, JBMATEL15K] User Manual

Matrix Executive Electric Height Adjustable Desk

JBMATEL12K, JBMATEL15K

User Manual

1. Learning Process & Stroke Reset

A. Learning Process:

Press and button for 3 seconds after the initial assembly of the desk.

B. Stroke Reset

If the desk loses power or if the display shows either of “E10, E20 and E60”, press the button for 3 seconds or until it shows , the desk will automatically move down to the lowest point and rebound back up. The learning process & stroke reset is then finished and will display the lowest height position.

2. Lifting

The desk will go up and down when pressing or .

3. Height memory setting

Move the desk up or down to a desired position. Press the button after which the display will blink, then press a numeric key ( ) to save the desired height to the corresponding preset position. The display will stop blinking and exit the memory mode if there is no numeric key pressed within 5 seconds. Once you have saved the desired heights you can press that numeric key to automatically move the desk to the saved height.

4. Setup Mode

1. Press and hold the button for 3 seconds, display will show “S–” and blink.
2. Press the button to move through the below setup menu functions, the function list is as follows:

• Unit（ ）: Display height on screen in centimeters or inches;
• Brightness（ ）: Brightness of the controller;
• Beep（）: Turn on/off beep sound;
• Collision Force（）: Collision protection sensitivity;

To navigate through the setup menu use the below buttons：

Backspace key (back to previous menu) or Exit Setup Mode

Tab switch

Enter key (enter to next menu or confirm the current operation)

If there is no numeric key pressed within 20 seconds the Setup Mode will be exited.

5. Protection codes and warnings

Matrix Executive Electric Height Adjustable Desk [JBMATEL12K, JBMATEL15K] User Manual – Matrix Executive Electric Height Adjustable Desk [JBMATEL12K, JBMATEL15K] User Manual –