CDR171DVD Multimedia Receiver with Bluetooth® featuring a 7″ Touch Screen DisplayINSTALLATION & OWNER’S MANUAL
Safety NotesVideo playback will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when the vehicle is in Park and the parking brake is engaged. It is illegal in most jurisdictions for the driver to view video while the vehicle is in motion.Copyright NotesThis product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.Other trademarks and trade names are those of their respective owners.
WARNING
Upon installation of this monitor/media player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.Several states prohibit the installation of monitors/media players if the screen is visible from the driver’s seat. If you reside in a jurisdiction that has enacted such a law, this unit must not be installed so that the screen is visible from the driver’s seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.This unit is designed so that it may be operated only when the vehicle is in “Park” and the parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-out feature could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.Once the parking brake lock-out feature is installed, the owner/user must not attempt to disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.When operating this unit, keep the unit’s volume level low enough so that the vehicle’s occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
Safety Information
Please read all instructions carefully before attempting to install or operate.
Due to its technical nature, it is highly recommended that your radio is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.To prevent damage or injury:
- Make sure to ground the unit securely to the vehicle chassis ground.
- Do not remove the top or bottom covers of the unit.
- Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.
- Do not subject the unit to excessive shock.
- When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction.
- To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
- Use only the provided hardware and wire harness.
- You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.
- If you experience problems during installation, consult your nearest Jensen dealer.
- If the unit malfunctions, reset the unit as described on page 10 first. If the problem still persists, consult your nearest Jensen dealer or call tech assistance @ 1-888-921-4088.
- To clean the monitor, wipe only with a dry silicon cloth or soft cloth. Do not use a stiff cloth or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.
- When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while.
- When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm (AWG 18) or more to prevent voltage drops.
- Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Preparation
Before You Start
- Disconnect negative battery terminal. Consult a qualified technician for instructions.
- Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt, or excessive vibration.
Getting Started
- Remove trim ring from the unit.
- Remove 2 transit screws located on top of the unit.
- Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.
- Install mounting sleeve into the opening, bending tabs to secure.
- Connect wiring harness and antenna. Consult a qualified technician if you are unsure.
- Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).
- Test for correct operation and slide into the mounting sleeve to secure.
TYPICAL FRONT-LOAD DIN MOUNTING METHOD
Wiring Diagram – Inputs/Outputs
Note:When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 10 amp ATC mini-style fuse located on the power connector.Wiring Notes:Rear camera inputA rear view camera (not included) can be used with the Camera input.
Control Locations
| 1. Eject2. Auxiliary Input3. USB Port4. Microphone5. Tune/Track Down6. Mute / End Call | 7. Volume / Talk8. Band9. Mode / Voice Activation10. Open / Power11. Reset12. Mode13. Tune/Track Up |
General Operation
| Installing the Faceplate | Align the faceplate with the front of the unit, then snap in place beginning with the left side. |
| Power On/Off | Momentarily press  to turn the unit on or off. |
| Volume | Rotate the volume knob to increase or decrease the volume level. |
| Mute | Momentarily press MUTE to silence the audio. Momentarily press MUTE again to return to the previously selected volume. Rotating the volume knob while the volume is muted will also cancel the mute function. |
| Mode | Press MODE to step through all available input modes: Radio, Disc (which includes DVD and CD playback), USB, Bluetooth Phone, Bluetooth Audio, Auxiliary Input, Rear Camera and Settings. Modes of operation are indicated on the display and/or the monitor. Optional USB device must be connected/inserted to appear in the mode selection string. |
| Auxiliary Input | Connect external audio devices to the 3.5mm auxiliary input on the front panel. |
| USB | Connect a USB device to play MP3 files or view AVI video files or JPG photos. |
| Opening the LCD | Press OPEN to open or close the LCD screen. |
| Screen Angle | Press up  or DOWN  to adjust the screen angle up or down. |
| Main Menu | When the monitor is open, press the house icon in the top left corner to access the Main Menu screen. |
- Radio
- Media Player
- Bluetooth Phone
- Disc
- USB
- Bluetooth Audio
- Auxiliary Input
- Rear Camera
- Settings
General Operation
Setup Menu
From the Main Menu screen, select Settings to access the Setup menu and select from categories displayed on the left side of the screen: General, Clock, Audio, Bluetooth, Display and About. Use the touch screen to navigate and adjust individual options within each category.
Audio Settings:
- Volume
- EQ Settings
- EQ On/Off
- Loudness On/Off
- EQ Reset
- Return to Source
- EQ Presets / Custom
- Balance / Fader
Balance/Fader Settings:
- Volume
- Fader Reset
- Return to Source
- Return to EQ Controls
AM/FM Tuner Operation
| Radio Operation | Select the Radio icon from the Main Menu screen. |
| Current Mode / Main Menu 1 | Displays current mode of operation. Press to return to Main Menu screen. |
| Preset Stations 2 | Press and hold to set the current station in that preset spot. Press momentarily to recall the desired preset and begin playback. |
| AM 3 | Press to access AM bands. |
| FM 4 | Press to access FM bands. |
| Bluetooth 5 | Press to access Bluetooth phone. |
| Stereo / Mono 6 | Press to toggle between Stereo and Mono tuning. |
| Tune Down 7 | Press << to tune the radio to a lower frequency. Press and hold to tune the unit down one step at a time. |
| AS/PS 8 | Press to scan presets and listen to the first 10 seconds of each.Press again to stop scanning and listen to the station. Press and hold to automatically store the strongest stations as presets. |
| Direct Station Entry 9 | Press to display the keypad and directly enter the desired station number. |
AM/FM Tuner Operation
| Station Number 10 | Displays the current station number. |
| Station Search 11 | Press to search stations. |
| Tune Up 12 | Press >> to tune radio to a higher frequency. Press and hold to tune the unit up one step at a time. |
| Audio Settings 13 | Press to access and adjust audio settings. |
| Band 14 | Press to select between 2 AM and 3 FM bands. |
Media Player Operation
| Media Player Operation | Select the Media Player icon from the Main Menu screen. |
| Current Mode/Main Menu 1 | Shows current mode of operation. Press to return to Main Menu. |
| Bluetooth Music 2 | Press to access Bluetooth music. |
| USB 3 | Press to access files on USB device. |
| Bluetooth Phone 4 | Press to access Bluetooth phone. |
| Random 5 | Press to enable or disable Random playback. |
| Tune Down 6 | Press << to tune radio to a lower frequency. Press and hold to tune the unit down one step at a time. |
| Repeat 7 | Press to enable or disable Repeat playback. |
| Direct File Entry 8 | Press to display the keypad and enter the desired file number. |
| Play / Pause 9 | Press to pause or resume playback. |
| File List 10 | Press to display a list of all files on the device. |
| Tune Up 11 | Press >> to tune radio to a higher frequency. Press and hold to tune the unit up one step at a time. |
| Audio Settings 12 | Press to access and adjust audio settings. |
| Time Indicator 13 | Displays elapsed time/remaining time for the current file. |
| ID3 Metadata 14 | Displays current file information. |
Media Compatibility – CD/DVD
| File Type | MP3 | ||
| File System | 1509660 | Level 1, Level 2 | ✓ |
| Level 3 | X | ||
| 1509660Extension | JOLIET | Playback | ✓ |
| Filename | 32 bytes | ||
| ROMEOOMEO | Playback | X | |
| X | Filename filename | ||
| Apple ISO | X | ||
| FileExtension | .mp3/.MP3/.Mp3/.mP3 | ✓ | |
| .rmp/.m4a | X | ||
| MPEGFormat | MPEG 1 | ✓ | |
| MPEG 2 | ✓ | ||
| MPEG 2.5 | ✓ | ||
| SamplingFrequency | MPEG 1 | 32/44.1/48kHz | |
| MPEG 2 | 12/16/22.05/24kHz | ||
| MPEG 2.5 | 8/11.025/12kHz | ||
| Bitrate | MPEG 1 | 32 – 320kbps | |
| MPEG 2 | 8 – 160kbps | ||
| MPEG 2.5 | 8 – 160kbps | ||
| OtherInformation | Directory Depth | Unlimited | |
| File Name Length | 32 bytes | ||
| Total File Number | 2000 files | ||
| Total Folder Number | 200 folders | ||
| File Number via Folder | 2000 files | ||
| MP3 1D3 TAG | ver.1.x | ✓ | |
| ver.2.x | ✓ | ||
| Title, Artist, Album | ✓ |
Notes:
- It is not possible to view JPG files on the in-dash monitor while the vehicle is moving. This is a safety feature to prevent driver distraction.
- The JPG image viewer function will only operate when the vehicle is in the park and the parking brake is engaged as described on page 26.
Media Compatibility – USB
| File Type | M P3 | ||
| File System | FAT | FAT 12 | x |
| FileExtension | .mp3/.MP3/.Mp3imP3 | ✓ | |
| .rmp/.m4a | X | ||
| MPEGFormat | MPEG 1 | ✓ | |
| MPEG 2 | ✓ | ||
| MPEG 2.5 | ✓ | ||
| SamplingFrequency | MPEG 1 | 32/44.1/48kHz | |
| MPEG 2 | 12/16/22.05/24kHz | ||
| MPEG 2.5 | 8/11.025/12kHz | ||
| Bitrate | MPEG 1 | 32 – 320kbps | |
| MPEG 2 | 8 – 160kbps | ||
| MPEG 2.5 | 8 – 160kbps | ||
| OtherInformation | Directory Depth | Unlimited | |
| File Name Length | 32 bytes | ||
| Total File Number | 2000 files | ||
| Total Folder Number | 200 folders | ||
| File Number via Folder | 2000 files | ||
| MP3 ID3 TAG | verix | ✓ | |
| ver.2.x | ✓ | ||
| Title, Artist, Album | ✓ |
Notes:
- For USB mode, it is not possible to view JPG files on the in-dash monitor while the vehicle is moving. This is a safety feature to prevent driver distraction.
- The JPG image viewer function will only operate when the vehicle is in the park and the parking brake is engaged.
- Due to ongoing technological advancement, some USB flash drives may be incompatible with this unit.
Media Compatibility
| Media Compatibility | The following types of discs/files are compatible:
The following types of discs/files are not compatible:
Some recordable DVD’s and CD’s may be incompatible with this unit, depending on media type and recording method. |
| Playback Order | MP3 playback sequence begins in the root folder of the disc, USB flash drive. Any empty folders or folders that do not include MP3/JPG files are skipped. |
| Compatible Recording
Formats |
ISO9660 standards:
|
| Notes | Some files may not play or be displayed correctly, depending on the sampling rates and bit rates.For best results, use the following settings when ripping MP3 files: 128kbps or higher constant bit rate 44.1kHz or higher sampling frequency |
DVD Operation
| Inserting a Disc | Insert disc into the slot, and playback will begin automatically.
Sub-menus may have to be pressed to access the DVD content. Read the directions of your specific DVD disc for other features. |
| Ejecting the Disc | Press  to eject the disc. |
| Touchscreen Controls | Press anywhere on the LCD to display touch screen controls. |
| Disc Menu 1 | Press to select disc menu. |
| Audio Settings 2 | Press to adjust audio settings. |
| Previous Chapter 3 | Press to return to the previous chapter. |
| Play / Pause 4 | Press to pause or resume playback. |
| Next Chapter 5 | Press to advance to the next chapter. |
| Next Page 6 | Press to display the next page of options. |
DVD Operation
| Direct Entry 7 | Enter a chapter number directly to begin playback. |
| Audio 8 | Press to access and adjust audio settings. |
| Repeat 9 | Press to repeat current chapter. |
| Random 10 | Press to enable or disable random playback. |
| Next Page 11 | Press to display the next page of options. |
Bluetooth Operation
| Preparation | Before you can use a Bluetooth device, it must be paired and connected. Make sure that Bluetooth is activated on your device before you begin the pairing process. |
| Pairing a New Device | The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details. The device name is “JENSEN CDR171”.The Bluetooth passcode is “0000”. The unit can be in any mode of operation when pairing is performed. On certain phones, pairing may need to be done more than once. |
| Connecting a
Paired Device |
Most Bluetooth devices support the auto-connect feature and will connect automatically if the device is in range when the unit is powered on. If your device was previously paired but does not connect, enter the Bluetooth setup menu and ensure that Auto Connect is On. |
| Bluetooth Phone | To access the phone, select Bluetooth Phone from the Main Menu or press the phone icon from any operational mode. |
| Current Mode / Main Menu 1 | Displays current mode of operation. Press to return to the Main Menu screen. |
| Phone Keypad 2 | Use the phone keypad to dial the desired phone number.Alternately, numbers can be dialed directly from the phone. |
| Display Keypad 3 | Press to display phone keypad. |
| Contacts 4 | Press to access the contact list. |
| Backspace 5 | Press to backspace when typing a phone number. |
| Recent Calls 6 | Press to display a list of recent calls. |
| Devices 7 | Press to view available devices. |
Bluetooth Operation
| Talk 8 | Press to connect a call. |
| Phone Number 9 | Shows the phone number dialed. |
| End Call 10 | Press to end the current call. |
| Settings 11 | Press to transfer call between the head unit and the mobile phone. |
| Mute 12 | Press to mute call audio. |
| Keypad 13 | Press to display the keypad. |
Front 3.5mm Aux Input
Auxiliary Input
Connect an optional audio source into the 3.5mm (front panel) input.Select auxiliary input from the Main Menu to listen to audio.Adjust the volume on the external audio source as needed (if connected to the headphone output of the device).
Rear Camera Operation – (Optional)
Using Rear Camera
Connect an optional rear camera to the Camera Input (Black RCA connector). Refer to the wiring diagram for details.Manual selection – Touch CAMERA icon from the Main Menu or from any operational mode (when enabled) to select camera mode. Touch the top left area on the screen to exit camera mode.Note: The manual mode is for dedicated cameras that are ALWAYS on while driving, it is not meant for cameras that are connected to the vehicle’s reverse light.
Auto Selection
The unit will automatically select camera mode when connected to the reverse lamp circuitry.Note: The external video output is not active when using the rear camera input.
Voice Assistant
Your receiver is designed with an easy access voice activation button to use Siri® or the Google Assistant™ via your car’s Bluetooth. Interact with your martphone assistant while you drive with only the push of a button! 
Bluetooth should be paired between your smartphone and the receiver. Press the voice activation button, and the receiver will switch into Bluetooth mode, This will activate Siri® or Google Assistant™ on your smartphone. You will need to manually switch back to the previous or desired mode once this operation is terminated.
SWC Input Operation
The built-in SWC Interface is compatible with PAC steering wheel control modules.The PAC SWI-RC is recommended. A third-party adapter must be used in order for the XDVD600 to be compatible with any steering wheel controls. The following controls are available for most vehicles.
| 1. Volume Up (+) | 4. Preset (+) | 7. Seek/Track Up (+) | 10. BT Talk |
| 2. Volume Down (-) | 5. Preset (-) | 8. Seek/Track Down (-) | 11. BT End |
| 3. Mute | 6. Mode | 9. Band |
Note: Not all OE steering wheel functions may be supported by the XDVD600.
PAC SWI-RC Installation Hints
- Set “Radio Select Switch”. Set the SWI-RC to position 7 – “Pioneer/Other/Sony”.
- To program, use the Pioneer/Sony/Other radio function mapping order for CDR171 units.
- When programming the SWI-RC, if a function is not supported (or not desired), then the function MUST be skipped as per the PAC SWI-RC instructions.
| FunctionOrder | FunctionMapping | SWI-RC (3.3VDC Reference) | |
| Center Pin (Ring) Volt- age(Function Select) | Tip Pin Voltage | ||
| 1 | Volume + | H 5.0v | 2. |
| 2 | Volume – | H 5.0v | 2. |
| 3 | Mute | H 5.0v | 1. |
| 4 | Preset + | L 0.0V | 2. |
| 5 | Preset – | L 0.0V | 2. |
| 6 | Source | H 5.0v | 0.60 |
| 7 | Seek + / Track + | H 5.0v | 2. |
| 8 | Seek – / Track – | H 5.0v | 2. |
| 9 | Band | H 5.0v | 3. |
| 10 | BT Talk | L 0.0V | 0.60 |
| 11 | BT End | L 0.0V | 1. |
Notes
Troubleshooting
| General | ||
| Problem | Cause | Action |
| Unit will not turn on(no power) voltage | Yellow wire not connected or incorrect voltage Red wire not connected or incorrect | Check connections for proper voltage I11-16VDC) |
| Black wire not connected | Check connection to ground | |
| Fuse blown | Replace fusels) | |
| Unit has power(but no sound) | Speaker wires not connected | Check connections at speakers |
| One or more speaker wires touching each other or touching chassis ground | Insulate all bare speaker wires from each other and chassis ground | |
| Unit blows fusels) | Yellow or red wire touching chassis ground | Check for pinched wire |
| Speaker wires touching chassis ground | Check for pinched wire | |
| Incorrect fuse rating | Use fuses with correct rating | |
| Unit has audio(but no video) | Parking brake safety circuit not connected Parking brake not applied | Check connections at parking brakeApply parking brake as described on page 26 |
| No video display(when in reverse) | Reverse circuit not connected Vehicle is not in reverse | Check connections at reverse lamp Select reverse gear |
| DVD does not startplayback | Physical defect in media Wrong region | Check media for scratchesUse discs labeled “Region 1” or “All” only |
| IR remote does not work | Dead battery | Replace battery |
| Excessive skipping | Unit is not mounted correctly | Check mounting sleeve |
| Physical defect in media | Check media for scratches |
For Your Records
Please keep your original sales receipt and be prepared to provide this receipt in the event you require service, as your original receipt is considered the bestproof of purchase and indicates the date you purchased your Jensen product.
Dealer Name___________________Dealer Phone___________________Purchase Date__________________
Register Your Product
Register your product online at www.jensenmobile.com.
Specifications
| Disc | Frequency response: 20Hz-20kHzChannel separation @ 1kHz: >80dBD/A converter: 24 Bit |
| FM Tuner | Tuning range: 87.5MHz-107.9MHzUsable sensitivity: 10dBf50dB quieting sensitivity: 20dBfStereo separation @ 1kHz: 38dBFrequency response: 30Hz-13kHz |
| AM Tuner | Tuning range: 530kHz-1710kHzUsable sensitivity: 24uVFrequency response: 30Hz-2.3kHz |
| Front USB | Compatibility: High Speed USB 2.0USB Class: Mass storage class |
| Monitor | Panel size: 7” diagonal measurementView angle (up/down/left/right): 50/70/70/70Resolution: 800 (H) x 480 (V)Brightness (cd/m 2 ): 250Contrast ratio: 500:1Pixels: 1,152,000 |
| General | Speaker output impedance: 4 ohmsLine output voltage: 4 volt RMSLine output impedance: 200 ohmsChassis dimensions: 7″ x 7″ x 2″ (W x D x H)Design and specifications subject to change without notice. |
CEA-2006 Power Standard Specifications (reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)Power Output: 16 Watts RMS x 4 channels at 4 ohms and < 1% THD+NSignal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)
Limited One Year (Or Two Year*) Warranty
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.Namsung America Inc warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.Namsung America Inc agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase.Subsequent replacement products are warranted for the balance of the original warranty period.Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized JENSEN dealer and used in the U.S.A.What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure tofollow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.jensenmobile.com.Warranty CoverageLimited 1-year warranty when purchased from an authorized Jensen dealer. or*Limited 2-year warranty when purchased from and professionally installed by an authorized Jensen dealer.(Proof of purchase and Installation required)
What to do?
- Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
- If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
- Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
- For more information and for the location of the nearest authorized service center, please contact us by one of the following methods:• Call us toll-free at (888) 921-4088• E-mail us at Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Customer Support1-888-921-4088(Monday-Friday, 9AM-5PM EST)Visit https://www.jensenmobile.comDesigned and Engineered in USA
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, orother electronic or mechanical methods, without the prior written permission of SAMSUNG AMERICA INC.
Namsung America Inc.©2021 Namsung America Inc.All rights reserved.
NSC0721-V01
References
[xyz-ips snippet=”download-snippet”]