We love that you are rocking JLab Audio! We take pride in our products and fully stand behind them.
| YOUR SATISFACTION IS GUARANTEEDYou may exchange or return merchandise within 30 days of the purchase date. Learn more at jlabaudio.com/guarantee | |
| YOUR WARRANTYYou may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage. | |
| CONTACTthe US Reach out to us at [email protected] or visit jlabaudio.com/contact |
FIRST TIME SETUP: BLUETOOTH PAIRING
- Turn on the Bluetooth in your device settings.
- Select “JLab Epic ANC” in your device settings to connect.When the headphones are paired, the voice prompts “You are connected” and blue light will flash slowly.
RECURRING USE
Once JLab Epic ANC has initially paired to your device, the earbuds will auto-connect to your Bluetooth device when powered back ON. (Follow BUTTON FUNCTIONS instructions)
WARNING
Make sure the USB door is closed and fastened. This will protect against sweat and water damage.
Before charging, JLab Epic ANC earbuds need to be fully dry.If there is any exposure to moisture, the internal components may become damaged.It is best practice to air dry before charging.
ACTIVE NOISE CANCELING
VOICE PROMPTS
“HELLO,”Power is ON.
“BATTERY FULL” = 100-75%“BATTERY MEDIUM” = 75-25%“LOW BATTERY” = Less than 25%“READY TO PAIR”JLab Epic ANC earbuds are ready to connect to your Bluetooth device.“YOU’RE CONNECTED”JLab Epic ANC earbuds are connected to your Bluetooth device and ready for use.“GOODBYE”Power turning OFF.
USING THE AUX ADAPTOR
CHARGING
Connect to computer or USB 5v 1A (or less) output device.
CONNECTION TROUBLESHOOTING
I DO NOT SEE JLAB EPIC ANC IN MY DEVICE
- Turn Bluetooth off and then back on in device settings.
- If you still do not see JLab Epic ANC, repeat FIRST TIME SETUP: BLUETOOTH PAIRING directions.
JLAB EPIC ANC DOES NOT RECONNECT TO MY DEVICE AFTER POWERING ON
- In device settings, forget the JLab Epic ANC.
- Turn Bluetooth off then back on in device settings.
- Repeat FIRST TIME SETUP: BLUETOOTH PAIRING directions.
BLUETOOTH IS CONNECTING TO AN UNWANTED DEVICE
Note: The JLab Epic ANC can remember up to 8 devices. It will try to auto-connect to the last device used.
|
|
ENHANCE YOUR EXPERIENCE WITH THE JLAB AUDIO APP:
- Shop your favorite products
- Get notified when we have deals
- Burn in your audio equipment
JLab Audio + Burn-in Tool
CAUTIONS
- Avoid getting moisture or liquids into the tip of the earbuds or charging port.
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
- Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in a safe location when not in use.JLABAUDIO.COM
References
[xyz-ips snippet=”download-snippet”]