Johan Lewis Podium Ribbed Wood Floor
Light User Manual
Thank you for purchasing this Podium floor lamp. Please read the instructions carefully before use to ensure safe and satisfactory operations of this product.Please keep this instruction for future reference.
Warnings!The supply cable runs through the inside of this product. Take care not to place undue stress on the cable whilst unpacking to prevent the possibility of a poor connection.If you are in any doubt consult a person competent to give advice on the assembly of electrical equipment.If the external flexible cable of the lamp is damaged it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard.To prevent electrocution switch off at the mains supply before assembling or maintaining this fitting. Ensure the plug is not connected to any power supply and read instructions before assembly.Always be sure to use the correct type and wattage of bulbs as indicated on the fitting. Never exceed the wattage stated.When changing the bulb, always switch off at the mains and allow the old bulb to cool down before handling. Dispose of used bulbs carefully.Caution! The bulb and surrounding parts can become hot during use. For indoor use only.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish. Replace bulbs from John Lewis or established brands of the same type and compatibility.
Parts list
Assembly
Ensure to switch off at the mains supply before assembling or maintaining this fitting.
Step 1
Unpack the product and remove all packaging. Be careful not to scratch the surface of the product whilst removing the wrapping. Lay the product out on the floor. If the floor is not carpeted please cover it with a soft cloth to avoid damage to the flooring and surface of the product. Assembly should take place with the product laying flat. Gently pull any excess cable through the hole in the base until the base meets the main upright pole. Turn the base onto the pole section keeping the pole parallel to avoid cross-threading. Keep the pole stationary and only rotate the base section. If not already pre-fitted, attach the protective foam pad onto the underside of the base of the product to protect the floor when in use.
Step 2
Fit the shades: Remove the shade ring from the lamp holder, fit the shade and replace the shade ring to secure it in place. Take care not to overtighten as this may cause damage to the fitting.Fit the bulb: type and wattage as indicated on the fitting The wattage indicated must not be exceeded.The floor lamp is now ready for use.
Recommended bulb
1 x 6-9 Watt energy-efficient LED GLSOr1 x 42 Watt E27 eco halogen GLSBulb not included
Specification
Max power: 60WVoltage: 220~240V, 50HzIP20Weight 3.3kg
Please retain these instructions for future reference.This symbol 
indicates that this product should not be treated as normal household waste and should be recycled. John Lewis does not operate in-store take back, but members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect condition. However, should any parts be damaged or missing please e-mail [email protected]
Troubleshooting:
Why is the light not working when switched on?Check your power supply is switched onTurn off the light and check that the bulb is inserted correctlyCheck the bulb is still in working order.
John Lewis partnership171 Victoria StreetLondon SW1E 5NNJohnlewis.comMade in China
References
[xyz-ips snippet=”download-snippet”]