Johan Lewis Tilt Marble Led Floor Light User Manual
Tilt Marble Led Floor Light
Recommended bulb1 x 21 Watt integrated energy efficient LED (non-replaceable)
SpecificationMax power: 21WVoltage: 220~240V, 50HzIP20 Weight 5.2Kg
Please retain these instructions for future reference.This symbol 
indicates that this product should not be treated as normal house-hold waste and it should be recycled. John Lewis does not operate in store take back, but as members of the Distributer Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
Trouble shooting:
Why is the light not working when switched on?Check your power supply is switched onTurn off light and check that the bulb is inserted correctlyCheck the bulb is still in working order. John Lewis partnership171 Victoria Street London SW1E 5NN Johnlewis.comMade in China Issue 02 09/19
Thank you for purchasing this Tilt Marble LED floor lamp. Please read the instructions carefully before use to ensure safe and satisfactory operations of this product.Please keep this instruction for future reference.
Warnings!
The supply cable runs through the inside of this product. Take care not to place undue stress on the cable whilst unpacking to prevent the possibility of a poor connection.If you are in any doubt consult a person competent to give advice on the assembly of electrical equipment.If the external flexible cable of the lamp is damaged it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. To prevent electrocution switch off at the mains supply before assembling or maintaining this fitting. Ensure the plug is not connected to any power supply and read instructions before assembly. Caution! The bulb and surrounding parts can become hot during use.For indoor use only. The light source of this luminaire is not replaceable; when the light source reaches the end of its end of life the whole luminaire shall be replaced.For indoor use only.
Care instructionsWe recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish.
Parts list
Assembly
Never assembly your appliance on a wet, freshly painted surface. Ensure to off at the mains supply before assembling or maintaining this fitting.
Step 1
Unpack the product and remove all packaging. Be careful not to scratch the surface of the product whilst removing the wrapping.Lay the product out on the floor. If the floor is not carpeted please cover it with a soft cloth to avoid damage to the flooring and surface of the product. Assembly should take place with the product lying flat. Rotate the centre pole onto the lamp holder/head section ensuring that the lamp holder section is kept still and that the pole is threaded on ensuring that the cable does not twist.
Step 2
Rotate the lower pole onto the centre pole section ensuring that the centre pole is kept still and that the pole is threaded on ensuring that the cable does not twist.
Step 3
Rotate the base section onto the pole assembly. Keep the poles parallel to avoid cross threading. Keep the upper poles stationary and only rotate the base section. Stand the floor lamp upright and ensure all the assembled parts are fully tightened.Floor lamp is now ready for use.
Read More About This Manual & Download PDF:
References
[xyz-ips snippet=”download-snippet”]