Arc Metal TableStock Number: 83601801
H76 W200 D95 cm
Thank you for purchasing the Arc Metal Table. Please read the instructions and warnings carefully before use, to ensure the safe and satisfactory operation of this product. At John Lewis, we are committed to making great products possible. From our in-house Design Team to our Buyers, we work together to bring great design to life. Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety, and quality of the product we sell. We are all committed to designing and developing products to the highest industry standards. We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
Important safety information
Warnings
The product should only be used on firm, level ground.Keep small parts ot of reach of children.Ensure the product is fully assembled as illustrated before use.
Do’s√ Check the pack and make sure you have all the parts listed.√ Check all screws or bolts are tightened and inspect regularly.√ Make sure the legs remain in contact with the ground at all times.
Dont’s× Do not over tighten screws or bolts.× Do not stand on the product.× Don does not use power tools to construct as overtightening and panel failure may occur.
Your Dining Table
| Ref | Description | H3 W200 D95 cm | Qty |
| 1 | Top Panel | H73 W38 D7 cm | 1 |
| 2 | Leg A | Dimensions | 2 |
| 3 | Leg B | H73 W38 D7 cm | 2 |
| 4 | Bottom Rail | H7 W115 D3 cm | 1 |
Fixtures and fittings
Product assembly
Arc Metal Table83601801
Arc Metal Table83601801
Safety Instructions
General warningsNever drag furniture when moving it, always lift it. Periodically check all fixings to ensure none have come loose and re-tighten where necessary. Please take care when handling or moving the furniture as careless handling may cause damage or injury. Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
Specific warnings for heavy itemsIt is recommended that before moving heavy objects to a new location they are completely disassembled to avoid personal injury or damage to the furniture. Please be careful to retain all fittings when doing this. (For fully or partial assemble items).
Care Instructions
Wood FurnitureWood displays different grain patterns depending on which way they cut – for example, the ‘medullary ray’ which can appear on oak furniture is a mark of good quality timber – these are just characteristics of the natural beauty of the wood. Some furniture is also deliberately aged and rustic.
All timber surfaces will change color and mellow over time. New furniture will initially vary in shade from items that have been previously purchased.
MetalDo not use any abrasive cleaner or harsh detergent as this can damage the surface.
Your feedback is very important to us and we would love to hear your comments on your new furniture. Pleasevisit our website to leave a review. Thank you.
Retain these instructions for future reference.John Lewis Partnership171 Victoria StreetLondon SW1E 5NNjohnlewis.com
References
[xyz-ips snippet=”download-snippet”]