JOHN LEWIS Charlie dining table Instructions
Reflex din. Tbl 160-240 extStock number : 836 06602
H75 W85 D160-240cm
Thank you for purchasing the Reflex din. Tbl 160-240 ext. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. At John Lewis, we are committed to making great products possible. From our in-house Design Team, to our Buyers, we work together to bring great design to life. Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety and quality of the product we sell. We are all committed to designing and developing products to the highest industry standards. We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
Tools required
Time to assemble30 Minutes
People to assemble
Important safety information
Warnings
- The product should only be used on firm, level ground.
- Keep small parts out of reach of children.
- Ensure the product is fully assembled as illustrated before use.
Do’s
- Check the pack and make sure you have all the parts listed.
- Check all screws or bolts are tightened and inspect regularly.
- Make sure the legs remain in contact with the ground at all times.
Don’ts
- Do not over tighten screws or bolts.
- Do not stand on the product.
- Do not use power tools to construct as overtightening and panel failure may occur.
Reflex din. Tbl 160-240 ext
Internal dimensionsStock number: 836 06602Reflex din. Tbl 160-240 extdining table , overall size: H75 W85 D160-240cm
Fixtures and fittings
Product assembly
Reflex din. Tbl 160-240 ext
Care and maintenance
Wood furniture
Wood displays different grain patterns depending on which way they are cut-for example, the ‘medullary ray’ which can appear on oak furniture is a mark of good quality timber-these are just characteristics of the natural beauty of the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow a distinctive pattern to be created on some surfaces, such as tabletops and drawer fronts by the way slivers are arranged.
All timber and veneer surfaces will change colour and mellow over time. New furniture will initially vary in shade from items that have been previously purchased.
How to care for your wood furniture
Your Calia furniture should be dusted or wiped over with a damp cloth. Do not use abrasive cleaner. Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface when building up overtime.
Make sure all surface are protected from heat and liquids by mats and coasters. Wipe up spills immediately and ensure that a mat or pad is placed under if you are writing.
Our furniture will endure most temperatures in the home, but it is best to avoid placing furniture next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack humidity caused by home heating can cause damage such as warping.
When the extension leaves are not being used, please use the storage bags provided to protect their surface when stored.
How often should the piece of furniture be treated with oil?
- Preferably already before use
- The surface should be treated when necessary, and we suggest as often as every three months
How do you apply the oil to the piece of furniture?
- Apply plenty of oil with a clean cloth. Table tops must be treated underneath as well as on the top side.(Do not drop oil on the floor!)
- After 15 minutes, polish with a sandpaper sponge or fine sandpaper (no. 150) along the grains of the wood
- Polish off remaining oil with a clean, dry cloth
- Do not use the item, until the oil is completely absorbedYour piece of furniture is already oil treated from the factory.
We recommend to use Woca “Worktop oil – natural” – item no. 5277 I 3AA (0,75 L) – available at http://www.wocadenmark.co.uk
Safety instructions
Never drag furniture when moving it, always lift it.Periodically check all fixings to ensure none have come loose and retighten when necessary.Please take care when handling or moving the furniture as careless handling may cause damage or injury.Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
Your feedback is very important to us and we would love to hear your comments on your new furniture. Please visit our website to leave a review. Thank you.
Retain these instructions for future reference.
John Lewis Partnership171 Victoria StreetLondon SW1E SNNjohnlewis.com
[xyz-ips snippet=”download-snippet”]