JOHN LEWIS Crystal Droplet Easy
Introduction
Thank you for purchasing this Crystal Droplet Easy Fit. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.
Warnings
This product is Class I and must be earthed. This fitting should be fitted in accordance with IEE Regulations and the Buildin Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your Local Authority. To prevent electric shock,switch off at the mains supply before installing or maintaining this fitting. Ensure otherpersons cannot restore the electricity supply without your knowledge. If you are in any doubt, please consult a qualified electrician. If replacing an existing fitting, make a note of the connections. Always use the correct type and power bulb. Never exceed the power stated. When changing a bulb, always switch off at the mains and allow the old bulb to cool down before handling. Dispose of used bulbs carefully.Caution! The bulb and surrounding parts can become hot during use.
Parts list
Product assembly
Ensure the electricity is switched off at the fuse board.Step 1Remove the light bulb from the lamp holder (allow the bulb to cool down before handling). Remove shade ring from lamp holder.
Step 2Place top ring of the fitting over lamp holder, then secure fitting to lamp holder by replacing shade ring. Ensure the shade ring is firmly screwed to lamp holder.
Step 3Attach the correct type and wattage bulb to the lamp holder (bulb not included) Switch on the electricity supply at the fuse board.
Caring for your productWe recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish. Indoors use only.
Aftercare and Troubleshooting
Why is the light not working when switched on? Check your power supply is switched on Turn off light and check that the bulb is inserted correctly Check the bulb is still in working order. Replace bulbs from John Lewis or established brand of the same type and compatibility If you experience any unresolvable technical issues with the product, contact your nearest John Lewis & Partners shop or John Lewis & Partner Technical Support on 03301 230106.
Specification
- Recommended bulb: BC energy efficient LED GLS bulb or BC eco halogen GLS bulb
- Max. power: 1x40W
- Bulb not included
- Voltage: 220 –240V, 50Hz
- IP rating: 20
- Weight: 1.1kg
5 year guaranteeAt John Lewis & Partners we test every light to high quality standards so we are able to offer you a 5 year guarantee.
RecyclingThis symbol indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis & Partners do not operate instore take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
John Lewis Partnership171 Victoria StreetLondon SW1E 5NNjohnlewis.com
References
[xyz-ips snippet=”download-snippet”]