JOHN LEWIS Double Hoop Integrated Led Semi Flush User Guide

Table of Contents

DOUBLE HOOP INTEGRATEDLED SEMI-FLUSHUSER GUIDE

Introduction

Thank you for purchasing this Double Hoop Integrated LED Semi Flush. Please read the instructions carefully before use to ensure the safe and satisfactory operation of this product.

WarningsThis product is Class II.This fitting should be fitted in accordance with IEE Regulations and the Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your Local Authority. To prevent electric shock, switch off at the mains supply before installing or maintaining this fitting. Ensure other persons cannot restore the electricity supply without your knowledge.If you are in any doubt, please consult a qualified electrician.If replacing an existing fitting, make a note of the connections.The flexible cable of this product is not replaceable. If damaged, the product shall be disposed of.It is the installer’s responsibility to ensure that the fixings and wall plugs used are suitable for the surface you are fixing your product onCAUTION! The LED Module and surrounding parts can become hot during use.

Parts list

Description	Image	Quantity

Integrated LED

LED Lifespan: Up to 25,000 hoursColour Temperature: Bright White24Watt / 1400 Lumens LED Nonreplaceable

Product assembly

Ensure the mains electricity supply switched off at the fuse board.

Step 1 If removing an existing fitting, note down all wiring connections. Ensure that the bracket (supplied) is fixed to a wooden joist in the ceiling using screws (supplied) or use a suitable fixing to the ceiling which will support the weight of the fitting. The weight of the fitting must be supported by the suspension bracket and not the flexible cable.

Step 2Connect cables to terminals as shown below.

Check all wires are tight in the terminal block and no loose strands are left out. Cover with insulating tape (not included).Step 3Push up ceiling cup and secure with metal grub screws. Step 4Switch on the electricity supply at the fuse board.

Caring for your product

Indoor use onlyNon-DimmableReplace bulbs from John Lewis or established brand of the same type and compatibilityRecommended the fitting should be cleaned with a soft dry cloth.

Aftercare and Troubleshooting

Why is the light not working when switched on?Check your power supply is switched onIf you experience any unresolvable technical issues with the product, contact your nearest John Lewis & Partners shop or John Lewis & PartnersTechnical Support on 03301 230106.

Specification

Integrated Led energy-efficient LED ModuleRated power: 24W Max.LED light source included NON-REPLACEABLEVoltage: 220 –240V, 50HzIP rating: 20Weight: 0.98kg

5-year guarantee

At John Lewis & Partners we test every light to high-quality standards so we areable to offer you a 5-year guarantee.

Recycling

This symbol indicates that this product should not be treated as normal household waste and should be recycled. John Lewis & Partners do not operate instore take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.