JOHN LEWIS Finn Integrated Led Semi Flush User Guide

Table of Contents

JOHN LEWIS Finn Integrated Led Semi Flush User Guide

Finn Integrated Led Semi Flush

Caring foryour product	Indoor use onlyNon-DimmableReplace bulbs from John Lewis or established brand of the same type andcompatibilityRecommended the fitting should be cleaned with a soft dry cloth.
Aftercare andTroubleshooting	Why is the light not working when switched on?Check your power supply is switched onIf you experience any unresolvable technical issues with the product,contact your nearest John Lewis & Partners shop or John Lewis & PartnersTechnical Support on 03301 230106.
Specification	Integrated Led energy efficient LED ModuleRated power: 24W MaxLED light source included, NON REPLACEABLEVoltage: 220 –240V, 50HzIP rating: 20Weight: 2.5kg
5 year guarantee	At John Lewis & Partners we test every light to high quality standards so we areable to offer you a 5 year guarantee.
Recycling	This symbol indicates that this product should not be treated ashousehold wastenoanrmd aitl should be recycled. John Lewis & Partners do notoperate instore take back, but as members of the Distributor Take Backscheme have funded the development and upgrade of recycling facilitiesacross the UK. Please take it to your nearest collection facility or for furtherdetails contact your local council or visit www.recycle-more.co.uk.
John Lewis Partnership171 Victoria StreetLondon SW1E 5NNjohnlewis.comMade in China	Please retain these instructions for future reference

Introduction

Thank you for purchasing this Finn Integrated LED Semi Flush.Please read the instructions carefully before use to ensure safe andsatisfactory operation of this product.

Warnings

This product is Class II.This fitting should be fitted in accordance with IEE Regulations and the BuildingRegulations. If in any doubt, or where required by law, consult a competentperson who is registered with an electrical self-certification scheme.Further information is available online or from your Local Authority.To prevent electric shock,switch off at the mains supply before installing ormaintaining this fitting. Ensure other persons cannot restore the electricity supplywithout your knowledge.If you are in any doubt, please consult a qualified electrician.If replacing an existing fitting, make a note of the connections.The flexible cable of this product is not replaceable. If damaged, the product shall bedisposed of.It is the installer’s responsibility to ensure that the fixings and wall plugs used aresuitable for the surface you are fixing your product onCAUTION! The LED Module and surrounding parts can becomehot during use.

Integrated LED

LED Lifespan: Up to 25,000 hoursColour Temperature: Bright White24Watt / 1440Lumens LED Non replaceable

Product assembly

	Ensure the mains electricity supply switched off at thefuse board.Step 1If removing an existing fitting, note down all wiring connections.Ensure that the bracket (supplied) is fixed to a woodenjoist in the ceiling using screws (supplied) or use asuitable fixing to the ceiling which will support theweight of the fitting.The weight of the fitting must be supported by thesuspension bracket and not the flexible cable.
	Step 2Connect cables to terminals as shown below. Check all wires are tight in the terminal block and noloose strands are left out.Cover with insulating tape (not included).
	Step 3Push up ceiling cup and secure with metal grub screws.
	Step 4Switch on the electricity supply at the fuse board.