Jura 72167 WiFi Connect
Instructions for use
Proper useThe WiFi Connect may only be used with specified JURA coffee machines. It provides wireless communication between the coffee machine and various accessories (for compatible devices see jura.com). Use for any other purpose will be deemed improper. JURA cannot accept any responsibility for the consequences of improper use.
WiFi Connect at a glance
- LED: Indicates the status of the WiFi Connect.
- Connector: Inserted into the service socket on the coffee machine.
Installation
The WiFi Connect must be inserted into the coffee machine’s service socket. This is usually on the top or back of the machine, beneath a removable cover. If you don’t know where the service socket of your coffee machine is, ask your dealer or visit jura.com.
- Plug the WiFi Connect into the coffee machine’s service socket. In order for your machines to communicate wirelessly, connect them to a network.
- Configure the network via J.O.E.® – your JURA app. To do this, enter the network name (SSID) and the password.
LED indicators
- LED does not light up: The coffee machine is switched off; the WiFi Connect is not being supplied with power.
- LED lights up: The wireless connection between the WiFi Connect and the accessory has been established.
- LED flashes (1× / second): The network has not been configured.
- LED flashes (2× / second): Attempting to establish a wireless connection.
- The LED lights up on an alternating basis for 5 sec. and pauses for 1 sec.: WiFi Connect cannot establish a connection.
Connecting to other devices
WiFI Connect can be used for various accessories with wireless capabilities (e.g. Cool Control) and J.O.E.®.
- Switch on the accessory and the coffee machine. If a device is switched off and then on again, the wireless connection is re-established automatically.
- Your WiFi Connect must also be activated in your automatic coffee machine. You can do this in the machine settings. Find out more at jura.com/wifi.
- If several machines with Cool Control are connected to the wireless network, the machine with the strongest signal is addressed.
Resetting WiFi Connect (and/or security PIN) to factory setting
If you experience any general problems with the WiFi Connect (e.g. a connection problem), it can be reset to the factory setting.
- Connect WiFi Connect to your Cool Control.
- Press and hold the off button for 3 seconds.
- WiFi Connect will also be reset if you reset your automatic coffee machine to the factory settings while WiFi Connect is connected.
- WiFi Connect will also be reset if you disconnect the connection to WiFi Connect in the machine settings for your automatic coffee machine.
ContactJURA Elektroapparate AG, Kaffeeweltstrasse 10, CH-4626 Niederbuchsiten,Tel. +41 (0)62 389 82 33You will find additional contact details for your country at jura.com.
Declaration of Conformity: jura.com/conformityThis device complies with Industry Canada licence-exempt RSS standard(s) and part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
JURA Products Ltd warranty conditions
For this machine, which was designed and built for domestic use, JURA Products Ltd, Vivary Way, Colne, Lancashire offers to the end customer, in addition to the rights of guarantee from the retailer, a manufacturer’s warranty with the following terms and conditions:
25 months from the date of initial purchase
- For products which are subject to selective distribution, the manufacturer’s warranty shall only apply if the JURA machine was purchased at an authorised JURA specialised dealer.
- JURA shall remedy all defects within the warranty period. JURA shall decide whether to remedy the defect by repairing the machine, replacing defective parts or replacing the machine. The performance of warranty services shall not cause the warranty period to be extended or restarted. Replaced parts shall become the property of JURA.
- A warranty service is not applicable for damage or defects caused by incorrect connection, incorrect handling or transport, repair attempts or modifications by unauthorised persons or non-compliance with the instructions for use. In particular, the warranty shall be void if JURA’s operating or maintenance instructions are not followed or if maintenance products other than JURA water filters, JURA cleaning tablets or JURA descaling tablets are used which do not correspond to the original specifications. Wearing parts (e.g. seals, grinding discs, valves) are excluded from the warranty, as is damage caused by foreign bodies entering the grinder (e.g. stones, wood, paper clips).
- The sales receipt, specifying the purchase date and machine type, must be provided as evidence of warranty claims. In order to simplify the process, the sales receipt should also include the following information where possible: name and address of the customer and serial number of the machine.
- If the end customer is a company or a legal person, or if the machine is not used in a domestic environment, the manufacturer’s warranty is valid for 12 months.
- Warranty services are performed in the United Kingdom. For machines purchased in Europe and taken to another European country, services shall be performed in accordance with the JURA warranty conditions applicable in this country.
- The warranty services shall be performed in the United Kingdom after prior consultation with the service hotline 0844 257 92 29 (charged at local rates) by sending or handing over the product to
JURA Products Ltd.
Service hotline: 0800 304 7470E-Mail: [email protected]Availability: Monday to Friday 9 a.m. – 5.00 p.m.Service centre address: JURA Products Ltd. Vivary Mill Vivary Way Colne, Lancashire BB8 9NWDistributor address: JURA Products Ltd. Vivary Mill Vivary Way Colne, Lancashire BB8 9NW or at other authorised JURA service centres (see jura.com).
International guarantee for all other countries
For this machine, which was designed and built for domestic use, JURA AG offers to the end customer, in addition to the rights of guarantee from the retailer, a manufacturer’s warranty with the following terms and conditions:
25 months from the date of initial purchase
- For products which are subject to selective distribution, the manufacturer’s warranty shall only apply if the JURA machine was purchased at an authorised JURA specialised dealer.
- JURA shall remedy all defects within the warranty period. JURA shall decide whether to remedy the defect by repairing the machine, replacing defective parts or replacing the machine. The performance of warranty services shall not cause the warranty period to be extended or restarted. Replaced parts shall become the property of JURA.
- A warranty service is not applicable for damage or defects caused by incorrect connection, incorrect handling or transport, repair attempts or modifications by unauthorised persons or non-compliance with the instructions for use. In particular, the warranty shall be void if JURA’s operating or maintenance instructions are not followed or if maintenance products other than JURA water filters, JURA cleaning tablets or JURA descaling tablets are used which do not correspond to the original specifications. Wearing parts (e.g. seals, grinding discs, valves) are excluded from the warranty, as is damage caused by foreign bodies entering the grinder (e.g. stones, wood, paper clips).
- The sales receipt, specifying the purchase date and machine type, must be provided as evidence of warranty claims. In order to simplify the process, the sales receipt should also include the following information where possible: name and address of the customer and serial number of the machine.
- If the end customer is a company or a legal person, or if the machine is not used in a domestic environment, the manufacturer’s warranty is valid for 12 months.
- Guarantee and service is available in all countries where this product is officially distributed by JURA. In countries where JURA does not distribute the product, please contact JURA International Headquarters.
JURA International Headquarters, SwitzerlandHomepage: jura.comPhone number: +41 62 389 82 33Fax: +41 62 389 81 37E-Mail: [email protected]Address: JURA Elektorapparate AGKaffeeweltstrasse 104626 NiederbuchsitenSwitzerland
References
[xyz-ips snippet=”download-snippet”]